• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1079-1086
• /
• 2012

In this paper, X-band 60 W Solid-State Power Amplifier with sequential control circuit and pulse width variation circuit for improve bias of SSPA module was designed. The sequential control circuit operate in regular sequence drain bias switching of GaAs FET. The distortion and efficiency of output signals due to SSPA nonlinear degradation is increased by making operate in regular sequence the drain bias wider than that of RF input signals pulse width if only input signal using pulsed width variation. The GaAs FETs are used for the 60 W SSPA module which is consists of 3-stage modules, pre-amplifier stage, driver-amplifier stage and main-power amplifier stage. The main power amplifier stage is implemented with the power combiner, as a balanced amplifier structure, to obtain the power greater than 60 W. The designed SSPA modules has 50 dB gain, pulse period 1 msec, pulse width 100 us, 10 % duty cycle and 60 watts output power in the frequency range of 9.2~9.6 GHz and it can be applied to solid-state pulse compression radar using pulse SSPA.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.27-35
• /
• 2013

In this paper, a compact, broadband quasi-Yagi antenna utilizing balance analysis of the ultra-wideband microstrip-to-coplanar stripline(MS-to-CPS) balun is proposed. The antenna size was reduced by removing the reflector on bottom layer and ground plane is used as a reflector. A planar balun that transforms from microstrip(MS) to balanced coplanar stripline(CPS) is characterized in the amplitude and phase imbalances at CPS output ports are investigated and discussed. As compared with the conventional balun, the proposed MS-to-CPS balun demonstrated very wideband performance from 7 to over 20 GHz. From the simulation study, amplitude and phase imbalances are within 1 dB and ${\pm}5^{\circ}$, respectively. The implemented antenna provides very wide bandwidth from 6.9 to 15.1 GHz(74.5 %). The gain of the antenna is from 3.7 to 5.5 dBi, the front-to-back ratio is more than 10 dB, and the nominal radiation efficiency is about 94 %.

• Korean Journal of Clinical Pharmacy
• /
• v.12 no.2
• /
• pp.71-75
• /
• 2002

This study was carried out to compare the bioavailability of $Ceclex^{(R)}$ (test drug, cefaclor 250 mg/capsule) with that of $Ceclor^{(R)}$ (reference drug) and to estimate the pharmacokinetic parameters of cefaclor in healthy Korean adult. The bioavailability was examined on 20 healthy volunteers who received a single dose (250 mg) of each drug in the fasting state in a randomized balanced 2-way crossover design. After dosing, blood samples were collected for a period of 6hours. Plasma concentrations of cefaclor were determined using HPLC with UV detection. The pharmacokinetic parameters $(AUC_{0-6hr},\;C_{max},\;T_{max},\;AUC_{int},\;K_e,\;t_{1/2},\;Vd)$ F, and CL/F) were calculated with non-compartmental pharmacokinetic analysis. The ANOVA test was utilized for the statistical analysis of the $T_{max},\;log-transformed\;AUC_{0-6hr}\;log-transformed\;C_{max},\;t_{l/2},\;V_d/F$, and CL/F. The ratios of geometric means of AUC0-6hr and $C_{max}$ between test drug and reference drug were $103.2\%\;(6.74\;{\mu}g{\cdot}hr/ml\;vs\;6.53{\pm}g{\cdot}hr/ml)\;and\;100.4\%\;(4.85\;{\mu}g\ml\;vs\;4.82\;{\mu}g/ml)$, respectively. The $T_{max}$ of test drug and reference drug were $0.9\pm0.38\;hr\;and\;0.83\pm0.34$ hrs, respectively. The $90\%$ confidence intervals of mean difference of logarithmic transformed $AUC_{0-6h},\;and\;C_{max}$ were log $0.98{\sim}log$ 1.08 and log $0.88{\sim}log1.15$, respectively. It shows that the bioavailability of test drug is equivalent with that of reference drug. The estimated half-life of this study was longer $(1.21\pm0.27\;hrs\;vs\;0.5-1\;hr)$, the Vd/F was larger $(68.89\pm25.72L$ vs 24.9L), and the CL/F was higher $(38.62\pm7.09\;L/hr$ vs 24.9 L/hr) than the previously reported values.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.288-293
• /
• 2016

