• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.139-148
• /
• 2003

In this study, biodegradable base Li-greases were prepared by using Li-soap thickener and vegetable oils such as soybean oil, rapeseed oil, castor oil and synthetic ester. Also, EP-greases were formulated by blending base Li-greases, anti-wear additives, EP additives, anti-oxidants and corrosion inhibitor etc. And EP-greases were characterized by analysing physical properties such as worked penetration, dropping point, 4-ball wear, extreme pressure, thermal properties etc. Biodegradability of base Li-greases and EP-greases were evaluated by CEC-L-33-A-93 method using several inoculums of domestic sewage treatment plant. As the results, biodegradability of vegetable oils were shown at the range of 97.1 to $98.4\%$. And biodegradability of base Li-greases and EP-greases were $86.2\%\;\~\;89.3\%\;and\;83.4\%\;\~\;90.0\%$ which were lower value than those o( vegetable oils due to effect of Li-soap thickener, respectively. Therefore, the EP-greases prepared in this study were easily biodegraded by microorgnism.

• Tribology and Lubricants
• /
• 제19권5호
• /
• pp.280-284
• /
• 2003

High performance characteristics are required for rolling bearings and the various functions of bearing are greatly influenced by grease. Recently, higher performance is being demanded of rolling bearing greases for bearing lubrication. Four special greases with different composition such as lithium soap/ester oil, urea/ester oil, urea/ether oil and PTFE/fluorine oil were synthesized to compare the performance of these greases with that of the conventional lithium soap/mineral oil grease. The grease properties were investigated using a series of typical grease testing methods and grease life test. After the life test, the greases were charaterized by FTIR analysis and a microscope. And the iron amount in the greases was analyzed by AAS after ashing. The composition and manufacturing process determined the grease performance. The grease with a base oil of synthetic oil showed higher performance and the urea/ester oil and PTFE/fluorine oil showed about three times longer life as compared with conventional lithium grease.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.179-185
• /
• 2001

High performance characteristics are required for rolling bearings and the various functions of bearing are greatly influenced by grease. Recently, higher performance is being demanded of rolling bearing greases for bearing lubrication. Four special greases with different composition such as lithium soap/ester oil, urea/ester oil, urea/ether oil and PTFE/fluorine oil were synthesized to compare the performance of these greases with that of the conventional lithium soap/mineral oil grease. The grease properties were investigated using a series of typical grease testing methods and grease life test. After the life test, the greases were charaterized by FTIR analysis and a microscope. And the iron amount in the greases was analyzed by AAS after ashing. The composition and manufacturing process determined the grease performance. The grease with a base oil of synthetic oil showed higher performance and the urea/ester oil and PTFE/fluorine oil showed about three times longer life as compared with conventional lithium grease.

• Tribology and Lubricants
• /
• 제31권5호
• /
• pp.195-204
• /
• 2015

Several researches are focused on improving the value of fine chemicals based on biomass resources due to environmental and other concerns associated with the use of petroleum-based products. Therefore, the synthesis and application of estolides derived from plant-based waste oil materials and their application as lubricants and as processing oil for butyl rubber products have been studied. Four kinds of estolide were prepared with conversions of 71~92% over 24h using various vegetable oils, as determined by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. FT-IR spectroscopy determines the esterification of estolides using 2-ethylhexyl alcohol. The estolides have iodine values of 35~90, α-ester/α-acid ratios of 0.45~0.55, and total acid number of 114~134 mg KOH g^–1. Four ball wear tests show that the wear scar diameters (WSDs) of estolides as base oil significantly decreased to 0.328~0.494 mm, compared to WSDs of 0.735 and 0.810 mm of WSD for 150N and Yubase 6, respectively, as general base oil. Thus, the estolides have better wear resistance and satisfying design objectives for the engineering of a variety of lubricant base oils.

• KSBB Journal
• /
• 제20권2호
• /
• pp.84-87
• /
• 2005

바이오디젤과 바이오디젤을 기반으로 생산된 neopentyl polyol ester (NPE)계 윤활유 베이스, 디젤유 윤활유와 석유디젤을 분석대상으로 하여 지렁이 (Eisenia fetida)를 이용한 독성 시험을 수행하였다. OECD 207규격에 근거하여 독성을 분석한 결과 바이오디젤과 NPE계 윤활유 베이스의 반수치사농도 $(LC_{50})$ 값은 각각 2,450과 1,528 mg/kg dry weight of soil로서 두 물질은 독성 이 적은 경독성 (slightly toxic) 물질인 것으로 판명되었다. 디젤유 윤활유와 석유디젤의 경우 반수치사농도 $(LC_{50})$ 값이 각각 500과 603 mg/kg로서 중등독성 (moderately toxic) 물질로 판정되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.744-752
• /
• 2007

Recently a fuel oil of the diesel engine in the ship is being changed with low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine like cylinder liner ring groove of piston crown, spindle and seat ring of exhaust valve are increased with using of heavy oil of low quality In particular the degree of wear and corrosion in between valve spindle and seat ring are more serious compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weld to the valve spindle and seat ring is a unique method to prolong the life of the exhaust valve in an economical point of view In this study. corrosion property of both weld metal zone and base metal was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 5% $H_2SO_4$ solution. in the case of being welded with some welding methods and welding materials to the exhaust valve specimen as the base metal. In all cases. the values of hardness of the weld metal zone were more high than that of the base metal. And their corrosion resistance were also superior to the base metal. The weld metal of A2F(AC SMAW: 2 pass welding with foreign electrode) showed a relatively good results to the corrosion resistance as well as the hardness compared to the ether welding methods and welding materials. Moreover it indicated that hardness of the weld metal by the domestic electrode was considerably high compared to that of the foreign electrode.

