• The KSFM Journal of Fluid Machinery
• /
• v.2 no.2 s.3
• /
• pp.19-26
• /
• 1999

Thermal output in a nuclear power plant is verified with calorimetric heat balance on the secondary plant. The calorimetry involves the precise measurement of the feedwater flow rate. However, the correct indication of feedwater flow rate obtained by a pressure-difference measurement across a venturi can be affected by instrument errors, fouling or a poorly developed velocity profile. This can result in an inaccurate mass flow rate and consequently an inaccurate estimate of power. The purpose of this study is to develop verification methods with accuracy better than $0.5\%$ for high precision flow measurement to be used for measuring feedwater flow rate. This chemical tracer method is a testing process that uses tracers which can be applied to quantify losses in electrical output due to the incorrect measurements of feedwater flow rate. And this system has good response to the variation of the flow rate. Accuracy of better than 0.5 percent can be expected for feedwater flow measurement, providing that the system can be stabilized during the test. This methodology is applicable to other flow systems well.

• Journal of Radiation Protection and Research
• /
• v.9 no.1
• /
• pp.11-18
• /
• 1984

A Standard gamma-ray ionization chamber system was developed with a well type ionization chamber and micro current measuring circuit. Micro current was measured by the automatic Townsend balance with stepwise compensation method. For gamma emitting nuclides such as $^{241}Am,\;^{133}Ba,\;^{60}Co,\;^{134}Cs,\;^{137}Cs,\;and\;^{22}Na$ relative calibration factors to $^{226}Ra$ reference source were calculated and detection .efficiency curve was determined as a fudnction of gamma energy.

• Journal of Korean Physical Therapy Science
• /
• v.26 no.3
• /
• pp.70-75
• /
• 2019

Purpose: The purpose of this study was to investigate the changes of static and dynamic balance control ability according to the stability of shoes in elderly woman and female university student. Design: Cross-sectional study. Methods: Six elderly women and seven female university students were recruited for this study. The subject's static and dynamic balance were evaluated while wearing two different types of shoes (comfortable running shoe and masai walking shoe). The BT4 system was used to measure the static (postural sway area and velocity) and dynamic balance (limit of stability on forward, backward and left and right side). The measurement of static and dynamic balance control ability was performed in standing posture wearing comfortable running shoes and masai walking shoes. Results: In the static balance control ability, both female university students and elderly women showed significant increase in postural sway area and velocity when wearing unstable shoes (p<0.05) In addition, in the dynamic balance control ability, both female university students and elderly women showed significant decrease in limit of stability on forward and backward when wearing unstable shoes (p<0.05). Conclusion: In selecting shoes for the elderly, the stability of shoe should be considered for prevention of falls.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.29-35
• /
• 1996

For the Reactor Coolant System(RCS) flow rate measurement by the secondary calorimetric heat balance method, the coolant temperature of the hot leg is needed. Several Resistance Temperature Detectors(RTD) are installed in the hot leg to measure the temperature, but the average value of RTDs does not correctly represent the energy-averaged(bulk) temperature because of the thermal stratification phenomenon. Therefore some correction is introduced to predict the bulk temperature, but the correction inevitably contains uncertainty because the stratification is not defined well quantitatively yet. Therefore a large uncertainty for the correction has been used for the conservative estimation. But unrealistically large uncertainty causes degradation of the measurement method and yields difficulty to meet the acceptance criterion in start-up flow measurement test. In this paper, an analytical estimation is made on the correction and the related uncertainty using the measured hot leg velocity profile of System 80 reactor flow model test and the measured temperatures of YGN 3&4 and PVNGS 1&2 start-up tests. The results reveal that the magnitude of the correction uncertainty is much smaller than that used in the previous design. Therefore, the confidence on the flow rate measurement method can be improved and the difficulty in start-up flow measurement test can be lessened if the smaller correction uncertainty obtained through this estimation is applied.

• The Journal of Korean Physical Therapy
• /
• v.21 no.2
• /
• pp.31-38
• /
• 2009

Purpose: This study was examined the effect of training using a Virtual Reality System on the sitting balance and Activities of Daily Living for patients with a spinal cord injury. Methods: The subjects were divided into an experimental (6 persons) and control group (5 persons). The experimental group trained the 5 programs, three times per week for 6 weeks using the Virtual Reality System and five days for week using conventional physical therapy. The control group trained five days for a week using conventional physical therapy. Results: The difference in the mean Spinal Cord Independence Measurement (SCIM) score in the experimental and control groups was increased to 8.33 and 6.60 (p=0.79), respectively. The difference in the mean functional reaching test in experimental and control group increased to 4.21 and 1.09 (p=0.25), respectively. The difference in the mean sitting time in experimental and control group increased to 41.05 and 10.33 (p=0.66), respectively. There was a difference in the mean of all variances but these differences were not statistically significant. Conclusion: These results suggest that training using the Virtual Reality System increased the SCIM, functional reaching test and sitting time in people with a spinal cord injury.

