• Journal of the Korean Wood Science and Technology
• /
• 제45권2호
• /
• pp.139-146
• /
• 2017

This study was conducted to develop a new drying technology in order to quickly and massively dry bamboo tubes without crack and check. The bamboo tubes with the diameter of 45 mm - 68 mm had been impregnated in the solution of PEG-1000, and then were dried under room temperature and high temperature, respectively. The cracks occurred on all control specimens while no cracks were found on PEG treated specimens during drying at room temperature due to effect of PEG restraining the circumferential shrinkage of bamboo tube. But the drying period of this method was too long (200 days) compared to 10 hours of kiln drying. During fast high temperature drying, cracks occurred on all control specimens, but no cracks were found on PEG treated specimens, which could be accounted for more solidified PEG due to higher drying temperature and faster drying rate, and the tension set formed on the surface of bamboo tube in the early stage of drying owning to high drying temperature and low relative humidity. Thus, it is advised that PEG treated bamboo tube should be fast dried at high temperature in order to not only prevent crack or check in short drying period but also increase the dimensional stability of the products made of bamboo tubes.

• 한국연소학회지
• /
• 제15권1호
• /
• pp.30-37
• /
• 2010

Carbonization characteristics of Indonesian bamboos were investigated using lab-scale tube furnace, in order to find optimum design temperature of a carbonizer for producing bamboo charcoal and vinegar. The bamboo samples used in this study are local bamboos from Damyang in Korea, Andong and Petung in Indonesia. Correlation of electric resistance, specific surface area and pH of bamboo vinegar with pyrolysis temperature has been investigated. Electric resistance of the charcoal increased for higher pyrolysis temperature the specific surface area was also increased as carbonization temperature got higher. Charcoal which has specific surface area of over $300\;m^2/g$ could be produced at $700^{\circ}C$. pH of bamboo vinegar was decreased for highter carbonization temperature and vinegar under pH 3 could be produced for all bamboo samples. In this experimental condition, it was found that lower carbonization temperature is better for producing bamboo vinegar of high quality, while higher temperature is better for obtaining bamboo charcoal with larger surface.

• Journal of the Korean Wood Science and Technology
• /
• 제51권4호
• /
• pp.309-319
• /
• 2023

Bamboo culm is in the form of a tube/pipe, composed of internodes which are bounded by a partition/diaphragm (node). Anatomically, bamboo is composed of vascular bundles and parenchyma ground tissue. One of the constituents of vascular bundles is fibers that are grouped to form a fiber sheath. The anatomical structure of the nodes and internodes is thought to influence the strength of bamboo strips, including tensile strength. This study aimed to determine the characteristics of vascular bundles (distribution and fiber percentage) and their effects on the density and tensile strength of Gigantochloa apus bamboo strips with and without nodes. The bamboo culms were divided into three parts (outer, middle, and inner) along the radial direction. The results showed that the distribution of vascular bundles and percentage of fiber sheaths decreased significantly from the outer to the inner layer. This also had a significantly decreased density and tensile strength. Furthermore, the number of vascular bundles (in the transverse plane) was greater in the internodes than in the nodes. Anatomically, the orientation of the vascular bundles at irregular nodes is observed in the radial and tangential planes, where the direction is not only in the axial direction, but also in the radial and tangential directions. This caused the tensile strength of the G. apus bamboo strips to be lower at the nodes than at the internodes.

• 복식
• /
• 제58권3호
• /
• pp.105-115
• /
• 2008

A Go-go-kwan is a particular hat which has worn by married woman in Mongol and Yuan dynasty in China. It is also widely called as a Boktak in Mongol. The Go-go-kwan, recorded in jip-sa and in the miniature painting of 14th century is the early type of go-go-kwan. Later type can be seen from the relic collections of Gyeonggi Provincial Museum in Korea. The Go-go-kwan is composed with three parts ; feather part, tube part and hat part. Among the feathers, the largest one is as long as four times of the length of the tube and the shortest one is half the length of the tube. The tube is made of light weight wood such as white birch or bamboo, and covered with silk. Some of the hats were made exactly to fit on the head whereas others were designed to wear on the head as like jobawi.

• Journal of the Korean Wood Science and Technology
• /
• 제35권1호
• /
• pp.11-16
• /
• 2007

본 연구는 통죽의 송풍오븐 건조중 수증기댐 처리가 건조속도 및 할렬과 외주할 예방에 미치는 영향을 조사하였다. 생재에서 함수율 약 7~8%까지 건조되는데 소요되는 시간은 건조스케줄이 과격할수록 적었으며, 건조소요시간은 건조초기의 건조속도에 의해서 크게 좌우되는 것으로 나타났다. 건조중 횡단면적 수축율과 통피층의 두께수축율은 모두 비정상적일 정도로 매우 크게 나타났다. 무처리재의 경우 건조개시 직후 할렬과 외주할이 발생하였으며, 수증기댐 처리재에서는 약 67% 정도의 건조수율을 기대할 수 있었다. 수증기댐 처리재의 외주할은 건조조건 보다는 수증기댐 처리에 의한 횡단면을 통과하는 수분의 증발 차폐정도와 밀접한 관련이 있는 것으로 평가되었다.

