• 제목/요약/키워드: base pretreatment

검색결과 39건 처리시간 0.023초

광중합형 이장재와 금속의치상 간의 결합력에 관한 연구 (A Study on the Tensile Strength between Light-cured Relining Resin and Metal Denture Base)

  • 박인채;이준규;정재헌
    • 구강회복응용과학지
    • /
    • 제16권2호
    • /
    • pp.161-170
    • /
    • 2000
  • The use of autopolymerizing-cured resin and light-cured resin for direct relining of complete and partial dentures has been popular. This investigation compared the adhesion of autopolymerizing-cured reline resin(Tokuso Rebase, Mild Rebaron) or light-cured reline resin(Mild Rebaron LC, Lighton-U) to metal base or resin base. Cylindrical samples were made from metal($Biosil^{(R)}$) or heat-cured resin(QC-20) and were prepared to produce a flat bonding surface. Cylindrical metal samples were roughened by scratch or by scratch and sandblast and were treated with primer(MR Bond) after scratch and sandblast. And then, liners were prossesed to the cylindrical metal or resin samples according to the manufacturer's recomendations so as to bond metal base or resin base. The specimens were tested in pure tension by using an Instron Univasal testing machine for the four direct reline resins. The results were as follows ; 1. In comparison with tensile bond strength of material relined on resin base or metal base, the case of resin base produced significantly higher tensile bond strengths than the case of metal base. 2. Metal surface pretreatment or primer improved the tensile bond strength between the reline resin and the metal($Biosil^{(R)}$) base. 3. The tensile bond strengths of Mild Rebaron LC relined on resin base or metal base were similar to those of the other reline resins.

  • PDF

Resveratrol pretreatment alleviates NLRP3 inflammasome-mediated cardiomyocyte pyroptosis by targeting TLR4/MyD88/NF-κB signaling cascade in coronary microembolization-induced myocardial damage

  • Chang-Jun Luo;Tao Li;Hao-Liang Li;You Zhou;Lang Li
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제27권2호
    • /
    • pp.143-155
    • /
    • 2023
  • Percutaneous coronary intervention and acute coronary syndrome are both closely tied to the frequently occurring complication of coronary microembolization (CME). Resveratrol (RES) has been shown to have a substantial cardioprotective influence in a variety of cardiac diseases, though its function and potential mechanistic involvement in CME are still unclear. The forty Sprague-Dawley rats were divided into four groups randomly: CME, CME + RES (25 mg/kg), CME + RES (50 mg/kg), and sham (10 rats per group). The CME model was developed. Echocardiography, levels of myocardial injury markers in the serum, and histopathology of the myocardium were used to assess the function of the cardiac muscle. For the detection of the signaling of TLR4/MyD88/NF-κB along with the expression of pyroptosis-related molecules, ELISA, qRT-PCR, immunofluorescence, and Western blotting were used, among other techniques. The findings revealed that myocardial injury and pyroptosis occurred in the myocardium following CME, with a decreased function of cardiac, increased levels of serum myocardial injury markers, increased area of microinfarct, as well as a rise in the expression levels of pyroptosis-related molecules. In addition to this, pretreatment with resveratrol reduced the severity of myocardial injury after CME by improving cardiac dysfunction, decreasing serum myocardial injury markers, decreasing microinfarct area, and decreasing cardiomyocyte pyroptosis, primarily by blocking the signaling of TLR4/MyD88/NF-κB and also reducing the NLRP3 inflammasome activation. Resveratrol may be able to alleviate CME-induced myocardial pyroptosis and cardiac dysfunction by impeding the activation of NLRP3 inflammasome and the signaling pathway of TLR4/MyD88/NF-κB.