• Physical Therapy Korea
• /
• v.20 no.2
• /
• pp.52-59
• /
• 2013

The purpose of this study was to determine the reliability and validity of the postural balance program which uses the movement accelerating field principles of posture balance training and evaluation equipment and smartphone movement accelerometer program (SMAP) in healthy young adults. A total of 34 people were appointed as the subject among the healthy young adults. By using Biodex stability system (BSS) and SMAP on the subject, the posture balance capability was evaluated. For the test-retest reliability, SMAP showed the intra-class correlation (ICC: .62~.91) and standard error measurement (SEM: .01~.08). BSS showed the moderate to high reliability of ICC (.88~.93) and SEM (.02~.20). In the reliability of inter-rater, ICC (.59~.73) as to SMAP, showed the reliability of moderate in eyes open stability all (EOSA), eyes open stability anterior posterior (EOSAP), eyes open stability medial lateral (EOSML) and eyes open dinamic all (EODA), eyes open danamic anterior posterior (EODAP), and eyes open danamic medial lateral (EODML). However, ICC showed reliability which was as low as .59 less than in other movements. In addition, BSS showed the reliability of high as ICC (.70~.75). It showed reliability which was as low as ICC (.59 less than) in other movements. In correlation to the balance by attitudes between SMAP and BSS, EOSML (r=.62), EODA (r=.75), EODML (r=.72), ECDAP (r=.64), and ECDML (r=.69) shown differ significantly (p<.05). However, the correlation noted in other movements did not differ significantly. Therefore, SMAP and BSS can be usefully used in the posture balance assessment of the static and dynamic condition with eyes opened and closed.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2022

Purpose : Kinesio taping applied to the ankle varies, and if the overall ankle is taped as much as possible, several effects, including balance, can be expected, but clinically the cost reduction for intervention is very important. Therefore, this study attempted to find out the optimal way to the effect and cost of kinesio taping on ankle dynamic balance. Methods : The subject of this study was 24 university students in their 20s (male: 13, female: 11), who received sufficient explanation of the purpose and method of the study. The Cumberland ankle instability tool (CAIT) questionnaire was used for the degree of ankle instability of the study subjects. If the subject's CAIT score was 28 points or more, it was classified as a stable ankle, and if the score was 24 points or less, it was classified as functional ankle instability (FAI). In this study, Biodex Balance System^® measurement equipment was used to calculate the dynamic balance of study participants. The application of kinesio taping was performed by one physical therapist to attach in the same way, and a method of wrapping the ankle joint was applied in the eight-shaped bandage. Results : The results are as follows in before and after taping of the stable ankle and FAI group. There was no significant difference in the overall, anterior-posterior, and medial-lateral stability index. The comparison is as follows between groups for the differences (post-pre value) in before and after the application of kinesio taping. There were no significant differences between groups in all the overall, anterior-posterior, and medial-lateral stability index. Conclusion : In this study, no significant difference in kinesio taping was found in the dynamic balance of stable ankle and FAI (overall, anterior-posterior, and medial-lateral). It is necessary to continue to study ways to find the maximum effect while minimally attaching them to the application method of ankle kinesio taping.

• Physical Therapy Korea
• /
• v.23 no.1
• /
• pp.87-93
• /
• 2016

Background: Posture balance control is the ability to maintain the body's center of gravity in the minimal postural sway state on a supportive surface. This ability is obtained through a complicated process of sensing the movements of the human body through sensory organs and then integrating the information into the central nervous system and reacting to the musculoskeletal system and the support action of the musculoskeletal system. Motor function, including coordination, motor, and vision, vestibular sense, and sensory function, including proprioception, should act in an integrated way. However, more than half of stroke patients have motor, sensory, cognitive, and emotional disorders for a long time. Motor and sensory disorders cause the greatest difficulty in postural control among stroke patients. Objects: The purpose of this study is to determine the effect of visual and somatosensory information on postural sway in stroke patients and carrying out a kinematic analysis using a tri-axial accelerometer and a quantitative assessment. Methods: Thirty-four subjects posed four stance condition was accepted various sensory information for counterbalance. This experiment referred to the computerized dynamic posturography assessments and was redesigned four condition blocking visual and somatosensory information. To measure the postural sway of the subjects' trunk, a wireless tri-axial accelerometer was used by signal vector magnitude value. Ony-way measure analysis of variance was performed among four condition. Results: There were significant differences when somatosensory information input blocked (p<.05). Conclusion: The sensory significantly affecting the balance ability of stroke patients is somatosensory, and the amount of actual movement of the trunk could be objectively compared and analyzed through quantitative figures using a tri-axial accelerometer for balance ability.

• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.187-195
• /
• 2019

There is a growing emphasis on objective and quantified performance measurement methodologies for the interactions that occur within modern companies. This is due to the importance of establishing and practicing future-oriented strategies by estimating the present value of the company and the current energy status through objective evaluation of the company. Therefore, the selection of KPI as a performance index using BSC (Balance Scorecard), which is a recent objective performance measurement methodology, has become very important. Although many studies on existing KPIs have been made in various industries, KPI studies on SI companies have been insufficient. This study focuses on finding KPIs applicable to SI companies. The study on the KPI design system according to general strategy of SI companies and the development of methodology and evaluation index according to index development for each group were carried out and the weighting methodology according to each evaluation index was presented.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.281-292
• /
• 2003

We setup a continuous measurement system for electrical conductivity of fluid in a model borehole and verified the basic environments in electrical conductivity measurement for estimating hydraulic constants. The experiment was made by monitoring the conductivity change within the hole using NaCI solution of different salinities and incoming formation fluid using distilled water. The experiment was made under the state of constant flow rate by maintaining balance between inflow and outflow. Conductivity variation features were observed by controlling salinity contrasts and temperature differences between fluid within the hole and incoming formation fluid. flow rate and the location of inlet and outlet. The results of the experiment show well the role of each affecting factor on the conductivity distribution. and suggest appropriate environments for conductivity measurements. It is considered that the basis of the conductivity measurement for henceforward laboratory model and/or in-situ borehole experiment has been prepared.