• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.49-56
• /
• 2022

In this study, numerical simulations for reducing noise between floors in an apartment building was carried out using Active Noise Control (ANC) technology. In order to examine the feasibility of using ANC to reduce noise between floors, accelerometers and microphones for noise collection were installed in the inter-floor noise test facility to measure noise and vibration caused by the impact ball drop test. By using the measured data, Filtered-x Least Mean Square (Fx-LMS) algorithm-based ANC simulations were carried out. In the simulations, after deriving optimal simulation conditions including the adaptive control convergence coefficient, the noise reduction effect was analyzed through numerical simulations using the number of installed accelerometers and speakers as variables. Finally, it was confirmed that the noise between floors could be reduced using ANC technology under limited conditions.

• Journal of People, Plants, and Environment
• /
• v.24 no.1
• /
• pp.39-51
• /
• 2021

Background and objective: Urban topology can be characterized as impervious, which changes the hydrologic features of an area, increasing surface water flow during local heavy rain events. The pluvial flooding is also influenced by the vertical structures of the urban area. This study suggested a modified digital elevation model (DEM) to identify changes in urban hydrological conditions and segmentalized urban micro catchment areas using a geographical information system (GIS). Methods: This study suggests using a modified DEM creation process based on Rolling Ball Method concepts along with a GIS program. This method proposes adding realized urban vertical data to normal DEM data and simulating hydrological analyses based on RBM concepts. The most important aspect is the combination of the DEM with polygon data, which includes urban vertical data in three datasets: the contour polyline, the locations of buildings and roads, and the elevation point data from the DEM. DEM without vertical data (DCA) were compared with the DEM including vertical data (VCA) to analyze catchment areas in Shin-wol district, Seoul, Korea. Results: The DCA had 136 catchments, and the area of each catchment ranged from 3,406 m² to 423,449 m². The VCA had 2,963 catchments, with the area of each ranging from 50 m² to 16,209 m². The most important finding is that in the overlapped VCA; the boundary of areas directly affected by flooding and the direction of surface water flow could be identified. Flooding data from September 21, 2010 and July 27, 2011 in the Shin-wol district were applied as ground reference data. The finding is that in the overlapped VCA; the boundary of areas directly affected by flooding and the direction of surface water flow could be identified. Conclusion: The analysis of the area vulnerable to surface water flooding (SWF) was more accurately determined using the VCA than using the DCA.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.4
• /
• pp.133-139
• /
• 2022

PURPOSE: The purpose of this study was to investigate the effects of a group exercise program with competitive games on balance in chronic stroke patients. METHODS: The subjects were chronic stroke patients living at home after their discharge from the hospital. A total of 32 subjects were divided into two groups. The experimental group performed a group exercise program with competitive games, and the control group performed individual exercises. The exercise program duration was one hour, and it comprised 10 minutes of stretching, 40 minutes of the main exercise, and 10 minutes of stretching at the end. The experimental group was divided into two teams of 8 players each and played competitive games (transfer a gym ball to another person, relay 10 m walking and return, transfer an object to the next person using both arms while sitting). The control group performed an arm/trunk exercise for 15 minutes and gait training for 25 minutes. These exercises were conducted twice a week (4 weeks). The Berg Balance Scale (BBS) and timed up-and-go (TUG) tests were performed to confirm the change in balance. RESULTS: In the experimental group, BBS showed a significant increase (p < .05) and TUG showed a significant decrease (p < .05). In the control group, there was no statistically significant change in the BBS. However, the TUG showed a significant decrease (p < .05). The BBS and TUG both showed statistically significant differences (p < .05) in the between-group comparison of the change in pre-post intervention values. CONCLUSION: A group exercise program with competitive games to improve the balance ability for fall prevention in chronic stroke patients could be used as a good intervention method.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1239-1246
• /
• 2022

This paper introduces the effect of grease on the degradation characteristics of bearings used as key components of packaging equipment and automation systems. Bearings parts are installed to fix and support the rotating body of the system, and performance degradation of the bearings has a great effect on the life of the system too. When bearings are used in various devices and systems, the grease is applied to reduce friction and improve fatigue life. Determining the type of lubricant (grease) is important because it has a great influence on the operating environment and lifespan and ensures long lifespan of systems and facilities. However, studies that simultaneously compared and analyzed the change in mechanical degradation characteristics and the comparison of chemical degradation characteristics according to grease types under actual operating conditions are insufficient. In this paper, three types of small harmonic drive, high-load reducer, and low-load reducer grease used in power transmission joint modules are experimentally selected and finally injected into ball bearings with a load (19,500N) to improve bearing durability. Degradation characteristics were tested by attaching to test equipment. At this time, after the durability test under the same load conditions, the mechanical degradation characteristics, that is temperature, vibration according to the three greases types. In addition, the chemical degradation characteristics of the corresponding grease was compared to present the results of mutual correlation analysis.