Purpose: The purpose of this study was to investigate the key factors in designing a three-wheeled two-row soybean reaper (riding type) that is suitable for soybean production, and ensure worker safety by proposing optimal work conditions for the prototype of the designed machine in relation to the slope of the road. Methods: A three-wheeled two-row soybean reaper (riding type) was designed and its prototype was fabricated based on the local soybean-production approach. This approach was considered to be closely related to the prototype-designing of the cutter and the wheel driving system of the reaper. Load distribution on the wheels of the prototype, its minimum turning radius, static lateral overturning angle, tilt angle during driving, and The working and rear overturning (back flip) angle were measured. Based on the gathered information, investigations were conducted regarding optimal work conditions for the prototype. The investigations took into account driving stability and worker safety. Results: The minimum ground clearance of the prototype was 0.5 m. The blade height of the prototype was adjusted such that the cutter was operated in line with the height of the ridges. The load distribution on the prototype's wheels was found to be 1 (front wheel: F): 1.35 (rear-left wheel: RL): 1.43 (rear-right wheel: RR). With the ratio of load distribution between the RL and RR wheels being 1: 1.05, the left-to-right lateral loads were found to be well-balanced. The minimum turning radius of the prototype was 2.0 m. Such a small turning radius was considered to be beneficial for cutting work on small-scale fields. The sliding of the prototype started at $25^{\circ}$, and its lateral overturning started at $39.3^{\circ}$. Further, the critical slope angle for the worker to drive the prototype in the direction of the contour line on an incline was found to be $12.8^{\circ}$, and the safe angle of slope for the cutting was measured to be less than $6^{\circ}$. The critical angle of slope that allowed for work was found to be $10^{\circ}$, at which point the prototype would overturn backward when given impact forces of 1,060 N on its front wheel. Conclusions: It was determined that farmers using the prototype would be able to work safely in most soybean production areas, provided that they complied with safe working conditions during driving and cutting.

• Korean Journal of Clinical Pharmacy
• /
• v.9 no.1
• /
• pp.49-54
• /
• 1999

This study was carried out to compare the bioavailability of Hanmi clarithromycin (250 mg/tablet) with that of $Klaricid^{(R)}$ The bioavailability was examined on 20 volunteers who received a single dose (500 mg) of each drug in the fasting state in a randomized balanced 2-way crossover design. After dosing, blood samples were collected for a period of 12 hours. Plasma samples were analyzed for clarithromycin and roxithromycin(internal standard) by HPLC/Coulometric BCD. The pharmaco-kinetic parameters ($AUC_{0-l2hr}$, Cmax, Tmax, $AUC_{inf}$, Ka, Kel, $t_{1/2}$, Vd/F and Cl/F) were calculated from the plasma clarithromycin concentration-time data of each volunteer. The computer program 'WinNonlin' was used for compartmental analysis. One compartment model with first-order input, from order output with lag time, weighting factor $l/y^2$ was chosen as the appropriate pharmacokinetic model. The major pharmacokinetic parameters ($AUC_{0-l2hr},\;AUC_{inf}$, Cmax and Tmax) of Hanmi clarithromycin were $10.7\pm0.5\;{\mu}g{\cdot}hr{\cdot}ml^{-1},\;12.7\pm0.7\;{\mu}g{\cdot}hr{\cdot}ml^{-1},\;1.7\pm0.1\;{\mu}g/ml\;and\;2.0\pm0.2\;hr$, respectively, and those of $Klaricid^{(R)}\;were\;9.8\pm0.5\;{\mu}g{\cdot}hr{\cdot}ml^{-1},\;11.7\pm0.6\;{\mu}g{\cdot}hr{\cdot}ml^{-1},\;1.6\pm0.1\;{\mu}g/ml\;and\;2.1\pm0.1\;hr$, respectively. The differences in mean values of $AUC_{0-l2hr},\;AUC_{inf}$ and Cmax between two products were $9.88\%,\;8.94%\;and\;6.59\%$, respectively. The least significant differences at $\alpha=0.05$ for $AUC_{0-l2hr},\;AUC_{inf}$ and Cmax were $16.08\%,\;17.81\%\;and\;18.94\%$, respectively. Though the plasma clarithromycin concentrations of Hanmi clarithromycin were higher than those of $Klaricid^{(R)}$ at all observed times, the bioavailability of Hanmi clarithromycin appeared to be bioequivalent with that of $Klaricid^{(R)}$. The Ka, Kel, $t_{1/2}$, Vd/F and Cl/F of the Hanmi clarithromycin were $2.69\pm0.53\;hr^{-1},\;0.18\pm0.01 hr^{-1},\;3.9\;hr,\;248.8\pm11.4\;L\;and\;43.7\pm2.6\;L/hr$, respectively, and those of $Klaricid^{(R)} were 2.19\pm0.51\;hr^{-1},\;0.18\pm0.02\;hr^{-1},\;3.7\;hr,\;266.7\pm22.4\;L\;and\;45.3\pm2.8L/hr$, respectively. There were no statistically significant differences between two drugs in all pharmacokinetic parameters.

