• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.69-72
• /
• 2005

As life style becomes to be complicated, lots of support technologies were developed. The bar code technology is one of them. It was renovating approach to goods industry. However, data storage ability in one dimension bar code came in limit because of industry growth. Two-dimension bar code was proposed to overcome one-dimension bar code. PDF417 bar code most commonly used in standard two-dimension bar codes is well defined at data decoding and error correction area. More works could be done in bar code image acquisition process. Applying various image enhancement algorithms, the recognition rate of PDF417 bar code is improved.

• Archives of Pharmacal Research
• /
• 제20권4호
• /
• pp.330-337
• /
• 1997

Thiocarboxamidocinnamonitrile derivatives 2 under bar a-f reacted with 3-aminopyrazole derivative 3 under bar a-c to give the pyrazole[3, 2-b]pyrimidine derivatives 6 under bar a-p. Compounds 6 under bar a-p were used as starting material for syntheses of several heterocylic coompounds. Dehydrogenation of 6 under bar gave pyrazole[3, 2-b]pyrimidines 10 under bar a-d while its reaction with diethyl oxalate gave 11 under bar. Reactions of 6 under bar with formic acid gave pyrazolopyrimidines 17 under bar a-j, and pyrazolopyrimidopyrimidines 18 under bar a-j.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.88-98
• /
• 1998

In many automatization applications, a rigid body is required to go forward and backward repeatedly through a set of given position/orientations precisely while a crank is rotated. Such a motion can be generated by 6 bar mechanism adding a dyad to a 4 bar mechanism. If this is the case for 3 position synthesis of the 4 bar mechanism, the feasible solution area for designing the 4 bar mechanism will be limited over the general solution area. This paper proposes a procedure to synthesize 4 bar mechanism to be used to generate the required motion. It is found that the only input crank of the 4 bar mechanism should be limited to satisfy the condition. And the feasible design area for the circle point/ center point of the input crank is identified so that design of the undesired mechanism could be avoided. The method is tested and the results are shown.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.669-675
• /
• 1997

This paper investigates the performances of GFRP bar and its possibility for using a substitute of steel bar. GFRO bar was made with introducing the glass fiber into GTR added UPE. We carried out the tensile test of GFRP and steel bar and out the three point bend test bond-test and fracture energy measurement on the GFRP bar and steel bar reinforced concrete. The GFRP bar was excellent as comparison with steel bar in the contribution to the energy absorption and the ductility of concrete. But its tensile, bond and bend strengthes were comparatively small. In order to improve these defects, we judged that glass fibers in GFRP bar must be completely adhesive one another by the impregnating glass fibers into UPE.

• 한국수자원학회논문집
• /
• 제52권spc2호
• /
• pp.801-810
• /
• 2019

본 연구에서는 실내실험을 통해 하천횡단 수리구조물인 보에 의하여 상류에서 형성된 사주가 하류 지형변화에 미치는 영향을 분석하였다. 통수초기 수로의 유입구에서 흐름 교란에 의하여 강제효과가 발생하면서 상류에서부터 교호사주가 발달하고 일정한 형상을 유지한 상태로 하류로 이동하였다. 상류에서 발생한 사주가 보를 통과하는 순간, 보 하류에 세굴되었던 하상은 퇴적이 진행되고 사주의 위상이 변화되었다. 우안에서 발달한 세굴심은 하류로 이동하지만, 사주의 위상이 변화되면서 좌안으로 이동하였다. 상류에서 발생되는 교호사주의 형태가 뚜렷할수록 하류에서 발생한 교호사주의 위상변화는 빠르게 진행되었다. 또한 강제효과가 클수록, 상류에서 교호사주의 형태는 뚜렷하게 나타났다. 사주의 위상이 바뀌면서 하류의 사주는 이동속도가 점차 감소하여 이동이 정지되는 것으로 나타났다. 교호사주의 발달이 빠를수록 하류에서 형성된 사주의 파고는 크고 파장은 짧았다. 이것은 사주의 강제효과가 클수록 사주의 이동에 영향을 주는 것을 의미한다. 또한, 시간이 증가하면서 교호사주의 크기는 증가하지만 하류로 이동하지 않고 정지되어 고정사주가 형성되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.117-122
• /
• 2001

Recently, epoxy-coated re-bar used to the structure partly and put to practical use step, but not economical and appeared to the defect of deterioration of long term bond strength between concrete. The method for complement the defect of epoxy coated re-bar, study of polymer cement slurry coated re-bar started and basic properties appeared to excellent, but study of bond properties embedded in concrete specimens insufficient until now. This study attempts to examination of using possibility for bond strength of polymer cement slurry coated re-bar between concrete specimens compare to ACI Code and KS Code through pull-out test of 15cm$\times$15cm$\times$15cm specimens with polymer cement slurry coated re-bar as polymer cement ratio 50%, 100%, 150%, coating thickness 250${\mu}{\textrm}{m}$, 440${\mu}{\textrm}{m}$ and curing age. In the results of this study, the bond strength of polymer cement slurry coated re-bar compare to plain re-bar, epoxy coated re-bar decreased St/BA-modified polymer cement slurry coated re-bar, but bond strength of PA-modified polymer cement slurry coated re-bar appeared to excellent results. The bond properties of polymer cement slurry coated re-bar between concrete will be obtain more precise results according to compressive strength change of concrete and re-bar diameter size.

