• Elastomers and Composites
• /
• 제1권1호
• /
• pp.49-55
• /
• 1966

Based upon the results of the previous work, the experiments are concentrated on the improvement of the durability of rubber coated fabrics as a rain garment material. To obtain a much lighter and durable coated fabric, several kinds of light weight cotton prints having almost equal density in warp and fillingwise were chosen. Rubber coating on these prints was made by topping and spreading process using rubber compound of various viscosity, and the physical properties of final product were analysed and interpreted in terms of adhesion and durability. The results are as follows. 1. Any noticeable difference between two coating processes was not found in terms of physical properties. 2. Base fabrics should be dipped once into a dilute rubber compound before coating operation in order to obtain a uniform adhesion and physical properties, and the optimum range of the viscosity of dipping paste are from 100 poise to 200 poise. 3. Generally, the tearing strength of the coated fabrics is inversely proportional to the adhesion. 4. It was assumed that the increase of the water proofness after water immersion on the finished material which have dense base fabric is chiefly due to the swelling of the cellulosic fiber.

• 감성과학
• /
• 제18권4호
• /
• pp.25-34
• /
• 2015

본 연구에서는 전도성 직물을 기반으로 동작 센서로 구현하여 팔의 굽힘, 폄 동작에 따른 센서의 전기저항의 변화를 측정, 분석함으로써 관절 동작을 효과적으로 측정 할 수 있는 직물 센서의 요건을 탐색하였다. 이를 위해 두 가지 편직물인 'L'직물과 'W'직물 양면에 Single Wall Carbon Nano-Tube(SWCNT) 코팅을 한 후 이를 다양한 형태로 후가공하여 직물 센서를 개발하고 암 밴드에 부착하였다. 직물 센서는 코팅용 바탕 직물의 종류(2가지), 센서의 부착 방법(2가지), 센서의 layer 수(2가지), 센서의 길이(3가지), 센서의 너비(2가지)의 총 48개로 구성되었다. Con-Trex MJ에 48개의 암 밴드를 입힌 인체 모형 팔을 대상으로 직물 동작 센서의 성능을 평가하였다. 인체 모형 팔에 입혀진 총 48개의 암 밴드 각각에 대해서 frequency: 0.5Hz, ROM: $20^{\circ}{\sim}120^{\circ}$ 에서 굽힘과 폄 동작을 반복하도록 조정하였고, 48개 각 사례 당 세 세트(set)씩 반복 측정한 전압값을 기록하였다. 전압값을 peak-to-peak voltage(Vp-p)의 base line의 균일성, 동일 세트 내 Vp-p의 균일성, 세 세트 간의 Vp-p의 균일성을 기준으로 평가하고 분석한 결과, SWCNT 코팅된 'L' 직물을 두 겹으로 구성하여 열고정 방식으로 부착한 $50{\times}5mm$, $50{\times}10mm$, $100{\times}10mm$ 크기의 직물 센서와, SWCNT 코팅된 'W' 직물을 두 겹으로 구성하고 열고정 방식으로 부착한 $50{\times}10mm$ 크기의 직물 센서가 전체 변화율 5%이내의 가장 균일하고 안정적인 신호값을 나타내었다. 이상의 연구 결과를 통해 SWCNT 코팅 소재를 다양한 형태로 가공해 직물 센서로 구현했을 때 인체의 사지 동작을 측정할 수 있는 센서로서 적합함을 확인하였고, 최적의 센서 형태를 규명하였다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제38차 학술발표대회
• /
• pp.43-45
• /
• 2008

Fabrics shrinkage are affected by weaving conditions and are very difficult to be estimated when the amount of fiber consumption and production are calculated. Therefore, we need to standardize fabric shrinkage according to various weaving conditions. To develop the new textile products, we collected and analysed data of fabric shrinkage with the weaving conditions including twisting and covering process and denier of yarns used.

• 대한안전경영과학회지
• /
• 제17권1호
• /
• pp.139-148
• /
• 2015

For design research of teenagers' posture correcting shirt, postures of teenagers were analyzed and became the base of inventing suitable patterns. The subjects of this study were 198 of both female and male middle school students from the city of Seoul. Students' postures in classroom and length change of body surface were observed and analyzed; based on this, total of 5 postures was selected, and length changes of body surface were applied. The patterns in this study were designed with stretch material to help antagonism by muscle movements. Each fabric that was used in this study had 110% of stretch, 120~140% of stretch, and 150~170% of stretch. Both of one-way-fabric and duplex-fabric were used in this study, depending on application site.

• 패션비즈니스
• /
• 제9권4호
• /
• pp.170-177
• /
• 2005

Velvet fabric has soft touch, subtle luster, and good draping property. Threedimensional simulated models of cylindrical monofilaments constituting the velvet fabric were prepared. Image analysis techniques were used to measure the reflected light from the surface of velvet fabrics and the simulated images of the pile fibers. As the angle of incidence increased, the reflectance from the velvet surface became lower. Most of the reflection came from the tips of the cut piles. Crushed velvet type also was modeled using slant cylinder models on top of a base plate.

