• 전자공학회논문지 IE
• /
• 제47권2호
• /
• pp.47-53
• /
• 2010

본 논문은 PLC를 이용하여 자동으로 제어되는 쇼트볼 이송 호이스트에 대해 연구하였다. 대형 선박 표면에 페인트를 다시 칠할 때 기존의 페인트를 제거하는데 이때 찌꺼기들을 완전히 제거하기 위해서 사용하는 것이 쇼트볼이다. 고철에서 쇳물을 만들고 냉각 시켜서 작은 쇼트볼을 만든 후 호이스트와 연결 된 전자석을 이용하여 호퍼로 이동하게 된다. 현재 쇼트 볼을 호퍼에 옮기는 과정을 살펴보면 조작기를 사용하여 사람이 수동으로 호이스트를 조작하고 있어서 쇼트볼을 이동하는데 비효율적이며 기기를 작동하는데 대충 감으로 작업을 하고 있다. 그래서 수동으로 조작되고 있는 호이스트를 정확하게 위치제어를 하고 효율적인 작업을 할 수 있도록 무인 자동화 장치를 개발하였다.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.670-676
• /
• 2019

We study substrate support structures and materials to improve uptime and shorten preventive maintenance cycles for chemical vapor deposition equipment. In order to improve the rolling of the substrate support, the bushing device adopts a ball transfer method in which a large ball and a small ball are mixed. When the main transfer ball of the bushing part of the substrate support contacts the substrate support, the small ball also rotates simultaneously with the rotation of the main ball, minimizing the resistance that can be generated during the vertical movement of the substrate support. As a result of the improvement, the glass substrate breakage rate is reduced by more than 90 ~ 95 %, and the equipment preventive maintenance and board support replacement cycles are extended four times or more, from once a month to more than four months, and the equipment uptime is at least 15 % improved. This study proposes an optimization method for substrate support structure and material improvement of chemical vapor deposition equipment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1561-1564
• /
• 2003

In the dynamic analysis model of full vehicles, the ball joint is usually modeled as an ideal joint. Searching a ball joint, the engineering plastic covers metal and the plastic has little compliance. It is expected that the compliance will physically have an influence on load transfer. This thesis presents a dynamic model considering the compliance of a ball joint, and studies an influence related to load transfer. It models the compliance of a ball joint to 3 directional spring. Likewise, it researches the load of a ball joint via a four-post simulation of a full vehicle, comparing with a model considered compliant and the model of an ideal joint. As a result, the difference between the compliance and the ideal joint model was determined. For this reasons, to conduct precision load prediction for durability analysis, dynamic analysis considering the compliance of bali joint should be required.

• KSTLE International Journal
• /
• 제1권1호
• /
• pp.63-68
• /
• 2000

Angular contact ball bearings are mainly used in the spindle, which requires high speed and stiffness. The heat generation is studied by experiments and simulations using a pair of angular contact ball bearings. The temperature variation of inner and outer races and the temperature increment distribution are measured by using thermocouples for the rotational speed, preload, viscosity of lubricant. The measured values from experiments are used to estimate the heat conduction rate. The method of oil-air lubrication is used for the experiment. The amount of conduction heat transfer to the test spindle and the convection heat transfer coefficients long the spindle are computed by using inverse method with temperature increment distribution. Total heat generation rate is estimated with the heat partition rate which is calculated from temperatures of inner and outer races. In addition, the empirical factor of oil-air lubrication method for Palmgren's heat generation model is suggested. The empirical friction coefficients, which are obtained from the experiments, depend on the preload condition, and can give us more accurate estimation of the heat generation in ball bearings.