• Journal of Digital Convergence
• /
• v.17 no.6
• /
• pp.373-380
• /
• 2019

In this study, I examined the visual elements for narrative structure and the symbols, scene components and visual styles in the images through analyze the flat staging in Tomm Moore's animated feature film, . As a research method, I figure out the general theories about staging and analyze extracted scenes which revealed flat staging in the , then summarize and clarify the flat staging production elements and features of Tomm Moore. As a result, in , the composition of the screen using the basic shapes, the screen composition containing the spiral which is symbol of the Celtic traditional pattern, the stable and flat frame expression through the balanced screen composition, expression of spatial sensation using perspective, appearance of the period by using the inverted perspective, and composition that can emphasize the flat formability are appeared as a characteristic. Through this, the two-dimensional planarity was maximized to convey the feeling of appreciating the illustrations of fairy tales. Tomm Moore, who produced animation based on folk tales in order to inherit the traditional culture of Ireland, has been attracting worldwide attention because of its flat staging to help narrative, enhancing the original expression and performance of animation. I hope that this study will be used as basic data for industry workers and researchers who make unique and excellent animated feature film.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.79-87
• /
• 2021

This study was conducted with the main purpose of designing a roadmap for the development and operation of the Duksung IiRUM personality education curriculum from the perspective of alternatives to the educational innovation of Duksung Women's University. The research method consisted of a procedure of analyzing the literature dealing with theoretical considerations or case plans to establish the foundation of the university personality education curriculum, along with an expert meeting. The contents of this study are presented a roadmap of how the personality education curriculum, which should be newly constructed from the alternative point of view of educational innovation, which has not been established the foundation of personality education throughout the current curriculum of Duksung Women's University, can be designed in a convergent manner in the current curriculum composition. Accordingly, various measures have been suggested to develop and operate the Duksung IiRUM personality education curriculum across subject matters education and extracurricular education programs. As a result of the study, it was analyzed that the Duksung IiRUM personality education curriculum at Duksung Women's University could be developed in a balanced and convergent manner with the existing and current curriculum composition, and could also be expected to operate effectively.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.307-313
• /
• 2022

In Korea, youth participation in economic activities and unemployment appear at the same time, which is a more serious problem, so a study on the labor market movement can be viewed as a study to overcome youth unemployment. The purpose of this study is to examine how labor movement between the employed and the unemployed is progressing through the survey data of the youth panel among the employment panel and to identify the factors affecting the movement path and movement of the employed and the unemployed. In the case of the employed, they possessed professional qualifications, and in the case of unstable occupational status, they attempted to move to a stable position after being employed. In the case of the unemployed, the probability of failing to find a job was higher as they had no job search experience, the longer the job search period, and the less effort they made. The fact that the home environment directly or indirectly influences the movement of the labor market remains unchanged. On the other hand, the higher the educational level, the more stable, and the most stable the metropolitan area. Therefore, more urgently than ever, a plan to revitalize the local labor market through the organic relationship between the government, local governments, local industry, and local universities and balanced regional development should be sought.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.48-48
• /
• 2010