• 한국의류학회지
• /
• 제16권2호
• /
• pp.255-262
• /
• 1992

A computer simulation methiod for costume design has been developed using LUMENA, a generic-purpose 2-dimensional graphic software. In this study the palette, tone chart, fabric chart, styling chart, and costume drawing were constructed on the computer. In costume design simulation, fabric swatches with various colors and patterns were applied to the base garment image taken by using a scanner or a video camera. In this procedure the original 3-dimensional effect was fully retained. Using this simulation method, a number of costume designs could be carried out in short time without actually making the garment. A portfolio including the tone chart, fabric chart, styling chart, costume drawing, and simulation results were made for the purpose of demonstration, using the animation tools of LUMENA.

• Elastomers and Composites
• /
• 제2권1호
• /
• pp.31-36
• /
• 1967

As a series of the studies of thin rubber coated fabrics, the experiments were concentrated on the investigation of the physical properties of the surface and back coated fabrics with natural and synthetic rubber. Cotton poplin and nine other cotton shootings were used as a base fabric and both sides of fabric, face and back, were coated by means of topping or spreading process. The physical properties of finished material were broadly investigated especially in view of the quality requirements of the poncho.

• 감성과학
• /
• 제11권4호
• /
• pp.449-460
• /
• 2008

중동지역은 PET 합섬직물이 이들의 평상복으로 많이 사용되고 있으며, 여성복은 차도르(Chador) 그리고 남성복은 토베(Thobe)라고 불려진다. 그리고 이들 PET 직물은 미세한 촉감특성에 따라서 수출가격의 큰 차이를 가져오며 원사의 특성과 제조공정 특성에 의해 미세한 감성촉감의 차이를 유발한다. 본 연구에서는 고가에 팔리고 있는 일본 데이진 제품과 비교하여 본 연구에서 개발된 중동 남성복 Thobe 제품의 감성특성을 분석하고 미세한 감성촉감의 원인을 규명하여 원사 및 최적 생산공정조건에 관한 연구를 수행하였다. 본 연구에서는 일본 데이진 직물 4가지를 목표품질시료로서 준비하였고, 개발을 위한 시생산제품으로 5가지 직물을 시생산하였다. 실의 굵기, 꼬임수 그리고 실의 세팅조건 및 직물의 밀도 등을 바꾸어 연축과 직축 그리고 가공축 등의 설계조건을 바꾸어 주었다. 본 연구수행의 결과 데이진 Thobe 제품의 감성특성을 원사 및 직물에서 분석하고 이들 감성특성 분석 자료를 바탕으로 사가공(絲加工)기술과 3차원 직물설계 시뮬레이션 기술을 바탕으로 감성 토베 직물의 설계기술을 확립하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.687-701
• /
• 2020

In the production of industrial fabric, it needs automatic real-time system to detect defects on the fabric for assuring the defect-free products flow to the market. At present, many visual-based methods are designed for detecting the fabric defects, but they usually lead to high false alarm. Base on this reason, we propose a Sobel operator combined with patch statistics (SOPS) algorithm for defects detection. First, we describe the defect detection model. mean filter is applied to preprocess the acquired image. Then, Sobel operator (SO) is applied to deal with the defect image, and we can get a coarse binary image. Finally, the binary image can be divided into many patches. For a given patch, a threshold is used to decide whether the patch is defect-free or not. Finally, a new image will be reconstructed, and we did a loop for the reconstructed image to suppress defects noise. Experiments show that the proposed SOPS algorithm is effective.

• 한국지역사회생활과학회지
• /
• 제27권2호
• /
• pp.295-304
• /
• 2016

This study was conducted to evaluate and compare the waterproofness and water vapor transport properties of 30 waterproof and breathable textiles in the market. MVTR upright cup test with water, MVTR inverted cup test with potassium acetate, and sweating hot plate test method were used for measuring the breathability of fabric samples. The waterproofness of all fabric samples and evaporative resistance of garment ensembles made with 5 selected waterproof and breathable textiles out of 30 samples were tested. The results of this study were as follows. The base fabrics of the most samples were basic weave structure with either polyester or nylon fiber. The waterproofness was over $5000mmH_2O$ for all the samples except densely woven fabrics. The evaporative resistance of garments that were made out of 5 fabric samples with a range of low to high breathability ranged $39.9{\sim}56.7m^2{\cdot}P{\cdot}W^{-1}$. The data of the water vapor transport properties of fabric samples varied with different test methods. Overall the bicomponent film fabrics showed better breathability and less standard deviation regardless of test methods. It is expected the breathability data without the information of test conditions used for marketing would confuse the consumers and the apparel manufacturers.