• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.163-167
• /
• 2013

As the mobile services have been increased, the interference of the neighboring base stations is increased and the PIMD(Passive Inter-Modulation Distortion) has been a main issue for the design of base station antenna systems. In this paper, it is proposed the PIMD test method for the active basestation antenna whose radiators are directly connected with main active parts including amplifiers, and we presents its test results using a developed active basestation antenna. From the results, the active basestation antenna has the better PIMD performance than conventional passive structure by 8.4dB. The proposed PIMD test method can be used to get the accurate PIMD test result because the test environment is very similar with real basestation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.6
• /
• pp.1-7
• /
• 2017

This Paper Addresses a Performance Enhancement of Multitude Receivers Communicating with a Basestation. A General Link between Basestation and Terminal is that a Basestation is connected with Multitude Receivers and Time, Frequency and Code are shared and used among them. We propose an Algorithm of Enhancing Receiver Capability at the Receiver when access Point of Acting as a Basestation in this Environment Modifies Transmission Data Separately to be sent. In the Proposed Algorithm, we configure Transmit Data to Use Maximal Ratio Combining Technique in the Receiver, and Estimate Transmitter Signal per Each Receiver and Simulate Bit Error Rate and Show the Performance Results.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.443-448
• /
• 2003

Ministry of Information and Communication(MIC) requires telecompanys to be base station sharing in order to prevent the duplicated investment and environmental destruction due to indiscreet constructions of a basestations for enlarging its own service area among telecompanys. This paper discussed the troubles of mobile communication services to be generated in common-basestation at the subway, such as factors of power obstacles, communication equipment and establishment obstacles. The content of this paper is helpful in organizing the basestation sharing of IMT-2000 and the 4th generation mobile system, and provides the basic of a higher quality service for common-service communication.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.2
• /
• pp.95-101
• /
• 2012

In order to supply emotion service depending on user's emotional change in a mobile environment, various researches have been carried. This paper discusses a protocol for wireless charging and an embedded platform of the mobile emotional sensing device which supports that. Wireless charging process relieves user's vexatious task to charge the emotional sensing device. To support wireless charging, there are one basestation and several mobile devices. Basestation coordinates and controls the devices over wireless communication, as well as supplies energy. For 1:N communication we defines the network whose superframe is classified into four categories: a network join superframe, a charging request superframe, a charging superframe and an inactive superframe. Physical layer provides how to supply energy to the devices and communicate physically. Mobile device is equipped with energy charged circuits, which correspond with the defined energy supplying method, as well as bidirectional communication circuits. Mobile device monitors and analyzes its own battery status, and is able to send a request packet to basestation. Therefore, it can be charged before its battery is exhausted without user's perception.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.1-7
• /
• 1998

In this paper, SMD type backward wave 3dB coupler for PCS basestation application was designed, fabricated and measured. We designed that it could be replaced for commercial basestation system and it was 0.56 $\times$ 0.35 inches size. The test results show that coupler is well operated within frequency range of 1.75 ~ 1.98GHz, which is defined on PCS system. The coupler reveals insertion loss 0.295dB, isolation -30.31dB, amplitude balance 0.05dB, phase balance 0.02$^{\circ}$, input and output impedance matching -30.38dB, -39.72dB, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1747-1753
• /
• 2001

This paper describe the design and fabrication of a SMD type Wilkinson power divider for PCS basestation. It has been designed for commercial power amplifier system by HP-ADS and fabricated with the size 0.56 $\times$ 0.35 inches. As a result, the power divider was well-operated in the frequency ranges of 1.75 ∼ 1.98GHz for the application of PCS system. The power divider reveals insertion loss 0.2dB, isolation -19.8dB, amplitude balance 0.02dB, phase balance 0.5o, input and output impedance matching -20.6dB respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.740-745
• /
• 2005

This paper concerns estimating a desired signal in a multipath environment using linearly constrained array processor with master-slave type array processing and spatial smoothing method in GSM system. In computer simulation, it is shown that the spatial smoothing approach performs better than the master-slave type array processing while both methods perform better than linearly constrained array processing with respect to SINR and BER performances.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.363-644
• /
• 1997

This paper presents the design and fabrication of a shaped-beam array antenna which will be used for a PCS basestation using structure that is coupled to a microstrip line by an aperture on the interening ground plane. The shaped-beam pattern is obtained by an antenna synthesis method. An array antenna considering the mutual coupling between array elements patches) and a feeding network are designed by CAD tools. The feeding network is designed by using the Wilkinson power divider to obtain the optimized shaped-beam. The designed results are compared with the measured data.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.650-652
• /
• 2003

무선 통신 기술의 발전으로 무선망에서 멀티이디어 사용자의 수가 급격히 증가하고 있으며 서비스 질에 대한 요구가 증가하고 있다. 하지만 모바일 컴퓨팅 환경에서는 무선 링크의 취약성과 사용자의 이동성으로 인해 연속 멀티미디어 스트리밍 서비스를 제공하기 어렵다. 본 논문에서는 핸드오프로 인한 지연이나 패킷 손실 없이 사용자에게 멀티미디어 서비스를 제공하기 위해서 지능형 버퍼링 핸드오프 프로토콜과 Pre-customization 기법을 제안한다. 지능형 버퍼링 핸드오프 프로토콜은 핸드오프 중에 모바일 호스트가 이동할 셀의 Basestation에 미리 패킷을 버퍼링하고 MH가 새로운 셀로 이동했을 때. 즉시 패킷을 전송할 수 있게 한다. 그리고 핸드오프 동안 Basestation은 Pre-Customization을 통해 미리 멀티미디어 데이터를 무선 링크 상태와 단말기 수용성. 사용자 선호도를 고려한 필터링을 항으로써 QoS 재협상 없이 서비스를 제공한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.336-342
• /
• 2017

Recently, there has been an increasing need for underwater communication systems to monitor ocean environments and prevent marine disasters, as well as to secure ocean resources. Most underwater communication systems adopted acoustic communication with a consideration of attenuation, absorption, and scattering in conductive sea water, and developed fully digital modems based on processors. In this study, a digital up converter (DUC) and a digital down converter (DDC) was developed for an underwater basestation based on underwater acoustic communication systems. Because one of the most important issues in underwater acoustic communication systems is low power consumption due to environmental problems, this study developed a specific hardware module for DUC and DDC. It supported four links of underwater acoustic communication systems and converted the sampling rate and frequency. The systemwas designed and verified using Verilog-HDL in ModelSim environment with the test data generated from baseband layer parts for an underwater base station.