• Title/Summary/Keyword: baseline model

Search Result 848, Processing Time 0.028 seconds

A Feasibility Review for an Uneven Baseline Basis Minimal Ballast Ship

  • Kang, Hee Jin;Kim, Kwang-Soo;Choi, Jin;Lee, Yeong-Yeon;Ahn, Haeseong;Yim, Geun-Tae
    • Journal of Ocean Engineering and Technology
    • /
    • v.34 no.1
    • /
    • pp.1-12
    • /
    • 2020
  • Although there are many kinds of advanced ballast water management systems, pioneering studies for ballast-water free ship and minimal ballast water ship concepts are in progress. In this study, the existing alternatives of ballast water are reviewed and a new design concept is studied on the basis of the existing bulk carrier hull form. To develop a new design alternative which has minimal ballast for ballast water discharge free operation, the new concept should have technical feasibilities that are related to the role of the ballast water, berth access, loading constraints, etc. For this purpose, a simplified systems engineering basis design approach is adopted using a business model as the system analysis and control tool. To check the performance feasibility of the new concept, ship resistance performance is reviewed based on a model scale ship resistance performance analysis.

An Analysis of the Impact of Coronavirus Disease (COVID-19) on the Korean Beef Cattle Market and Farm Labor Demand for Korean Beef Cattle (코로나19가 한육우 시장 및 한육우 농가 인력수요에 미치는 영향분석)

  • Kim, In-Seck
    • Korean Journal of Organic Agriculture
    • /
    • v.28 no.2
    • /
    • pp.171-188
    • /
    • 2020
  • The Coronavirus disease (COVID-19), first identified in China in December 2019, has widely spread worldwide and is an ongoing pandemic. It is expected that the ripple effect of COVID-19 on the global economy including the agricultural sector will increase substantially if not properly controlled shortly. This study examines the potential impact of COVID-19 on the Korean beef cattle sector and farm labor demand for Korean beef cattle using a dynamic partial equilibrium model. The agricultural production value and farm labor demand for Korean beef cattle in the scenario assuming pessimistic GDP growth rate (-1.2% in 2020) with no direct supply shocks fell by up to 4.00% and 0.67%, respectively, compared to the baseline which represents the future without COVID-19 outbreak. On the other hand, the agricultural production value and farm labor demand for Korean beef cattle in the scenario assuming both pessimistic GDP growth rate and supply shocks (-12.7% beef imports and + 2.4% feed cost in 2020) increased by up to 12.08% and 1.99%, respectively, compared to the baseline.

An Analysis of the Impact of US Beef Import Tariff Rate Changes on the Korean Beef Cattle Market (미국산 쇠고기 수입관세율 변화가 한육우 시장에 미치는 영향분석)

  • Kim, Da-Hae;Kim, In-Seck
    • Korean Journal of Organic Agriculture
    • /
    • v.28 no.1
    • /
    • pp.31-57
    • /
    • 2020
  • Korea-US FTA amendment became effective January 1, 2019 through several trade negotiations between the two countries. These amendments did not include changes in the agricultural sector. However, given the policy direction of the Trump administration, it is difficult to be certain that the existing Korea-US FTA on the agricultural sector will remain unchanged. This study examines the potential impact of changes in the US beef import tariff rates under the Korea-US FTA, which is progressively eliminated until 2026 using a dynamic partial equilibrium model. The modelling system is simulated with 100% decreases of tariff rates over 2020~2026 period and then compared to the baseline which is developed based on the current Korea-US FTA tariff rates. According to the scenario analyses results, 100% decreases of US beef tariff rate lowered Korean beef cattle production value up to 4.23%. Looking at this change in terms of absolute value rather than percentage, the total production value over 2020~2026 is expected to decrease by 815 billion won compared to Baseline. This reduction in production value in dynamic analysis is 67 billion won higher than the comparative static analysis.

Helicopter Trim Analysis and Flight Simulation by Uising DAE Based PPTA (Partial Periodic Trimming Algorithm) (DAE 해법과 PPTA(Partial Periodic Trimming Algorithm)를 이용한 헬리콥터 트림해석 및 비행 시뮬레이션)

  • Kim,Chang-Ju
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.31 no.1
    • /
    • pp.42-48
    • /
    • 2003
  • To get a periodic trim solution from Level II helicopter flight dynamic equations, DAE based PPT A (partial Periodic Trimming Algorithm) has been proposed. Iterative update of state variables from PPT A can cause a numerical instability in DAE solver which needs compatible initial conditions. By simply adjusting the order of DAE solver a periodic trim can be obtained with good accuracy. Application for CBM (Common Baseline Model) helicopter showed the same trim result as harmonic balance method and the effective elimination of unrealistic initial responses at the start of flight simulation.