인 흡착을 위한 Mill Scale 전처리 및 Magnetite 제조 연구 (A Study on the Mill Scale Pretreatment and Magnetite Production for Phosphate Adsorption)

  • 천현철;최영균
    • 대한환경공학회지
    • /
    • 제37권4호
    • /
    • pp.246-252
    • /
    • 2015
  • 철강공장의 열연공정에서 발생하는 폐부산물인 mill scale을 원료로 하여 인흡착에 효율적인 무기흡착제인 magnetite를 생산하고자 하였다. Mill scale의 주요 구성성분은 wustite (FeO), magnetite (FeO), hematite (FeO)였으며, 산처리를 수행할 경우 대부분의 wustite가 magnetite와 hematite로 전환되었다. Mill scale의 산처리는 HCl과 $H_2O_2$를 이용하여, 염기처리는 NaOH 이용하여, 산-염기 복합처리는 $H_2SO_4$와 NaOH를 이용하여 수행하였다. Oil 제거 및 DI water로 rinsing만 한 경우, 인 흡착용량은 0.28 mgP/g으로 나타난 반면, 염기처리를 한 경우 0.68, 산처리를 한 경우 1.19 mgP/g으로 인 흡착용량이 증가하였다. 산-염기 복합처리 과정을 통해 단일상의 magnetite 입자를 얻을 수 있었으며, 이 입자의 인 흡착용량은 3.11 mgP/g 이상인 것으로 파악되었다. 산화철의 인 흡착에 대한 동력학적 특성 분석결과 Freundlich와 Langmuir 두 등온 흡착모델 모두 magnetite의 인 흡착 거동을 잘 모사하였다. Freundlich 모델의 흡착능(K)과 흡착강도(1/n)를 조사한 결과, 온도가 증가할수록 강한 흡착능을 보이는 것으로 나타났다. Langmuir 모델 적용결과 최대 흡착용량은 $20^{\circ}C$에서 5.1 mgP/g인 것으로 파악되었다.

Controlled growth of Carbon Nanotubes using thermal CVD

  • Lee, Tae-Jae;Lyu, Seung-Chul;Choi, Sang-Kyu;Lee, Cheol-Jin;Lee, Jin-Ho
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.674-677
    • /
    • 2002
  • Vertically aligned CNTs were grown on Fe-deposited $SiO_2$ substrates using thermal CVD of acetylene gas. The size of Fe particle is controlled by the flow rate of $NH_3$ and pretreatment time, which leads to control the diameter of CNTs. As the diameter of CNTs decreases, the growth rate is enhanced with an inverse dependence of the CNT diameter. The growth rate of CNTs increases linearly as the growth time increases until 30 min but is rapidly decreased over 40 min. We found an inverse relation between the diameter and growth rate of carbon nanotubes. As the diameter of CNTs increases, the compartment layers of bamboo-shaped CNTs appear more frequently. A base-growth model is suitable to explain the dependence of growth rate and structure of CNTs on the diameter size of catalytic particles.

  • PDF

Selective Concentration and Determination of Phenol and Chlorophenols by Solid Phase Extraction

  • Jung, Min-Woo;Lee, Dai Woon;Paeng, Ki-Jung
    • 분석과학
    • /
    • 제8권4호
    • /
    • pp.535-538
    • /
    • 1995
  • This study employs the variety of mixtures of XAD resin and active carbons as concentration base for solid phase extraction (SPE) which has been widely used to preconcentrate and purify phenol and chlorophenols in determination of environmental water samples. In this study, we employed variety of mixtures of copolymer based XAD-4 resin with active carbons. This cartridges shows advantages of both materials, such as better affinity to phenol by active carbon and better mechanical stabilities from XAD resin. The better enrichment factor, pretreatment time, recoveries and limit of detection (LOD) were achieved by the attempts to pack precolumns with both meterials for preconcentration.

  • PDF

응집 처리한 Alcaligenes eutrophus 균체로부터 poly(3-hydroxybutyrate)의 회수 (Recovery of Poly(3-hydroxybutyrate) from the Coagulated Cells of Alcaligenes eutrophus.)

