• Journal of Broadcast Engineering
• /
• v.20 no.5
• /
• pp.756-769
• /
• 2015

In this paper, we propose a scalable coding method for high dynamic range (HDR) and standard dynamic range (SDR) videos based on Scalable High Efficiency Video Coding (SHVC). The proposed method has multi-layer coding architecture that consists of base layer for SDR videos and enhancement layer for HDR videos to support the backward compatibility with legacy codec and display devices. Also, to improve coding efficiency of enhancement layers, a global inverse tone mapping is applied to the reconstructed SDR video and the compensated frames are referred for coding of the enhancement layer. The proposed method is found to achieve BD-Rate gain of 43.0% on average (maximum 76.3%) for the enhancement layer and 15.7% on average (maximum 31%) for dual-layer against the SHM 7.0 reference software.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.669-679
• /
• 2013

When an image is converted from HDR (high dynamic range) to LDR (low dynamic range), a tone mapping process is the essential component. Many TMOs (tone mapping operators) have been motivated by human vision which has lower physical luminance range than that in real scene. The representative of human vision properties which motivate TMOs is the local adaptation. However, TMOs are ultimately compressing image information such as contrast, saturation, etc. and the compression causes defects in image quality. In this paper, in order to compensate the degradation of the image which is caused by TMOs, the visual acuity-based edge stop function is proposed for applying the property of human vision to base-detail separation. In addition, using CSF (contrast sensitivity function) which represents the relationship among spatial frequency, contrast sensitivity, and luminance, the sharpness filter is designed and adaptively applied to the detail layer in regard to surround luminance.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.344-346
• /
• 2016

본 논문에서는 양방향 필터와 (bilateral filter) 선형 사상 함수를 (linear mapping function) 이용한 역 톤매핑 (inverse tone mapping, iTMO) 알고리즘을 제안한다. 상용 HDR (high dynamic range) 디스플레이가 (display device) 보급됨에 따라 이미 존재하는 수 많은 LDR (low dynamic range) 영상을 활용하여 HDR 디스플레이에서 시청할 수 있도록 동적 범위를 (dynamic range) 확장하는 (expand) 역 톤 매핑 방법이 개발 되어야 한다. 여러 논문을 통해 다양한 역 톤 매핑 방법이 제안되어 왔는데, 대부분의 방법이 HDR 디스플레이의 동적 범위에 맞춰 LDR 영상의 동적 범위를 확장하는 것에 그쳤다. 확장하는 방법은 다양하지만, 동적 범위의 한계로 인해 LDR 영상에서 사라진 세부 사항을 (detail) 복원하는 것에는 전혀 효과적이지 않았다. 이에 본 논문에서는 LDR 영상의 동적 범위를 확장하는 것뿐만 아니라 LDR 영상에서 표현되지 못한 디테일을 복원하는 방법을 제안한다. 이를 위해 입력 영상에 양방향 필터를 적용하여 영상을 기본 계층과 (base layer) 세부 계층으로 (detail layer) 분해한 후 기본 계층에 대해서는 동적 범위에 맞게 확장하고, 세부 계층에 대해서는 디테일을 복원하기 위해 선형 사상 함수를 적용하였다. 실험을 통해서 다른 iTMO 방법에 비해 세부 사항을 효과적으로 복원할 수 있음을 확인할 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.8
• /
• pp.680-686
• /
• 2003

Digital waveguide model is a general method that is used in physical modeling of musical instruments. Wave motion is analyzed by time or by space in digital waveguide model. Because sampling is made via time, it is general that musical instrument model is described by wave motion of time. In this paper, we synthesized the musical instrument sound by adding instrument body model to the spatial based string model. In this way, we could improve sound quality and process musical instrument model's tone control variables effectively. We explained about delay error that happens in string and body in space based sampling and showed method to process fractional delay using FD (Fractional Delay)filter. Finally, we explained the relation between tone quality and number of delays. And we also compared the result with time base digital waveguide model.

• Journal of the Korean Society of Costume
• /
• v.61 no.10
• /
• pp.16-31
• /
• 2011

This paper aims to identify the similarities and differences of color preference for mountain climbing wear according to gender, season and item. Total of 749 photos of mountain climbers were taken in 2009 during weekends in May and October at two mountains in Seoul. In order to analyze color by hue and tone, all the data were digitalized using Photoshop and converted to HV/C by using the Munsell Conversion software. For the purpose of data analysis, 13 colors of hue, including 10 base colors of the Munsel color system plus white, gray and black, and 12 tones of PCCS were grouped into 5 groups according to close distance. Jumper, t-shirts, vest and pants were selected as the 4 item categories. Results showed that there were clear differences in color preference based on gender. Women, with a preference for red, reddish purple, black, purple and blue, displayed wider range of choices in color as compared to men, who preferred black and blue color throughout all seasons. Yellow, green, and greenish blue were less preferred by both men and women. For pants, black represented over 90% as the main color for both genders. Overall, men preferred dark tones and women preferred vivid and bright tones. Moreover, there were less distinct differences in color preference according to season and item.

• Journal of Broadcast Engineering
• /
• v.23 no.4
• /
• pp.474-483
• /
• 2018

In this paper, we propose a multi-scale high dynamic range (HDR) tone mapping algorithm using guided image filter (GIF). The GIF is used to divide an image into a base layer and a detail layer, then the range of the detail layer is reduced with a compression function to enhance the detail information of the image. However, in most cases, an image includes the detail and edge information in different scales. That is to say, it is difficult to represent all detail features under a certain scale, and a single-scale image decomposition method is not free from artifacts around edges. To solve the problems, the multi-scale image decomposition method is proposed. It utilizes the detail layers of several scale to determine how much edge is preserved. Experiment results show that the proposed algorithm has better image performance in preserving edge compared to conventional algorithm.