I-QANet: Improved Machine Reading Comprehension using Graph Convolutional Networks (I-QANet: 그래프 컨볼루션 네트워크를 활용한 향상된 기계독해)

  • Kim, Jeong-Hoon;Kim, Jun-Yeong;Park, Jun;Park, Sung-Wook;Jung, Se-Hoon;Sim, Chun-Bo
    • Journal of Korea Multimedia Society
    • /
    • v.25 no.11
    • /
    • pp.1643-1652
    • /
    • 2022
  • Most of the existing machine reading research has used Recurrent Neural Network (RNN) and Convolutional Neural Network (CNN) algorithms as networks. Among them, RNN was slow in training, and Question Answering Network (QANet) was announced to improve training speed. QANet is a model composed of CNN and self-attention. CNN extracts semantic and syntactic information well from the local corpus, but there is a limit to extracting the corresponding information from the global corpus. Graph Convolutional Networks (GCN) extracts semantic and syntactic information relatively well from the global corpus. In this paper, to take advantage of this strength of GCN, we propose I-QANet, which changed the CNN of QANet to GCN. The proposed model performed 1.2 times faster than the baseline in the Stanford Question Answering Dataset (SQuAD) dataset and showed 0.2% higher performance in Exact Match (EM) and 0.7% higher in F1. Furthermore, in the Korean Question Answering Dataset (KorQuAD) dataset consisting only of Korean, the learning time was 1.1 times faster than the baseline, and the EM and F1 performance were also 0.9% and 0.7% higher, respectively.

Crack detection method for step-changed non-uniform beams using natural frequencies

  • Lee, Jong-Won
    • Smart Structures and Systems
    • /
    • v.30 no.2
    • /
    • pp.173-181
    • /
    • 2022
  • The current paper presents a technique to detect crack in non-uniform cantilever-type pipe beams, that have step changes in the properties of their cross sections, restrained by a translational and rotational spring with a tip mass at the free end. An equation for estimating the natural frequencies for the non-uniform beams is derived using the boundary and continuity conditions, and an equivalent bending stiffness for cracked beam is applied to calculate the natural frequencies of the cracked beam. An experimental study for a step-changed non-uniform cantilever-type pipe beam restrained by bolts with a tip mass is carried out to verify the proposed method. The translational and rotational spring constants are updated using the neural network technique to the results of the experiment for intact case in order to establish a baseline model for the subsequent crack detection. Then, several numerical simulations for the specimen are carried out using the derived equation for estimating the natural frequencies of the cracked beam to construct a set of training patterns of a neural network. The crack locations and sizes are identified using the trained neural network for the 5 damage cases. It is found that the crack locations and sizes are reasonably well estimated from a practical point of view. And it is considered that the usefulness of the proposed method for structural health monitoring of the step-changed non-uniform cantilever-type pipe beam-like structures elastically restrained in the ground and have a tip mass at the free end could be verified.

An Ex-post Analysis of the Impact of the Korea-US FTA on the Korean Beef Cattle Industry - Focused on Jeonnam Province - (한·미 FTA가 한육우 산업에 미친 영향에 대한 사후적 평가 - 전남지역을 중심으로 -)

  • Seo, Joon-Young;Kim, In-Seck
    • Korean Journal of Organic Agriculture
    • /
    • v.31 no.3
    • /
    • pp.211-228
    • /
    • 2023
  • The Korea-US FTA was one of the most controversial FTAs Korea has ever signed and was expected to have a significant effect on the agriculture sector, especially the livestock industry. This study ex-post analyzed the impact of the Korea-US FTA on the Korean beef industry including the Jeonnam province using a dynamic partial equilibrium model. According to the scenario analysis results, if there was no Korea-US FTA, the beef imports would be reduced to as low as 0.24% to 4.19% compared to the Baseline applying existing Korea-US FTA beef tariff rates over the 2012 to 2022 periods. In addition, if there was no Korea-US FTA, the agricultural product value of Jeonnam and national Korean beef cattle would increase from 0.25% to 7.37% and 0.25% to 7.33%, respectively, compared to the Baseline. The results of the analysis are expected to be used as important information for policy establishment in preparation for CPTPP and supplementation of current FTA policies regarding Korean beef cattle not only for the central government but also Jeonnam province.