  • 조경숙;홍은화;류희욱;장용근
    • 한국미생물·생명공학회지
    • /
    • 제26권3호
    • /
    • pp.206-212
    • /
    • 1998
  • 생분해성 고분자인 poly(3-hydroxybutyrate, PHB)를 생산하는 Alcaligenes eutrophus의 배양액에 응집제를 첨가하여 회수한 균체로부터 용매추출법 에 의한 PHB 회수와 순도에 미치는 응집제의 영향을 조사하였다. 응집제는 Al계 3종류와 Fe계 2종류를 사용하였다. 균체로부터 PHB는 30%로 희석한 hypochlorite 용액과 chloloform 혼합용액을 이용하여 추출 회수하였다. Al계 응집제들의 경우, 응집제의 첨가량이 1,000 mg-Al/L 이하의 농도에서는 PHB 회수율이 응집제를 첨가하지 않은 경우의 회수율(82%)과 거의 비슷하였고, 1000 mg-Al/L 이상의 농도에서는 응집제 첨가량이 증가함에 따라 PHB 회수율이 감소하였다. PHB 추출에 사용한 hypochlorite 용액의 농도를 50%로 증가시키면, 응집제를 2000 mg-Al/L까지 높은 농도로 첨가하여도 90% 이상의 PHB 회수율을 얻을 수 있었다. 회수된 PHB의 순도는 응집제의 종류와 용량에 관계없이 98% 이상으로 매우 높았다. Fe계 응집제의 경우, 응집제의 용량은 PHB의 회수율에 거의 영향을 미치지 않았으나, 회수된 PHB중의 잔류 Fe의 농도가 높았고, 잔류 Fe에 의해 정제한 PHB가 엷은 적색으로 착색되었다. 세포의 회수와 PHB의 정제 공정에 적합한 응집제로는 응집효율, 잔류 Al과 Fe 및 정제 PHB의 색상 등을 고려할 때 Fe계 보다는 Al계 응집제가 적합하였다.

  • PDF

Polyester 감량 폐수 중에 존재하는 Ethylene Glycol의 처리(II) -반응속도론- (Treatment of Ethylene Glycol in Polyester Weight Loss Wastewater(II) - Reaction Kinetics-)

  • Han, Myung-Ho;Kim, Jeong-Mog;Huh, Man-Woo
    • 한국염색가공학회지
    • /
    • 제8권6호
    • /
    • pp.27-32
    • /
    • 1996
  • This research is to investigate the reaction kinetics by air-lift bioreactor using calcium hydroxide, the neutralization agent and immobilization media, for removing ethylene glycol remained after chemical pretreatment. It was found that the optimum hydraulic retention time was obtained as 24.2hours at the optimum F/M ratio of 1.32kg-$TCOD_{Mn}$/day.kg-MLVSS, and then, infiuent $TCOD_{Mn}$ and MLVSS concentration were 3,290mg/l and 2,472mg/l, respectively. During the steady state, the kinetics constants such as maximum specific substrate removal rate, half saturation velocity coefficient, yield coefficient and endogenous respiration coefficient were estimated in the base of $TCOD_{Mn}$ as substrate concentration. And they were 1.47day$^{-1}$, 3.95mg/l, 0.391 and 0.092day$^{-1}$, respectively. And also, the oxgen use coefficients for cell synthesis, a', and energy of maintenance, b', were obtained as 0.4kg-O$_{2}$/kg-$TCOD_{Mn}$ and 0.056day$^{-1}$, at the steady state by the experimental result of oxygen uptake rate.

