• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.2 s.30
• /
• pp.109-116
• /
• 1989

Korean clothings are admired for their beauty and traditional value. On the other hand, many of Korean women complain of chest restriction. Korean skirts may give high garment pressure to the wearers because the Korean skirt-band do not resolve physical tensions in size or in stretch. This paper aims at the identification of the garment pressure caused by the Korean skirt-band and the cardiopulmonary change caused by garment pressure. The Korean skirt-band were made in 3 kinds of size, and 21 women were selected for wearing test. The garment pressure was measured in front, side, and back parts of the body. The measured cardiopulmonary parameters were vital capacity, respiratory rate, heart rate, and blood pressure. The results were as follows: 1. The smaller the size of the Korean skirt-band, the greater the garment pressure. The pressure during inspiration was significantly greater than the pressure during expiration. 2. The pressure in side part was the greatest of the three measurements and the pressure in back part was the smallest. 3. The small size of the Korean skirt-band revealed low vital capcity and great respiratory rate. 4. As the small size grement was dressed, the respiratory rate and the heart rate during walking and rest after walking were significantly high. 5. Subjects felt uncomfortable when they wore small sized garment.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.175-178
• /
• 2003

Mechanical behavior of a fuel stack was studied by the orthotropic material model. The fuel stack is mainly composed of bipolar plate (BP), gasket, end plate, membrane electrolyte assembly (MEA), and gas diffusion layer (GDL). Each component is fastened with a suitable pressure. It is very important to maintain a suitable contact pressure of BP, because it affects the efficiency of the fuel cell. This study compared mechanical behavior of various fastening types of the fuel cell stack. Bar, band, and modified band fastening type are used. The band fastening type showed that it reduces total volume of the cell, but it does not improve the contact pressure distribution of each BP. The modified band fastening type was designed by considering the deformations of band fastening type, and it showed a good enhancement of contact pressure distribution.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.67-74
• /
• 2019

This study aims to investigate the relation between pressure, 3D length change, and subjective pressure sensation in sports brassieres. Seven Korean women in their 20s and 30s were chosen as subjects. In the experiment, the subjects evaluated four types of sports brassieres wherein the lower band was changed. The results of the study were as follows. The pressure according to the measurement position was lower at the front part than at the side and back parts (p<.05), and there was no difference in the pressure according to the brassiere type. It was observed that brassiere C, which had the higher extension band, was elongated more than the other brassieres when worn. In the case of brassiere B, which had a slit in the front center, it was observed that the 3D length of the front part changed very little as the slit spreads, and the back part stretched in a manner similar to those of the other brassieres. Subjective pressure sensation was statistically different only at the front and the side of the lower band. Brassiere B(with a silt) demonstrated the least subjective pressure sensation; the pressure sensation was high when wearing brassieres A and D (p<.05). Brassieres B and C were also preferred for overall comfort. In conclusion, it was observed that the substitution of material and morphological transformation affect subjective sensation.

• PNF and Movement
• /
• v.17 no.3
• /
• pp.421-429
• /
• 2019

Purpose: This study evaluated the relationship between pelvic pressure and irradiation of the proprioceptive neuromuscular facilitation (PNF) upper arm pattern exercises with an elastic band while in a sitting position. Methods: Fourteen subjects with asymptomatic pelvic pressure participated in this study. Pelvic pressure was measured using a Gaitview® system while sitting and performing PNF bilateral upper arm patterns. Resistance strength was provided by the blue elastic band. The statistical significance of the results was evaluated using a repeated one-way ANOVA and the independent t-test. The Bonferroni method was used for the post-hoc test. Results: The results revealed a significant change in the pelvic pressure when performing the PNF arm pattern. The average resistance pressure on the pelvis, with the elastic band, significantly increased after the initial sitting position (F=3.91, 3.92; p<0.05). No significant pelvic pressure changes were noted for each PNF upper arm pattern (p>0.05). Conclusion: The results of this study showed a positive relationship between pelvic pressure and the irradiation of PNF upper arm pattern exercises with resistance in the sitting position.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.2 s.30
• /
• pp.103-108
• /
• 1989

