• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.1
• /
• pp.33-39
• /
• 1997

Recently the method of basal compound fertilizer (N : P : K = 18.2 : 9.8 : 35.0) Placement has been changed from banding to broadcasting in tobacco cultivation. The effects of the compound fertilizer placement, level of fertilizer and additional urea application on the agronomic characteristics, two chemical compositions and physical Properties of burley tobacco(Nicotiana tabacum L. cv. KB 108) were investigated at Chonju Experiment Station, Korea Ginseng and Tobacco Research Institute in 1995-1996. Six treatments consisted of (1) band (method of fertilizer Placement) + In kg/10a(compound fertilizer) + 0(additional urea applied), (2) broadcast+140+0, (3) broadcast+140+25, (4) band+180+0, (5) broadcast+180+0, and (6) broadcast +180+25. The additional urea was applied at hilling. No significant differences were detected between banding and broadcasting method of compound fertilizer Placement in field 9rowth, wield, organoleptic qualify(price Per kilogram), chemical composition and Physical properties of cured leaf, The increased compound fertilizer by 30%(40k/10a) or the additional urea application by 25kg per 10a produced slightly higher yield than the recommended amount of basal compound fertilizer without additional urea application did. It also increased the total alkaloid content of cured leaf. It is recommended that no more basal fertilizer above the recommended amount and no additional urea application are needed in burley tobacco fertilization, even though the method of basal fertilizer placement being chanced from banding to broadcasting. Key words : Nicotiana tabacum, fertilizer placement, additional urea.

• Journal of Surface Science and Engineering
• /
• v.46 no.1
• /
• pp.16-21
• /
• 2013

CIGS (Cu-In-Ga-Se) films were deposited on the Mo coated soda lime glass (Mo/SLG) by RF magnetron sputtering using a single sintered target with different chemical compositions. Heat treatment of the CIGS films were carried out under three different conditions, 1step ($350^{\circ}C$ for 2 hour and $550^{\circ}C$ for 2 hour) and 2step ($350^{\circ}C$ for 1 hour and $550^{\circ}C$ for 1 hour). In the case of CIGS films post-annealed on 2step method, grain size remarkably increased compared to other methods, indicating that chemical composition [Cu/(Ga+In) = 1] of CIGS films was same as CIGS target. After heat treatment by 2step method, band gap energy of the CIGS film deposited at RF 80 W showed 1.4 eV which is broadly similar to identical band gap energy (1.2 eV) of CIGS film prepared by evaporation method. Therefore, 2step heat treatment method could be expected to low temperature process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.687-692
• /
• 1998

Silicon doped $Al_{0.32}Ga_{0.68}As$ were growth by molecular beam epitaxy. Electroreflectance(ER) spectra of the $E_1$ transition of Schottky barrier Au/n-$Al_{0.32}Ga_{0.68}As$ have been measured at various modulation voltage($V_{ac}$) and dc bias voltage($V_{bias}$). from the $E_1$peak, band gap energy of the $Al_{0.32}Ga_{0.68}As$ is 1.883 eV which corresponds to an Al composition of 32%. As modulation voltage($V_{bias}$) is changed, a line shape at the $E_1$transition does not change, but its amplitude varies linearly. The amplitude of $E_1$signal decrease with increasing the forward dc bias voltage($V_{bias}$), but the line shape does not change. It suggests that the low field theory rather than Franz-Keldysh oscillation is Required to interpret spectra. Also, spectra at the $E_1$transition were broadened with increasing the reverse dc bias voltage($V_{bias}$) which suggests the presence of Field-induced broadening.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.92-96
• /
• 2009

A new precursor [$Zr(acac)_{3}(H_{2}O)_{2}$] was synthesized by Sonochemical technique and used to deposit thin $ZrO_{2}$ film on quartz and ceramic substrate via ultrasonic aerosol assisted chemical vapour deposition (UAACVD) at 300 ${^{\circ}C}$ in oxygen environment followed by annealing of the sample for 2-3 minutes at 500 ${^{\circ}C}$ in nitrogen ambient. The molecular structure of the precursor determined by single crystal X-ray analysis revealed that the molecules are linked through intermolecular hydrogen bonds forming pseudo six and eight membered rings. DSC and TGA/FTIR techniques were used to determine thermal behavior and decomposition temperature of the precursor and nature of evolved gas products. The optical measurement of annealed $ZrO_{2}$ film with tetragonal phase shows optical energy band gap of 5.01 eV. The particle size, morphology, surface structure and composition of deposited films were investigated by XRD, SEM and EDX.

• Korean Journal of Materials Research
• /
• v.12 no.1
• /
• pp.54-57
• /
• 2002

We have grown undoped $In_ xGa_{1-x}N,\; In_xGa_{1-x}N:Si\;and\;In_{0.1}Ga_{0.9}N:Zn$ thin films by MOCVD at temperature between 880 and $710^{\circ}C which endows various In composition in the epilayer from 0.07 to 0.22 as examined using X-ray diffraction, optical absorption(OA), photocurrent (PC) and photoluminescence (PL). The In molar fraction estimated from PL results is higher than that from the OA, PC, and X-ray data for $X{\le}0.22$, which may be caused by phase separation. However, the In molar fraction estimated by X-ray diffraction, OA, PC and PL for $In_xGa_{1-x}N:Si$ does not show discrepancy. With the appropriate Zn doping in undoped $In_{0.1}Ga_{0.9}N$, the emission peak is shifted from 3.15 eV which originates from the band edge emission peak to 2.65 eV which resulted from the conduction band to acceptor transition due to a deep acceptor level.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.116-119
• /
• 2003

[ $Hg_{1-x}Cd_xTe$ ] (MCT) was grown by hot wall epitaxy method. Prior to the MCT growth, the CdTe (111) buffer layer was grown on the GaAs substrate at the temperature of 590 C for 15 min. When the thickness of the CdTe buffer layer was 5 m or thicker, the full width at half maximum values obtained from the x-ray rocking curves were found to significantly decrease. After a good quality CdTe buffer layer was grown, the MCT epilayers were grown on the CdTe (111) /GaAs substrate at various temperature in situ. The crystal quality for those epilayers was investigated by means of the x-ray rocking curves and the photocurrent experiment. The photoconductor characterization for the epilayers was also measured. The energy band gap of MCT was determined from the photocurrent measurement and the x composition rates from the temperature dependence of the energy band gap were turned out.