• 문화기술의 융합
• /
• 제9권3호
• /
• pp.845-850
• /
• 2023

본 논문에서는 전이학습을 이용하여 볼베어링의 진동진단을 수행하는 방법을 제안한다. 고장을 진단하기 위해 진동신호를 시간-주파수로 분석할 수 있는 STFT을 CNN의 입력으로 이용하였다. CNN 기반의 딥러닝 인공신경망을 빠르게 학습하고 진단 성능을 높이기 위해 전이학습 기반의 딥러닝 학습 기법을 제안하였다. 전이학습은 VGG 기반의 영상 분류 모델을 이용하여 특징 추출기와 분류기를 선택적으로 학습하였고, 학습에 사용한 데이터 세트는 Case Western Reserve University 대학에서 제공하는 공개된 볼베어링 진동 데이터를 사용하였으며, 성능평가는 기존의 CNN 모델과 비교하는 방법으로 수행하였다. 실험 결과 전이학습이 볼베어링 진동 데이터에서 상태 진단에 유용하다는 것을 증명할 수 있을 뿐만 아니라 이를 통해 다른 산업에서도 전이학습을 사용하여 상태 진단을 개선할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.88-93
• /
• 1995

The ball screw preloaded for high nigidity and accuracy increases frictional resistance, therefore, its temperature and positioning error rise. In this paper, 2 diamensional temperature distributions of a ball screw with preload are analyzed according to the rotational speeds and stop times by a finite element method. The theremal behaviors of a ball screw are measured to examine the analyzed datum. The examined results show that the trends of temperature rising and axial distributions in steady state are nearly extimate but the temperature low. The differences of temperature ate seems to be caused by not exact heat transfer coefficients. More than an hour is consumed for calculation by FEM. So the modified lumped method for the real-time estimation of the thermal distribution is proposed. The estimated temperature of a ball serw by the modified lumped method is more exactly estimated than by FEM, nd that method takes less than several millisec. Moreover it can be used to estimate heat transfer coefficients.

• 대한기계학회논문집B
• /
• 제31권4호
• /
• pp.330-334
• /
• 2007

The objective of this study was to investigate the effecs of fouling mitigation for ceramic ball in cooling water system experimentally. The devices filled with ceramic balls were connected to the bypass line of the heat exchanging system. Cooling water in the heat exchanging system was artificial water. To visualize the formation of fouling on the heat transfer surface a number of images were obtained using a CCD camera with real-time microscopy. Fouling resistances and overall heat transfer coefficients were measured in order to analyze fouling mitigation effects. We found that the ceramic ball devices for artificial water reduced the formation of fouling compared to the no-mitigation devices.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1076-1079
• /
• 2009

This article deals with an optical image stabilizer which moves an image sensor in the direction of cancelling the vibration caused by hand shaking to prevent a photographed image from blurring. The ball-guide way method adopted as a transfer device of the image sensor is easy to be manufactured because of its simple structure and is suitable to minimize the friction between mechanisms, but has weakness of a chance of physical defect such as groove and rising. In case that the movement of the transfer device equipped with the image sensor is blunted because a ball is stuck in defects of guide way, the performance of the image stabilizer falls down drastically. We propose a method to prevent the transfer device from blunting by applying artificial vibration. At this time, the artificial vibration should be designed under consideration of dynamic characteristics and specifications of the system to be discriminated from the vibration caused by hand shaking.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.717-723
• /
• 2010

Radial stiffness of angular contact ball bearings are decreased remarkably at high speed revolution, because the inner and outer ball contact angle with races arc changed under the ball centrifugal forces at high speed. In the past, the optimizations of spindle units were done under the assumption of unchanged bearing stiffness for the whole speed range. But the bearing stiffness is changed and the dimension of optimum spindle is also changed with speed. In the design phase, only one model of many optimum spindle models with speed should be selected. As optimization criterion, the area of transfer function at spindle nose is proposed to estimate simply and accurately improvement of dynamic characteristics in spindle units. Finally, according to many analyses of diverse spindle models with decreased bearing stiffness, the spindle with shorter bearing span is better than longer bearing span from the viewpoint of dynamic characteristics.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.155-156
• /
• 2002

During the sliding between a-CNx and $Si_3N_4$, applying nitrogen as environmental gas provided very low friction as the level of 0.01 in friction coefficient. In order to know the effect of the running-in process on the reduction of the friction, the effect of surface roughness of mating surface on friction was investigated. It was shown that smooth surface in wear scar of ball provided low friction coefficient. Friction coefficient after running-in was proportional to the Ry value of wear scar of ball. Also smooth thin transferred layer was observed on the wear scar of balls with an AFM after sliding test. Those results showed the smoothing of wear scar of ball, the generating of the transferred layer from CNx was necessary for low friction.