• Korean Institute of Interior Design Journal
• /
• v.25 no.2
• /
• pp.143-150
• /
• 2016

Color plan that contains corporate color of Seoul apartment has a great influence on city environment, considering high-rise vertical dispersion and extent. Therefore, it is necessary to view color plan from an integrative viewpoint. Here, this research aimed at deriving guideline factors of esthetic color plan based on city identity, by recognizing the importance of apartment color and color plan characteristic of recently built brand apartments. Exterior color plan characteristic of Seoul brand apartments seen in this research, first, most of dominance colors were in same color similar tone with warm color in bright and warm image, as the psychological function, accessory colors appeared in similar tone of similar color harmonious with the dominance color. Also, accent color was highlighted with its identity through cooperative color. Second, emotional effect diminished size and weight of high-rise apartment. The upper levels showed clear and clean image, middle to lower level showed stability and comfortable image, on the whole, refined and urbane image that aim for natural and modern image. Therefore, apartment color plan requires, first, in respect of dominance color, unity is required proper for urban image by preparing color permission limitation standard. Second, dominance color and accessory color require historicity and differentiation in sociality that urban identity gets. Third, high-rise upper level cooperative color accent color requires compatibility with urban landscape. Lastly, guideline along with rate is required for color, tone, and pattern, etc. by extent contrast. Here, apartment color plan requires consistent research as urban environment color, also, base study should be accelerated as a part of competitive city branding.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.278-287
• /
• 2015

PURPOSE. The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS. Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic polyamide resin (Bio Tone), thermoplastic acrylic resin (Acrytone) were used as materials for this study. One hundred five specimens were fabricated. For the color stability test, specimens were immersed in the coffee and green tee for 1 and 8 weeks. Color change was measured by spectrometer. Water sorption was tested after 1 and 8 weeks immersion in the water. For the test of cytotoxicity, cell viability assay was measured and cell attachment was analyzed by FE-SEM. RESULTS. All types of denture base resin showed color changes after 1 and 8 weeks immersion. However, there was no significant difference between denture base resins. All specimens showed significant color changes in the coffee than green tee. In water sorption test, thermoplastic acrylic resin showed lower values than conventional heat-polymerized acrylic resin and thermoplastic polyamide resin. Three types of denture base showed low cytotoxicity in cell viability assay. Thermoplastic acrylic resin showed the similar cell attachment but more stable attachment than conventional heat-polymerized acrylic resin. CONCLUSION. Thermoplastic acrylic resin for the non-metal clasp denture showed acceptable color stability, water sorption and cytotoxicity. To verify the long stability in the mouth, additional in vitro studies are needed.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.5
• /
• pp.361-366
• /
• 2018

PURPOSE. The aim of this study was to evaluate the effects of relining materials on the flexural strength of relined thermoplastic denture base resins (TDBRs). MATERIALS AND METHODS. For shear bond strength testing, 120 specimens were fabricated using four TDBRs (EstheShot-Bright, Acrytone, Valplast, Weldenz) that were bonded with three autopolymerizing denture relining resins (ADRRs: Vertex Self-Curing, Tokuyama Rebase, Ufi Gel Hard) with a bond area of 6.0 mm in diameter and were assigned to each group (n=10). For flexural strength testing, 120 specimens measuring $64.0{\times}10.0{\times}3.3mm$ (ISO-1567:1999) were fabricated using four TDBRs and three ADRRs and were assigned to each group (n=10). The thickness of the specimens measured 2.0 mm of TDBR and 1.3 mm of ADRR. Forty specimens using four TDBRs and 30 specimens using ADRRs served as the control. All specimens were tested on a universal testing machine. For statistical analysis, Analysis of variance (ANOVA) with Tukey's test as post hoc and Spearman's correlation coefficient analysis (P=.05) were performed. RESULTS. Acry-Tone showed the highest shear bond strength, while Weldenz demonstrated the lowest bond strength between TDBR and ADRRs compared to other groups. EstheShot-Bright exhibited the highest flexural strength, while Weldenz showed the lowest flexural strength. Relined EstheShot-Bright demonstrated the highest flexural strength and relined Weldenz exhibited the lowest flexural strength (P<.05). Flexural strength of TDBRs (P=.001) and shear bond strength (P=.013) exhibited a positive correlation with the flexural strength of relined TDBRs. CONCLUSION. The flexural strength of relined TDBRs was affected by the flexural strength of the original denture base resins and bond strength between denture base resins and relining materials.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.65-73
• /
• 2003

An experimental study on flame lift-off characteristics of propane jet flame highly diluted with nitrogen has been conducted introducing acoustic forcing with a tube resonant frequency. A flame stability curve is attained according to forcing strength and nozzle exit velocity for $N_2$ diluted flames. Flame lift-off behavior with forcing strength and nozzle exit velocity is globally categorized into three; a well premixed behavior caused by a collapsible mixing for large forcing strength, a coexistent behavior of well-premixed and edge flames interacting with well-organized inner fuel vortices for moderate forcing strengths, and edge flame behavior for small forcing strengths. Special focus is concentrated on the coexistent behavior of the flame base in lifted flame since this may give a hint to a possibility which the flame base behaves like a well-mixed premixed flame in highly turbulent lifted flames. It is also shown that the acoustic forcing to self-pulsating laminar lifted flame affects flame lift-off behavior considerably which is closely related to downstream flow velocity, mixture strength, effective fuel Lewis number, and flame stretch.