• Journal of Sericultural and Entomological Science
• /
• v.31 no.1
• /
• pp.37-44
• /
• 1989

The parasporal crystals of Bacillus thuringinsis subspecies kurstaki, dendrolimus, finitimus, aizawai and israelensis were compared by polyacrylamide electrophoresis, amino acid composition and immunological analysis. In the subspecies of kurstaki, dendrolimus, finitimus and aizawai, the molecular weights of main subusnits of crystal solubilized by alkaline solution were 1.3${\times}$105 and 6.5${\times}$104 while those of subsp. israelensis were 4${\times}$104 and 1,4${\times}$104. The degradation of lepidopteran toxic subspecies crystals by silkworm midgut protease showed 6.0-6.4${\times}$104 molecular weight and the pattern of degradation of subsp. israelensis crystals was similar to that of alkaline solution treatment. In the amino acid composition, aspartic acid in subsp. israelensis and glutiamic acid in the other four subspecies were the most abundant. The immunological characteristics of the crystals revealed that the antibody produced against the alkali-solubilized crystal protein of subsp. israelensis reacted with only its antigen, but the crystal antigens from the other four lepidopteran toxic subspecies did cross-react with each other as well as with their own homologous antisera.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.500-506
• /
• 2015

In this paper, we designed and fabricated the EM wave absorber consisted of Sendust for suppressing EM wave noise PCB in ISM (Industrial, Scientific and Medical) band of 2.4 GHz. We fabricated several samples with different composition ratios of some kinds of Sendust to CPE (Chlorinated Ploy-ethylene) as a binder, and it was confirmed that the optimum composition ratio of absorbing materials was Flaked Sendust : CPE = 72.5 : 27.5 wt.%.. The absorbing abilities were simulated by changing the thickness and the measured material constants of EM wave absorber. The measured absorption abilities were analyzed and compared with the simulated ones. As a result, the simulated results agree well with the measured ones, and the developed EM wave absorber with extremely thin thickness of 0.6 mm has absorption ability of 5.4 dB at 2.4 GHz is excellent one. The thin type EM wave absorber can be applied for suppressing and absorbing electromagnetic noises from information and communication equipments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.9
• /
• pp.1234-1239
• /
• 2006

Murrah and NiliRavi are the important North Indian buffalo breeds occupying the prominent position of being the highest milk producers. These breeds are more or less similar at morphological as well as physiological levels. The technique of RAPD-PCR was applied in the present study to identify a battery of suitable random primers to detect genetic polymorphism, elucidation of the genetic structure and rapid assessment of the differences in the genetic composition of these two breeds. A total of 50 random primers were screened in 24 animals each of Murrah and NiliRavi buffaloes to generate RAPD patterns. Of these, 26 (52%) primers amplified the buffalo genome generating 263 reproducible bands. The number of polymorphic bands for the 26 chosen RAPD primers varied from 3 (OPG 06 and B4) to 26 (OPJ 04) with an average of 10.1 bands per primer and size range of 0.2 to 3.2 kb. DNA was also pooled and analyzed to search for population specific markers. Two breed specific RAPD alleles were observed in each of Murrah (OPA02 and OPG16) and NiliRavi (OPG09) DNA pools. RAPD profiles revealed that 11 (4.2%) bands were common to all the 48 individuals of Murrah and NiliRavi buffaloes. Pair-wise band sharing calculated among the individual animals indicated considerable homogeneity of individuals within the breeds. Within breed, band sharing values were relatively greater than those of interbreed values. The low genetic distance (Nei's) value (0.109) estimated in this study is in accordance with the origin and geographical distribution of these breeds. The RAPD analysis indicated high level of genetic similarity between these two important North Indian buffalo breeds.

• The Korean Journal of Zoology
• /
• v.29 no.3
• /
• pp.190-200
• /
• 1986

The male and female muscle of the 16 major bands in the protein patterns of the tissues of the mud-snail, Cipangopaludina chinensis malleata, were almost similar, and the bands E (Mr. 41,500), H (Mr. 52,100), L (Mr. 71,700), N(Mr. 98,500), O (Mr. 107,900) and P (Mr. 112,900) had the same molecular weights which appear in the muscles, testis and ovary. But it showed that the testis and the ovary had their characteristic patterns, and it was also observed that, besides the bands common to all tissues, the bands which appear both in the testis and the ovary are about five: the bands d (Mr. 15,600), k (Mr. 37,100), p (Mr. 57,000), s (Mr. 80,300), and v (Mr. 105,400). The result of the amino acid analysis showed that the quantity and composition of amino acid appeared, as the protein pattersn did, in the order of ovary, muscles and testis. This reveals that in the ovary a great quantity of protein which appears in the whole body was investigated, while the testis contained only little protein due to the phenomenon of morphogenesis in which sperms were developed through the condensation of the nuclei.