The purpose of this study was to confirm the difference of garment pressure and comfort depend on age group wearing the Korean skirt-band. A loadcell was used for measuring garment pressure, and 25 female subjects were chosen for each of young, middle, and old age groups. Garment pressure was measured in front, side, and back parts of the body. The results were as follows: 1. The younger the subjects, the greater the garment pressure. This suggests that the young age group wear the Korean skirt-band more tightly than needed. 2. The measurements of the pressure in 3 parts of the body were different. In young and middle age groups, pressure decreased from side to back, while in the old age group the order was side, back, and (rent. 3. The young age group felt high restriction of pressure. And the pressure in side part of body is the greatest among the three measurement.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.2
• /
• pp.131-138
• /
• 1981

The effect of axial stress on the plastic deformation of rigid-perfectly plastic cylindrical tube under the impulsive band pressure is investigated. It is assumed that the tube is constructed with the material of Tresca's yield criterion. A closed from sloution is obtained for a rectangular pulse shape of uniform band pressure by using the circumscribed yield surface. The analysis shows that the effect ot exial stress is negligible when the dimensionless axial stress(n$\sub$x/= N$\sub$x/.delta.$\sub$y/H) is less than 0.2 or the dimensionless whdth of band pressure(.xi.=C/.root.RH) is greater than 2, but the effect of axial stress is of considerable importance when the axial stress is greater than 0.3 and the width of band pressure is less than 1.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.194-200
• /
• 2001

In this study, the optical properties of diamond-like carbon(DLC) films, which was synthesized by 13.56 MHz rf plasma enhanced chemical vapor deposition system(PECVD), were investigated. We observed the variation of the transmittance and optical band gap with respect to deposition condition. The change of the transmittance and optical band gap of the DLC films were investigated as a function of RF power, working pressure, and additional gas. The optical band gap decreased with the increase of RF power and working pressure. We could verify the bond structures change of DLC films by observing the content of hydrogen using FT-IR spectroscopy. And the addition of hydrogen and nitrogen decreased the optical band gap by the breakage of C-H bond of DLC films during the deposition.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.02a
• /
• pp.62-70
• /
• 1999

Artesian pressure exists in Yangsan site, the maximum value of which has been measured as high as 5 t/m$^2$. This paper deals with the prediction of consolidation settlement for the site with artesian pressure. The consolidation settlement at the site has been accelerated using vertical band drains. Since the artesian pressure gives lower effective stress than a static condition, its effect should be considered in the settlement prediction. This case study shows that the prediction of settlement and pore pressure dissipation agrees well with the measurements, when considering the artesian effect.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.3
• /
• pp.75-84
• /
• 1994

In general direct-operated pressure reducing valves have been gardly applied to a dynamic control system such as active suspension control because of their poor control stability. But they are more robust than pilot-operated type and do not need pilot control flow. In this paper development of a new direct-operated proportional pressure reducing valve for low-band type active suspension control is reported. By means of a special damper directly linked to the valve spool, the control stability could be effectively improved without drawback in response time. The linearity error was less than $\pm$3.5%. Applied to an experimental active suspension system the new valve showed the $-90^{\circ}$ phase delay at 4Hz with 20% sinusoidal signal input and could control the suspension system with almost same performance as that with a pilot-operated type valve.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.3
• /
• pp.25-36
• /
• 2021

Background: This study aimed to investigate the effect of modified constraint-induced movement therapy (mCIMT) and resistive exercise using elastic band with pressure belt on improving upper extremity function in stroke patients. Methods: Sixteen patients with stroke were randomly assigned to a control group that received mCIMT and resistive exercise using elastic band (n=8) and an experimental group that received mCIMT and resistive exercise using elastic band with pressure belt (n=8). Over the course of four weeks, mCIMT were conducted 60 minute three times per week and resistive exercise using elastic band (with pressure belt) were conducted twice daily, three times per week. The function of the upper extremities were evaluated before, after 2 weeks and 4 weeks using the grip strength test (GST), the box and block test (BBT), and motor activity log (MAL). Results: The values for the GST, the BBT, and MAL increased in both groups as the treatment period progressed. The values for the GST (p<.01), the BBT (p<.001), and MAL (p<.001) were significantly higher in the experimental group than in the control group at 4 weeks after initiating the treatment. Conclusion: We found that mCIMT and wearing a pressure belt during resistive exercise was very useful in improving the function of the upper extremities in patients with stroke.