• 천문학회보
• /
• 제42권2호
• /
• pp.44.1-44.1
• /
• 2017

In barred galaxies, gaseous structures such a nuclear ring and dust lanes are formed by a non-axisymmetric stellar bar potential, and the evolution of the stellar bar is influenced by mass inflows to the center and central star formation. To study how the presence of the gas affects the evolution of the stellar bar, we use the mesh-free hydrodynamics code GIZMO and run fully self-consistent three-dimensional simulations. To explore the evolution with differing initial conditions, we vary the fraction of the gas and stability of initial disks. In cases when the initial disk is stable with Q=1.2, the bar strength in the model with 5% gas is weaker than that in the gas-free model, while the bar with 10% gas does not form a bar. This suggests that the gaseous component is unfavorable to the bar formation dynamically. On the other hand, in models with relatively unstable disk with Q=1.0, the presence of gas helps form a bar: the bar forms more rapidly and strongly as the gas fraction increases. This is because the unable disks form stars vigorously, which in turn cools down the stellar disk by adding newly-created stars with low velocity dispersion. However, the central mass concentration also quickly increases as the bar grows in these unstable models, resulting in fast bar dissolution in gas rich models. We will discuss our results in comparison with previous work.

• 도시과학
• /
• 제7권2호
• /
• pp.21-27
• /
• 2018

With the increase of the skyscraper center, the development of large-diameter and high-strength reinforcing bars is being carried out to solve the dense reinforcement. In case of the steel reinforced concrete with a small cross section such as beam-column joints, the development length becomes short when straight bars are used. Therefore, it is possible to solve the problem that the development length becomes short by using the bearing strength of the hooked bar and headed bar. In this study, the exterior beam-column joint test of SD700 hooked bar and headed bar with anchorage length of 20db was conducted to extend the development length limitation of hooked bar and headed bar. As a result of the evaluation of the anchorage strength using the design equation by KCI, the average of the [measured value]/[predicted value] ratio was 1.31 for the hooked reinforcing bars. In the case of headed bars, the average of the [measured value]/[predicted value] ratio was 1.12. In addition, in order to compare the anchorage performance of the hooked bar and the headed bar, the measured values were divided by the square root of the compressive strength of the concrete to compare the anchorage strength. Under the same conditions, the anchorage strength of headed bars was 8.5% higher than the hooked bars.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.143-148
• /
• 2001

Volumetric error measurement and calibration of a coordinate measuring machine are studied by using a Ball-Bar artifact. Examples of the Ball-Bar design are shown using inbar materials and precision steel balls. Also, for the uncertainty error using the Ball-Bar is discussed. Method of Ball-Bar artifact and the analysis of the error vectors are proposed. Using the Ball-Bar data, we studied the method of volumetric errors ana]ysis of a coordinate measuring machine.

• 한방재활의학과학회지
• /
• 제24권3호
• /
• pp.29-37
• /
• 2014

Objectives Osteoporosis is an impending problem in the rapidly aging society. The purpose of this study is to identify the effects of Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) on osteoporosis induced by ovariectomy in rats. Methods 24 rats were randomly assigned to a SHAM group, a control group, and a Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group (n=8). Ovaries were extracted and for 8 weeks, the rats were given dry feeds and Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group were given a mixture of dry feeds and Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$). At 8 weeks, their body weight, femur mass, tibia ash per body ratio, overall surface area and thickness of the trabeculae, overall surface area of the osteoblasts, and the number of osteoclasts were measured and levels of albumin, aspartate transaminase (AST), alanine transaminase (ALT), alkaline phosphatase (ALP), total-cholesterol, calcium and estradiol were recorded. Results There was no significant difference in the weight of the femur and the tibia ash per body ratio. The Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group had significantly thicker trabeculae than the control group and showed a minimal increase of overall surface area of the trabeculae. The overall surface area of the osteoblasts and the number of osteoclasts decreased in the Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group. There were no statistically significant differences in AST, ALT, ALP, total cholesterol, phosphorus, and estradiol levels. On the contrary the Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group had significantly higher levels of Albumin, triglyceride, and calcium. Conclusions It can be concluded that oral intake of Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) prevents the thinning process of the trabeculae. Thus, it may have positive effects on the treatment and prevention of osteoporosis in postmenopausal women.