• 설비공학논문집
• /
• 제29권3호
• /
• pp.127-133
• /
• 2017

Performance analysis has been carried out on a high side scroll compressor that had a fixed scroll equipped with a circular oil groove on its thrust surface. Oil was supplied to the oil groove through an intermittent opening from a high pressure oil reservoir formed inside the orbiting scroll hub. Oil in the groove was then delivered to both suction and back pressure chambers by pressure differentials and viscous pumping action of the orbiting scroll base plate. Mathematical modeling of this oil groove system was incorporated into a main compressor performance simulation program for an optimum oil groove design. The study findings were as follows. Pressure in the oil groove can be controlled by changing its configuration and the oil passage area. With an enlarged oil passage, the pressure in the oil groove heightens due to an increased flow rate, but the pressure elevation in the back pressure chamber is small, resulting in reduced friction loss at the thrust surface between the two scrolls. On the other hand, by increasing the oil passage area, the oil content in the refrigerant flow increases. Considering all these factors, the energy efficiency ratio could be improved by about 3.6% under the ARI condition by an optimal oil groove design.

• 폴리머
• /
• 제27권5호
• /
• pp.464-469
• /
• 2003

실리카의 표면 처리가 마이크로캡슐의 향유 방출 거동에 미치는 영향에 대하여 고찰해 보았다. 표면 산-염기 처리 용액으로서 30 wt%, 20 wt% 그리고 10 wt%의 HCl과 NaOH 용액을 사용하였다. 실리카의 표면 산도 및 표면 염기도를 Boehm의 선택 중화법을 이용하여 측정하였으며 그 흡착 표면적과 총 기공부피는 BET법을 이용한 $N_2$ 기체의 흡착을 통해 알아보았다 액중건조법을 사용하여 향유가 흡착된 실리카를 심물질로 하는 PCL 마이크로캡슐을 제조하였으며, 다공성의 실리카에 향유를 흡착시키기 위하여 초음파를 이용하였다. 제조된 마이크로캡슐의 입도는 광학 현미경을 이용하여 관찰하였으며 FT-IR측정을 통하여 심물질이 함입되었음을 확인하였다. 또한 마이크로캡슐의 향유 방출 거동을 살펴보기 위해 UV/vis. 흡광광도법으로 흡광도를 측정하여 용출된 향유의 양을 정량하였다. 실험 결과, 교반 속도가 증가함에 따라 평균입자 크기가 35 $\mu$m에서 21 $\mu$m로 감소하였으며, 실리카의 산처리를 통해 비표면적이 78.1에서 121.1 m$^2$/g으로 증가함에 따라 향유의 흡착량이 약 20% 증가하고 염기처리를 통해 실리카의 염기도가 78에서 134 meq./g으로 증가하여 향유와 실리카의 산-염기 상호작용의 증가로 인해 향유의 시간에 따른 방출 속도가 감소함을 알 수 있었다.

• 대한화장품학회지
• /
• 제41권3호
• /
• pp.209-218
• /
• 2015

파우더 베이스 메이크업 제품은 피부에 도포되어 8 ~ 12시간 동안 부착되며 피부에서 분비되는 땀이나 피지 등의 분비물에 의해 화장막이 변화된다. 따라서 메이크업 화장의 지속성은 중요한 품질 요소 중 하나이며 평가도 중요하다. 본 연구는 파우더 제품에서 지속성 평가를 위해 여러 가지 방법으로 파우더 반제품의 흡수, 흡유, 발수, 발유 등의 특성을 측정해보고 객관적인 평가 방법과 비교하여 연관성을 확인하여 지속성 평가 시 중요한 파우더의 특성을 살펴보았다. 또한 평가조건(땀과 피지 분비량 차이, 기온 및 습도 등)에 크게 영향을 받지 않으면서 지속성을 예측할 수 있는 간단한 방법을 검토해보았다. 타정 흡유도와 모세관법 및 침지법 등으로 반제품의 흡수, 흡유, 발수, 발유 특성을 측정해본 후 색차계와 ROBO skin analyzer 데이터와 비교하였다. 그 결과 흡수, 발유 특성보다는 흡유와 발수 특성이 지속성과의 연관성이 크다는 것을 확인할 수 있었고 흡유, 발수 특성을 확인하는 것으로 빠르고 손쉽게 지속성에 대한 예측이 가능하리라 생각되었다. 그 중 흡유 특성은 타정 흡유도와 모세관법이, 발수 특성은 침지법이 지속성에 대한 상대평가 방법으로 유용할 것이라고 판단되었다.

• 화약ㆍ발파
• /
• 제9권2호
• /
• pp.13-18
• /
• 1991

It was described Several Tuneling method for applying petrolum oil storage. The most Important factor of Tunneling is not only reinforcing works such as pre-grouting and after grouting but also rock bolting and shotcrete. The efficent works should be done by professional skillman, and also the classification of rock should be decided by professional engineers.