Sound quality and NVH-issues(Noise, Vibration and Harshness) of vehicles has become very important for car manufacturers. It is interpreted as among the most relevant factors regarding perceived product quality, and is important in gaining market advantage. The general sound quality of vehicles was gradually improved over the years. However, today the development cycles in the automotive industry are constantly reduced to meet the customers' demands and to react quickly to market needs. In addition, new drive and fuel concepts, tightened ecological specifications, increase of vehicle classes and increasing diversification(increasing market for niche vehicles), etc. challenge the acoustic engineers trying to develop a pleasant, adequate, harmonious passenger cabin sound. Another aspect concerns the general pressure for reducing emission and fuel consumption, which lead to vehicle weight reductions through material changes also resulting in new noise and vibration conflicts. Furthermore, in the context of alternative powertrains and engine concepts, the new objective is to detect and implement the vehicle sound, tailored to suit the auditory expectations and needs of the target group. New questions must be answered: What are appropriate sounds for hybrid or electric vehicles? How are new vehicle sounds perceived and judged? How can customer-oriented, client-specific target sounds be determined? Which sounds are needed to fulfil the driving task, and so on? Thus, advanced methods and tools are necessary which cope with the increasing complexity of NVH-problems and conflicts and at the same time which cope with the growing expectations regarding the acoustical comfort. Moreover, it is exceedingly important to have already detailed and reliable information about NVH-issues in early design phases to guarantee high quality standards. This requires the use of sophisticated simulation techniques, which allow for the virtual construction and testing of subsystems and/or the whole car in early development stages. The virtual, testing is very important especially with respect to alternative drive concepts(hybrid cars, electric cars, hydrogen fuel cell cars), where complete new NVH-problems and challenges occur which have to be adequately managed right from the beginning. In this context, it is important to mention that the challenge is that all noise contributions from different sources lead to a harmonious, well-balanced overall sound. The optimization of single sources alone does not automatically result in an ideal overall vehicle sound. The paper highlights modern and innovative NVH measurement technologies as well as presents solutions of recent NVH tasks and challenges. Furthermore, future prospects and developments in the field of automotive acoustics are considered and discussed.

• Journal of Service Research and Studies
• /
• v.12 no.3
• /
• pp.115-133
• /
• 2022

This study was conducted to design a new human model and education system for the sustainable life of mankind. Human society is facing a crisis. This study presents a comprehensive plan as the final version of the servicism study. Since the problems of human society are all human problems, research was conducted focusing on the new human and education system. Modern society is markedly different from the existing society in terms of time, space, and humanity, and the leading role of individuals is increased due to the increase in literacy, which can lead to breakdown and ground breaking in an instant. As the value of growth and freedom is increasing, technological innovation is accelerating, and industries and enterprises are growing significantly, so new technologies and industries may put human society at great risk. This study comprehensively diagnosed these problems in the current human society. The problems related to human and education were presented in depth while analyzing and synthesizing the problems presented in the existing servicism studies. The necessary and sufficient conditions for a new system to solve the problems raised were derived. And a system that satisfies these conditions was derived and presented. The new system was named servicism human and education system as a system based on the service philosophy. The structure, operation model, and implementation plan of the new system were presented. The basic structure is a human view that recognizes both reason and irrationality, an education system in which intelligence education and virtue education are balanced, and an education system in which human effort and the values of unwieldy nature are respected. A new education system needs to be put into operation along with the improvement of modern ideology and the compensation system for efforts. Since this study presented a macroscopic direction, further studies are needed to further refine this study.