A Comparison Study of Runoff Projections for Yongdam Dam Watershed Using SWAT (SWAT모형을 이용한 용담댐 유역의 유량 전망 결과 비교 연구)

  • Jung, Cha Mi;Shin, Mun-Ju;Kim, Young-Oh
    • Journal of Korea Water Resources Association
    • /
    • v.48 no.6
    • /
    • pp.439-449
    • /
    • 2015
  • In this study, reliable future runoff projections based on RCPs for Yongdam dam watershed was performed using SWAT model, which was validated by k-fold cross validation method, and investigated the factors that cause the differences with respect to runoff projections between this study and previous studies. As a result, annual average runoff compared to baseline runoff would increase 17.7% and 26.1% in 2040s and 2080s respectively under RCP8.5 scenario, and 21.9% and 44.6% in 2040s and 2080s respectively under RCP4.5 scenario. Comparing the results to previous studies, minimum and maximum differences between runoff projections over different studies were 10.3% and 53.2%, even though runoff was projected by the same rainfall-runoff model. SWAT model has 27 parameters and physically based complex structure, so it tends to make different results by the model users' setting. In the future, it is necessary to reduce the cause of difference to generate standard runoff scenarios.

Laboratory model to evaluate efficacy of an experimental titanium oxide nanofibers bleaching agent

  • Clayton Tran ;Ellin Choi ;Brittany Watu;Udochukwu Oyoyo;Christopher Perry ;So Ran Kwon
    • Restorative Dentistry and Endodontics
    • /
    • v.46 no.4
    • /
    • pp.47.1-47.9
    • /
    • 2021
  • Objectives: This study aimed to use a laboratory model to evaluate the efficacy of an experimental bleaching agent. Materials and Methods: The model used human extracted molars that were treated and measured for bleaching efficacy. Teeth (n = 50) were distributed into 5 groups: Negative control (NC): immersion in water for 8 hours; Nanofibers (NFs): Experimental titanium dioxide nanofibers with stirring and light activation for 8 hours; Whitestrips (WS): Crest 3D White Glamorous White Whitestrips, 2 applications daily for 30 minutes, 14 days; 1% hydrogen peroxide (HP) standard: 1% hydrogen peroxide for 8 hours; and 30% HP standard: 30% hydrogen peroxide for 8 hours. Instrumental measurements were performed using a spectrophotometer. Results were recorded at baseline, 1-day post-bleaching, and 1-week post-bleaching. Kruskal-Wallis procedure was used to determine differences in color change. Pearson correlation was used to evaluate the relationship between visual and instrumental measurements. Tests of hypotheses were 2-sided with alpha = 0.05. Results: There was no significant difference in color parameters (L1, a1, b1, and shade guide units [SGU]) at baseline (p > 0.05). There was a significant difference among the groups for overall color change (ΔE*ab) and change in shade guide units (ΔSGU) at 1-day and 1-week post-bleaching (p < 0.05). The higher the HP concentration, the higher the color change as expressed in ΔSGU and ΔE*ab. The negative control exceeded the perceptibility threshold of ΔE* = 1.2 regardless of time point. NFs showed a decrease in chroma, but were not statistically different compared to the negative control. Conclusions: The laboratory model was successful in screening an experimental bleaching agent.

A Comparison of Control Methods for Small UAV Considering Ice Accumulation and Uncertainty (결빙 현상과 불확실성을 고려한 소형 무인항공기 제어기법 비교 연구)

  • Hyodeuk An;Jungho Moon
    • Journal of Aerospace System Engineering
    • /
    • v.17 no.5
    • /
    • pp.34-41
    • /
    • 2023
  • This paper applies the icing effect and wing rock uncertainty to small unmanned aerial vehicles (UAVs), which have recently attracted attention. Attitude control simulations were performed using various control methods. First, the selected platform, the Skywalker X8 UAV with blended wing-body (BWB) configuration, was linearized for both its baseline form, and a form with applied icing effects. Subsequently, using MATLAB SimulinkⓇ, simulations were conducted for roll and pitch attitude control of the baseline configuration and the configuration with icing effects, employing disturbance observer-based PID control, model reference adaptive control, and model predictive control. Furthermore, the study introduced wing rock uncertainty simultaneously with icing effects on the configured model-a combination not previously explored in existing research-and conducted simulations. The performance of each control Method was compared and analyzed.