Browse > Article
http://dx.doi.org/10.5916/jkosme.2007.31.6.744

Effect of Welding method and Welding Material to Corrosion Property of Repair Weld Zone for Exhaust Valve in 5% H2SO4 Solution -1  

Kim, Jin-Gyeong (한국해양수산연수원 교육연구처)
Cho, Hwang-Rae (한국해양대학교 공과대학 기계소재공학부)
Lee, Myung-Hoon (한국해양대학교 해사대학 기관시스템공학부)
Kim, Yun-Hae (한국해양대학교 공과대학 기계소재공학부)
Moon, Kyung-Man (한국해양대학교 기계소재공학부)
Abstract
Recently a fuel oil of the diesel engine in the ship is being changed with low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine like cylinder liner ring groove of piston crown, spindle and seat ring of exhaust valve are increased with using of heavy oil of low quality In particular the degree of wear and corrosion in between valve spindle and seat ring are more serious compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weld to the valve spindle and seat ring is a unique method to prolong the life of the exhaust valve in an economical point of view In this study. corrosion property of both weld metal zone and base metal was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 5% $H_2SO_4$ solution. in the case of being welded with some welding methods and welding materials to the exhaust valve specimen as the base metal. In all cases. the values of hardness of the weld metal zone were more high than that of the base metal. And their corrosion resistance were also superior to the base metal. The weld metal of A2F(AC SMAW: 2 pass welding with foreign electrode) showed a relatively good results to the corrosion resistance as well as the hardness compared to the ether welding methods and welding materials. Moreover it indicated that hardness of the weld metal by the domestic electrode was considerably high compared to that of the foreign electrode.
Keywords
Repair weld; Wear; Exhaust valve; Corrosion resistance; Weld metal; Base metal;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 김복인, 노창석, 정교헌, 김민남, '피복성분에 의한 수중용접봉의 아크 안정성 개선에 관한 연구', 한국해양공학회지, 제 15권, 제 4호, pp. 75-79, 2001
2 I. H. Lo, M. C. Lee, K. Y. Lim, W. Ho, G. C. Y. Yang and W. T. Tsai, 'Effect of Heat Treatment on the Pitting Corrosion Behavior of 347SS Weld Overlay', CORROSION SCIENCE AND TECHNOLOGY, Vol. 31, No. 5, pp. 361-367, 2002
3 V. S. Raja, S. K. Vershney, R. Raman and S. D. Kulkarni, 'Influence of Nitrogen on the Pitting Corrosion Behavior of 904L Weld Clad', Corrosion Science, Vol. 40, No. 10, pp. 1609-1625, 1998   DOI   ScienceOn
4 신민교, 기계공작법, 아성출판사, pp. 242-245, 1987
5 J. D. Kim, B. L. Kil and C. J. Lee, 'The Weldability of haminated Stator Core for Motor by Pulsed Nd:YAG Laser[I]', Journal of the Korean Society of Marine Engineering, Vol.30, No. 5, pp. 629-635, 2006   과학기술학회마을
6 S. K. Jang and J. I. Jeon, 'Wedability of Al 7075 Alloy According to Different Tools and Welding Conditions by F.S.W.', Journal of the Korean Society of Marine Engineering, Vol. 30, No. 1, pp. 30-41, 2006   과학기술학회마을
7 김진경, 강명신, 김영식, '선박용 디젤기관의 주철 부품 보수 용접 특성에 관한 연구', 한국해양공학회지, 제 20권, 제 2호, pp. 41-45, 2006   과학기술학회마을
8 J. V. Muylder and M. Pourbaix, 'Atlas of Electrochemical Equilibria in Aqueous Solution', Ed. by M. Pourbaix, Rergomon press and cebelcor, pp. 260-509, 1966
9 P. D. Bilmes, C. L. Liorente, Saire Huaman, L. M. Gassa and C. A. Gervasi, 'Microstructure and Pitting Corrosion of 13CrNiMo Weld Metal', Corrosion Science, Vol. 48, pp. 3261-3270, 2006   DOI   ScienceOn
10 D. A. Jones, 'Principles and Prevention of Corrosion', Original American Edition Published by Prentice-Hall, Inc., pp. 314, 1998
11 L. W. Tsay, W. L. Lin, S. W. Chenct and G. S. Leu, 'Hydrogen Sulphide Stress Corrosion Cracking of 2.25 Cr-Mo Steel Weldments', Corrosion Science, Vol. 39, No. 7, pp. 1165-1176, 1997   DOI   ScienceOn
12 김민남, 김복인, 한정동, '습식수중 용접봉의 기계적 성질에 관한 연구', 한국해양공학회지, 제 14권, 제 4호, pp. 56-61, 2000
13 J. D. Kim, S. J. Yoo and J. S. Kim, 'Optimization of Pulsed Nd:YAG Laser Welding Conditions for Sealing of Lithium-ion Battery', Journal of the Korean Society of Marine Engineering, Vol. 30, No. 5, pp. 623-628, 2006   과학기술학회마을
14 안석환, 정정환, 남기우, '용접 열사이클 재현 에 의한 SS400강 및 STS304강의 특성평가', 한국해양공학회지, 제19권, 제4호, pp. 64-71, 2005   과학기술학회마을
15 전대희, 부식과 방식의 관리, 일중사, pp. 426-428, 1985
16 전대희, 부식과 방식의 관리, 일중사, pp. 294-298, 1985
17 오종인, 김영표, 박호경, 방한서, '선체구조용 A급 강재의 하이브리드 용접에 대한 열 및 역 학적 특성에 관한 연구', 한국해양공학회지, 제 21권, 제 1호, pp. 64-68, 2007   과학기술학회마을
18 Y. H. Lee, Y. H. Kim and H. Kim, 'Crevice Corrosion Resistance of Stainless Steel in Natural Sea Water with Different Post Welding Treatment', CORROSION SCIENCE AND TECHNOLOGY, Vol. 2, No. 5, pp. 219-224, 2003
19 K. M. Moon, M. H. Lee, K. J. Kim, J. G. Kim and S. J. Kim, 'A Study on the Post-Weld Heat Treatment Effect to Mechanical Properties and Hydrogen Embrittlement for Heating Affected Zone of a RE36 Steel', CORROSION SCIENCE AND TECHNOLOGY, Vol. 2, No. 6, pp. 283-288, 2003