• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.198-201
• /
• 2012

This is a study about a platform realization measuring the extent of reaction in nerve, as giving a electrical impulse on a nerve pulp regulating a function of muscle, about a measurement of nerve reaction in the amount of current, the lasting time of current, and the position of electrode from a electrical impuls. The position of an electrode in a electrical nerve impuls have nothing to do with all nerves from exercise to all things. There is the Single Twitch Stimulation, Train-of-four, and Double Burst Stimulation in the form of nerve stimulation. This report is needed for selecting MCU of low electric power for a base in embedded system and measuring the extent of reaction after making a sensor interface to know sensitivity of measuring sensor in basic reaction of nerve impuls. The platform is realized to select a high efficiency AD Convertor for raising accuracy in measured data. As the platform in this report was developed for a medical appliances, it was designed to consider user safety in electric power Isolation when making electric power circuit.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.472-478
• /
• 2003

In this paper, a near zero If mixer was designed in cascode structure by using two single-gate FETs. Since it is driven by the second order harmonic of LO signal, a sub-harmonic cascode FET mixer has good LO-RF port isolation characteristic. In order to solve DC offset of a homodyne system, near zero If is used instead of zero If and the mixer is driven by sub-harmonic of LO signal. As RF input power was -30 dBm and LO power was 6 dBm, the designed mixer had 6.7 dB conversion gain, 8.4 dB noise figure, 31.5 dB LO-RF port isolation, -1.9 dBm lIP3 and -2.8 dBm IIP2.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.505-513
• /
• 2000

This study suggests new antenna design for polarization diversity. For dual polarization, two port feeding lines are printed on two separate layers and cross-shaped aperture is located on ground between the substrates. For reducing back radiation, a reflector is attached around $\lambda$/4 behind feeding substrates. For wide bandwidth we use a perturbed patch with saw tooth shaped. This perturbation effect causes reduction of antenna size and also reduction of array size. With the antenna proposed here, $1\times4$ array dual polarization antenna for polarization diversity of PCS base station is built. One single element has as large as 10.3%, 11.3% bandwidths at each port, V.S.W.R less than 1.3 and the isolation is less than -40 dB, also array antenna has 13.2% 12.7% band bandwidth, V.S.W.R less than 1.3 the isolation below -36dB and the XPD of 10 dB.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.95-102
• /
• 2017

The friction pendulum system(FPS) is a kind of seismic isolation devices for isolating structures from an earthquake. To analyze the effect of friction materials used in the friction pendulum system, fragility analysis of LNG tank with seismic isolation system was conducted. In this study, titanium dioxide($TiO_2$) nanoparticles were incorporated into polyvinylidene fluoride(PVDF) matrix to produce friction materials attached to the FPS. The base moment of the concrete outer tank and the acceleration of the structure were evaluated from different mixing ratios of constituents for the friction materials. The seismic fragility curves were developed based on two types of limit state. It is confirmed that evaluation of combined fragility curves with several limit states can be applied to select the optimum friction material satisfying the required performance of the FPS for various infrastructure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.331-334
• /
• 2011

This is a study about a platform realization measuring the extent of reaction in nerve, as giving a electrical impulse on a nerve pulp regulating a function of muscle, about a measurement of nerve reaction in the amount of current, the lasting time of current, and the position of electrode from a electrical impuls.The position of an electrode in a electrical nerve impuls have nothing to do with all nerves from exercise to all things. There is the Single Twitch Stimulation(STS), Train-of-four(TOF), and Double Burst Stimulation(DBS) in the form of nerve stimulation. This report is needed for selecting MCU of low electric power for a base in embedded system and measuring the extent of reaction after making a sensor interface to know sensitivity of measuring sensor in basic reaction of nerve impuls. The platform is realized to select a high efficiency AD Convertor for raising accuracy in measured data. As the platform in this report was developed for a medical appliances, it was designed to consider user safety in electric power Isolation when making electric power circuit.

• Structural Engineering and Mechanics
• /
• v.91 no.5
• /
• pp.469-486
• /
• 2024

Electric transformers are major components of electrical systems, and damage to them caused by earthquakes can result in significant financial loss. The current study modeled a three-dimensional (3D) isolated electrical transformer under horizontal and vertical records from different earthquakes. Instead of using fixed coefficients, an improved wavelet method has been used to create the greatest compatibility between the response spectra and the target spectrum. This method has primarily been used for dynamic analysis of isolated structures with spring-damper devices because it has shown greater accuracy in predicting the response of such structures. The effect of the nonlinear soil-structure interaction on the probability of transformer failure also has been investigated. Soil and structure interaction modeling was carried out using a beam on a nonlinear Winkler foundation. The effect of the nonlinear soil-structure interaction during dynamic analysis of transformers revealed that the greatest increase in the probability of transformer failure was in the fixed-base condition when the structure was located on soft soil. This intensified the response of the structure and increased the probability of transformer failure by up to 27% for far-field and up to 95% for near-field ground motions. A comparison of the results indicates that the use of 3D isolation systems in transformers in areas with soft clay that are subject to near-field ground motions can strongly reduce the probability of failure and improve the seismic performance of the transformer.