  • PDF

Microwave Assisted Energy Efficient Biodiesel Production from Crude Pongamia pinnata (L.) Oil Using Homogeneous Catalyst

  • Kumar, Ritesh;Sethy, A.K.
    • Journal of Forest and Environmental Science
    • /
    • 제31권1호
    • /
    • pp.1-6
    • /
    • 2015
  • Microwave assisted biodiesel production from crude Pongamia pinnata oil using homogeneous base catalyst (KOH) was unsuccessful because of considerable soap formation. Therefore, a two step process of biodiesel production from high free fatty acid (FFA) oil was investigated. In first step, crude P. pinnata oil was acid catalyzed using $H_2SO_4$ and acid value of oil was reduced to less than 4 mg KOH/g. Effect of sulfuric acid concentration, alcohol-oil molar ratio and microwave irradiation time on acid value of oil was studied. Result suggested that 1.5% $H_2SO_4$ (w/w), 6:1 methanol oil molar ratio and 3 min microwave irradiation time was sufficient to reduce the acid value of oil from 12 and 22 mg KOH/g to 2.9 and 3.9 mg/KOH/g, respectively. Oil obtained after pretreatment was subsequently used for microwave assisted alkali catalyzed transesterification. A higher biodiesel yield (99.0%) was achieved by adopting two step processes. Microwave energy efficiency during alkali catalyzed transesterification was also investigated. The results suggested a significant energy saving because of reduced reaction time under microwave heating.

Prospect on IMO's Performance Standards for Protective Coatings (PSPC) Regulation for Ship's Water Ballast Tanks

  • Baek, Kwang Ki
    • Corrosion Science and Technology
    • /
    • 제7권4호
    • /
    • pp.219-223
    • /
    • 2008
  • In 2006, as a means to minimize early corrosion failure of ships, thus to enhance marine safety, International Maritime Organization (IMO), proposed a mandatory regulation for Performance Standards for the Protective Coatings (PSPC) for ballast tanks of newly built ships to satisfy 15 years of target useful life. In this regulation, several unprecedented strict rules are adopted as minimum, mandatory requirements for protective coatings of ship's water ballast tanks, and all type of ships sailing international sea are subjected to this regulation which is to be effective as early as June of 2008. The PSPC addresses many technical issues in the areas of surface pretreatment (primary and secondary), coating materials, coating application procedure and inspection as well as necessary documentation. The PSPC rules are new and unproven concepts, which calls for rigorous incorporation of reality-based evidences currently available, since there are no practical experiences in terms of the validity of the PSPC rules. There has been much controversy surrounding these regulations and considerable effort has been made by both shipyards and ship owners alike to achieve a performance standard for ballast tank coatings, which is acceptable to all. In this paper, the background and overview of the PSPC rules are given, and several issues in the PSPC are reviewed as a base to achieve robustness of the proposed PSPC, which will serve as a means to minimize early corrosion and to ensure 15 year target useful life of ships.

鹽基相似體를 前處理한 HeLa $S_3$ 細胞에 있어 Bleomycin에 의한 DNA 回復合成 (DNA Repair Synthesis Induced by Bleomycin in HeLa $S_3$ Cells Pretreated with Base Analogs)

  • Um, Kyung-Il;Park, Sang-Dai
    • 한국동물학회지
    • /
    • 제20권1호
    • /
    • pp.41-48
    • /
    • 1977
  • Bleomycin에 의해 유발된 DNA 회복합성은 저농도 처리군에서는 농도의 증가에 따라 증가하며 $5\\mu$g/ml 군에서 조사한 전세포의 15%가 회복합성을 하여 최고율을 보인다. 고농도 처리군에서 DNA 회복합성율이 감소하며 처리 시간을 연장해도 그율은 변화가 없다. BUdR이나 IUdR을 전처리한군에서는 DNA회복합성을 증가시키는 것으로 판명됐으며 또한 고동도 처리군에서는 정상적인 DNA 합성을 억제한다. 시간 변화에 따른 실험에서는 처리한 bleomycin을 제거한후 24시간까지 DNA 회복합성이 계속됐다. 이들 결과는 bleomycin이 excision repair를 유발하는 효과적인 화학물질이 아니며, bleomycin에 의해 유발되는 DNA의 손상은 DNA 나선 절단뿐만 아니라 다른 형태의 DNA 손상도 유발함을 추측할수 있다.

  • PDF