• Tribology and Lubricants
• /
• v.37 no.6
• /
• pp.246-252
• /
• 2021

Among the engine components of an internal combustion engine, the valve train is a series of systems that supply intake gas to the combustion chamber and operate intake and exhaust valves that discharge exhaust gas. If excessive wear occurs in the valve train system, the suction and exhaust valves do not open and close on time, which leads to abnormal combustion and exhaust gas. In this study, we conduct experiments and analyses on friction and wear characteristics of the valve train system. Moreover, we experimentally study the correlation between the pinball and pinball cap on engine oil lubrication, friction experiment, wear amount analysis, and surface analysis. Specifically, we experiment using Ball on reciprocating tribo-tester and apply commercial engine oil sold on the market engine oil. We construct the experimental conditions for each new oil and oil. Accordingly, the completed specimen was subjected to a confocal microscope to check the wear volume, observe the surface of the specimen, and confirm the elemental components using a scanning microscope (SEM) and an energy dispersion X-ray spectrometer (EDS). Through this experiment, we analyze the friction and wear characteristics of valve train components according to engine oil grade, and the obtained data serve as an effective engine oil management method.

• Journal of Powder Materials
• /
• v.29 no.5
• /
• pp.382-389
• /
• 2022

A typical trade-off relationship exists between strength and elongation in face-centered cubic metals. Studies have recently been conducted to enhance strength without ductility reduction through surface-treatment-based ultrasonic nanocrystalline surface modification (UNSM), which creates a gradient microstructure in which grains become smaller from the inside to the surface. The transformation-induced plasticity effect in Fe-Mn alloys results in excellent strength and ductility due to their high work-hardening rate. This rate is achieved through strain-induced martensitic transformation when an alloy is plastically deformed. In this study, Fe-6%Mn powders with different sizes were prepared by high-energy ball milling and sintered through spark plasma sintering to produce Fe-6%Mn samples. A gradient microstructure was obtained by stacking the different-sized powders to achieve similar effects as those derived from UNSM. A compressive test was performed to investigate the mechanical properties, including the yielding behavior. The deformed microstructure was observed through electron backscatter diffraction to determine the effects of gradient plastic deformation.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.175-181
• /
• 2023

In offshore plants, various equipments including cranes and davits are used for safety management. Hydraulic cylinder type actuators are mainly used for luffing operations such as cranes and davits. However, in the case of a cylinder using hydraulic pressure, a separate power pack is required to supply hydraulic pressure. When used for a long time, maintenance costs such as sticking of hydraulic valves, contamination of hydraulic oil and deterioration of hydraulic hoses occur. In addition, a lot of hydraulic oil is used in the handling of cranes and davits, which causes marine pollution due to management problems. As a result, as interest in marine pollution prevention has increased recently, interest in actuators that do not use hydraulic pressure is also increasing. Therefore, in this study, we intend to develop a davit with an electric cylinder type actuator that uses electricity rather than hydraulic pressure by the SOLAS regulation. In other words, the conceptual design of the davit driven through the linear motion of the ball screw using electricity is performed, and the structural safety of the drive is also reviewed so that it can be utilized in the industrial field.

• The Journal of Korean Academy of Sensory Integration
• /
• v.20 no.3
• /
• pp.1-13
• /
• 2022

Objective : The purpose of this study was to investigate changes in somato-sensory and occupational performance of individually tailored sensory integration interventions for school-age children with somatodyspraxia. Methods : A single subject study with an AB design was conducted the total sessions were 11 sessions, consisting of 3 baseline sessions and 8 intervention sessions. To compare the effects before and after the intervention, the intervention was measured by dividing it into Performance Area (PA) and Performance Factor (PF), and after each intervention session, the Goal Attainment Scale (GAS) was implemented. Results : The children participating in this study showed overall improvement in PA and PF after the intervention, and after each session, it was confirmed that the GAS increased when measuring the target activities (Supine Flexion Posture; SFP, Walking by Arms; WA, Stand on Balance Ball; SBB). Conclusion : This study provided evidence that sensory integration has a positive effect on performing target activities (SFP, WA, SBB) and improving relationships with peers in children with somatodyspraxia.

• Journal of Powder Materials
• /
• v.29 no.6
• /
• pp.492-498
• /
• 2022

N-doped Na₂Ti₆O₁₃@TiO₂ (denoted as N-NTO@TiO₂) composites are successfully synthesized using a simple two-step process: 1) ball-milling of TiO₂ with Na₂CO₃ followed by heat treatment at 900℃; 2) mixing of the prepared Na₂Ti₆O₁₃ with titanium isopropoxide and calcining with urea at 500℃. The prepared composites are characterized using XRD, SEM, TEM, FTIR, and BET. The N-NTO@TiO₂ composites exhibit well-defined crystalline and anatase TiO₂ with exposed {101} facets on the external surface. Moreover, dopant N atoms are uniformly distributed over a relatively large area in the lattice of the composites. Under visible light irradiation, ~51% of the aqueous methylene blue is photodegraded by N-NTO@TiO₂ composites, which is higher than the values shown by other samples because of the coupling effects of the hybridization of NTO and TiO₂, N-doping, and presence of anatase TiO₂ with exposed {101} facets.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.8
• /
• pp.119-126
• /
• 2023

In this paper, a new model was presented to objectively evaluate the defense ability of defenders in Korean professional baseball. In the proposed model, using Korean professional baseball game data from 2016 to 2019, a representative defender was selected for each team and defensive position to evaluate defensive ability. In order to evaluate the defense ability, a method of calculating the defense range for each position and dividing the calculated defense area was proposed. The defensive range for each position was calculated using the Convex Hull algorithm based on the point at which the defenders in the same position threw out the ball. The out conversion score and victory contribution score for both infielders and outfielders were calculated as basic scores using the defensive range for each position. In addition, double kill points for infielders and extra base points for outfielders were calculated separately and added together.