• Journal of Environmental Health Sciences
• /
• v.29 no.2
• /
• pp.50-55
• /
• 2003

3,3-dichlorobenzidine is suspected to be cancinogenic in experimental animal and human. Several studies have investigated excretion of metabolites in urine, hemoglobin adduction and cancer incidence among workers occupationally exposed to 3,3'-dichlorobenzidine. In these researches, metabolites of 3,3'-dichlorobenzidine had a very important role, and were required as highly purity. The purpose of this study was synthesis and isolation of its metabolites from 3,3'-dichlorobenzidine. 3,3'-dichlorobenzidine was partially dissolved in benzene, ether, ethanol and methanol, and completely dissolved in 70% acetic acid on mixtures of citric acid containing less than 1% DCB, pyridine, a mixture of 0.5N NaOH and toluene(1:2), and phenol saturated with 20 mM TRIZA base. DCB, monoacetyl-DCB and diacetyl-DCB were measured by using gas chromatography/mass spectrometry(GC/MS). Detection for checking them was nitrogen phosphorous detection mode(NPD), and for identifying them was selected ion monitoring mode(SIM). The base peaks were 252 m/z in DCB, 252, and 294 m/z in monoacetyl-DCB, and 252, 294 and 336 m/z in diacetyl-DCB, respectively. Diacetyl-DCB was synthesized by titrating DCB solution of pyridine with sufficient acetyl chloride. Precipitation was diacetyl-DCB, which was purity of 98.7%. And its supernatant was composed of DCB, monoacetyl-DCB and diacetyl-DCB. By using acetic acid as controller of acetylation, monoacetyl-DCB was isolated from diacetyl-DCB . And residual pyridine was removed by using acetone. The purity of monoacetyl-DCB was 98.8%.

• Microbiology and Biotechnology Letters
• /
• v.33 no.2
• /
• pp.123-129
• /
• 2005

Isolation and identification of pathogens from slaughter and meat processing plant were investigated. Antimicrobial activity of Amaranthus lividus against isolated pathogens such as Aeromonas sobria, Escherichia coli, Escherichia coli O157, Listeria monocytogenes, Salmonella spp., and Staphylococcus aureus was investigated. Among the chloroform, ethyl acetate and buthanol fraction of amaranthus lividus showed inhibitory effect against Aeromonas sobria CLFM1 and Escherichia coli CLFM2. Antimicrobial substance in chloroform fraction was isolated by silica gel adsorption column chromatography, sephadex LH-20 column chromatography and silica gel partition column chromatography. The antimicrobial compound of amaranthus lividus was identified as diethyl phtalate by HPLC, GC-MS, H-NMR and C-NMR.

• Korean Journal of Veterinary Service
• /
• v.28 no.1
• /
• pp.1-21
• /
• 2005

Pullorum disease and Fowl typhoid are kind of poultry specific disease for poultry. The peculiar character of these poultry specific diseases is that it can be infected by transmitting vertically and horizontally, also it is hard to be discovered by clinical sign, and pathology or immunology. So, to develop the PCR method which distinguishes these two genetically similar diseases of separated the specific DNA fragment from each strain and use it for differential diagnosis by subtraction PCR method. Standard strain of S gallinarum and S pullorum, and field isolation strain were verified by biochemistry, It confirmed existence of plasmid by using the PFGE. Then, Isolated DNA from it and used it as materials for the experiment. After cutting genomic DNA of two strains by using Sau 3Al, It ligated primer to tester DNA for PCR amplification and separated specific DNA fragment bacteria with method of subtraction PCR. And, It confirmed that it is a piece of unique DNA in every bacteria using base sequence of separated DNA fragment. 1. The six specific DNA fragment were separated from the DNA of S gallinarum and S pullorum by the subtraction PCR method. 2. In the result of comparison after setting base sequence of each fragment, each separated base sequence of DNA fragment they did not correspond to each other 3. As the result of each DNA fragment is derived from the each strain of DNA, and there was no homology of genomic DNA level in mutual. 4. The fragment originated in plasmid and includes S pullorum did not separate. 5. In the result of searching base sequence in Genebank, it partially shows homology in Salmonella enterica, S typhimurium, S dublin, Escherichia coli, Shigella flexneri, Yersinia pestis, Klebsiella pneumoniae. 6. Primer design by S gallinarum DNA 2, 3 fragment used PCR, They are positive reaction in only S gallinarum at 276, 367 bp position.

• The Plant Pathology Journal
• /
• v.17 no.5
• /
• pp.257-263
• /
• 2001

Species of the genus Orobanche are parasitic flowering plants, holoparasites, which cling to the roots of green plants. Their tiny seeds (200 x $250\mu\textrm{m}$) germinate in response to chemical stimuli produced by host and some non-host plants. Successful contact with their host leads to development of haustoria for obtaining water and food. The shoots above the ground expose flowers and disseminate seeds. Several samples of Orobanche ramosa, O. crenata, O. cernua, and O. egyptiaca were collected from different localities in Jordan. These samples showed one of the following disease symptoms: dry rot at the base of the stem; general deterioration and expanded lesion from base upward; soft tissue maceration of stem; and black rot of flower parts with incomplete maturation of the ovary and seeds. Isolation from diseased stems and seeds was made on three different mycological media. Several fungi were isolated, mainly, Fusarium spp., Alternaria alternata, Rhizoctonia sp., Dendrophora sp., Chaetomium sp., and an ascomycetus fungus with a perithecium. Pathogenicity tests showed that Fusarium spp. and Alternaria alternata attacked healthy living tissue of Orobanche spikes. These fungi caused lesions of black soft rot and complete deterioration within 5-7 days. They also attacked Orobanche seeds, arresting their germination and causing maceration of non-germinated and germinated seeds after 5-7 days of incubation. Meanwhile, Dendrophora sp. and Chaetomium sp. caused limited lesion at first, but were able to colonize the tissue as it aged and senesced. This study showed the presence of a potential endogenous pathogenic fungi in Jordan, which can be investigated as a biological control for Orobanche.