• 한국분말재료학회지
• /
• 제21권5호
• /
• pp.371-376
• /
• 2014

In this study, modified catalytic chemical vapor deposition (CCVD) method was applied to control the CNTs (carbon nanotubes) growth. Since titanium (Ti) substrate and iron (Fe) catalysts react one another and form a new phase ($Fe_2TiO_5$) above $700^{\circ}C$, the decrease of CNT yield above $800^{\circ}C$ where methane gas decomposes is inevitable under common CCVD method. Therefore, we synthesized CNTs on the Ti substrate by dividing the tube furnace into two sections (left and right) and heating them to different temperatures each. The reactant gas flew through from the end of the right tube furnace while the Ti substrate was placed in the center of the left tube furnace. When the CNT growth temperature was set $700/950^{\circ}C$ (left/right), CNTs with high yield were observed. Also, by examining the micro-structure of CNTs of $700/950^{\circ}C$, it was confirmed that CNTs show the bamboo-like structure.

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.20-25
• /
• 2005

An x-ray PIV (Particle Image Velocimetry) technique was developed fur measuring quantitative information on flows inside opaque conduits and/or opaque-fluid flows. To check the performance of the x-ray PIV technique developed, it was applied to a liquid flow in an opaque Teflon tube. To acquire x-ray images suitable for PIV velocity field measurements, the refraction-based edge enhancement mechanism was employed with seeding detectable tracer particles. The amassed velocity field data obtained were in a reasonable agreement with the theoretical prediction. The x-ray PIV technique was also applied to get velocity fields of blood flow and to measure size and velocity of micro-bubbles simultaneously, and to visualize the water refilling process in bamboo leaves. The x-ray PIV was found to be a powerful transmission-type flow imaging technique fur measuring quantitative information of flows inside opaque objects and various opaque-fluid flows.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.499-503
• /
• 2018

In this paper, cobalt embedded in nitrogen and sulfur co-doped carbon nanotubes (CoNSTs) were synthesized for oxygen reduction reaction (ORR) catalysts. The CoNSTs were prepared through a facile heat treatment method without any templates. Different amounts of the metal salt were employed to examine the physicochemical and electrochemical properties of the CoNSTs. The CoNSTs showed the bamboo-like tube morphology with the encased Co nanoparticles in the tubes. Through the x-ray photoelectron spectroscopy analysis, the catalysts exhibited different chemical states of the nitrogen and sulfur species. As a result, the CoNST performed high activity toward the ORR in an acidic condition with the onset potential of 0.863 V (vs. reversible hydrogen electrode). It was clearly demonstrated from the electrochemical characterizations that the quality of the nitrogen and sulfur species significantly influences the ORR activity rather than the total amount of the dopants.

• 한국환경과학회지
• /
• 제22권11호
• /
• pp.1415-1419
• /
• 2013

This study was conducted to investigate the seasonal variation characteristics of phytoncide in trail of Ulsan Metropolitan. Air samples were collected from May to December 2011. They were collected using Tenax Ta tube and phytoncides were detected and quantified using a Gas Chromatograph Mass Spectrometer (GC/MSD). This study are summarized as follows; The seasonal concentrations of phytoncide are Munsu Mt. 272.3 ${\mu}g/m^3$, Samho Mt. 192.4 ${\mu}g/m^3$, Shinbul Mt. 50.9 ${\mu}g/m^3$, Sibli Bamboo forest 22.4 ${\mu}g/m^3$ and Joongbu Fire Station 24.4 ${\mu}g/m^3$. In Munsu Mt., Samho Mt. and Shinbul Mt. major component ratio is ${\alpha}$-Pinene > ${\beta}$-Pinene+Myrcene >Limonene >Camphene > ${\gamma}$-Terpinene > ${\alpha}$-Terpinene. Bamboo forest and Joongbu fire station major component ratio is ${\alpha}$-Pinene >Limonene > ${\beta}$-Pinene+Myrcene >Camphene > ${\alpha}$-Terpinene. The variation of seasonal concentration is summer >spring >fall >winter. The phytoncide concentration of coniferous forest(Munsu Mt., Samho Mt.) is higher than broadleaf forest(Shinbul Mt.).

• 자원환경지질
• /
• 제53권2호
• /
• pp.197-212
• /
• 2020

이 연구에서는 최초의 밭 유구가 발견된 고성 문암리 출토 신석기 전기와 중기의 토기를 대상으로 재료학적 특성과 소성조건을 분석하였다. 문암리 토기는 전기 신석기(BC 4000에서 6000)의 융기문, 죽관문, 무문 또는 주칠 토기와 중기 신석기(BC 3000에서 4000)의 횡주어골문, 단사선문 또는 격자문, 침선문 토기 등 6종으로 세분할 수 있다. 토기의 색도측정 결과, 적색 및 황색도가 높은 것으로 보아 전체적으로 산화소성되었으며 단면에서는 흑심이 관찰되기도 한다. 소성온도는 토기의 문양에 따라 차이는 없으며 800℃ 이하와 800~900℃의 범위를 보이는 두 그룹으로 구분된다. 미세조직 및 X-선 회절분석 결과, 죽관문 토기에서는 흑운모의 견운모화와 봉합선 조직이 발달한 석영 및 변질된 알칼리 장석이 확인되며, 토기의 주요광물은 석영과 알칼리 장석, 흑운모 외에도 녹니석과 각섬석이 동정되었다. 문암리 일대의 지질특성으로 볼 때, 유적의 10km 이내에는 각섬석 흑운모 화강암이 분포하며 변성암이 외곽의 산악지대를 이루고 있어 수계의 영향을 받아 토기의 원료물질인 토층이 산재한다. 이 토층과 토기에 포함된 봉합선상 조직이 발달한 석영으로 보아 변성암 기원의 원료물질이 활용된 것으로 추정된다. 토기의 지구화학적 표준화 결과, 문양에 관계없이 성인적으로 유사하여 신석기 시대의 전기와 중기의 시간적 차이에도 불구하고 유적지 주변의 토양을 사용하여 제작한 것으로 해석된다.