• Journal of Cadastre & Land InformatiX
• /
• v.45 no.2
• /
• pp.117-130
• /
• 2015

A least squares method for adjusting the horizontal network satisfies the conditions which is minimizing the sum of the squares of errors based on probability theory. This research compared accuracy of 3rd cadastral control points adjusted by traditional and least square method with respect to the result of Network-RTK. Test results showed the least square method more evenly distribute closure error than traditional method. Mean errors of least square and traditional adjusting method are 2.7cm, 2.2cm respectively. In addition, blunder in angle observations can be detected by comparing position errors which calculated by forward and backward initial coordinates. However, distance blunder cannot offer specific observation line occurred mistake because distance error propagates several observation lines which have similar directions.

• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.5
• /
• pp.555-563
• /
• 2017

Electrical stimulation through retinal prosthesis elicits both short and long-latency retinal ganglion cell (RGC) spikes. Because the short-latency RGC spike is usually obscured by electrical stimulus artifact, it is very important to isolate spike from stimulus artifact. Previously, we showed that topographic prominence (TP) discriminator based algorithm is valid and useful for artifact subtraction. In this study, we compared the performance of forward backward (FB) filter only vs. TP-adopted FB filter for artifact subtraction. From the extracted retinae of rd1 mice, we recorded RGC spikes with $8{\times}8$ multielectrode array (MEA). The recorded signals were classified into four groups by distances between the stimulation and recording electrodes on MEA (200-400, 400-600, 600-800, $800-1000{\mu}m$). Fifty cathodic phase-$1^{st}$ biphasic current pulses (duration $500{\mu}s$, intensity 5, 10, 20, 30, 40, 50, $60{\mu}A$) were applied at every 1 sec. We compared false positive error and false negative error in FB filter and TP-adopted FB filter. By implementing TP-adopted FB filter, short-latency spike can be detected better regarding sensitivity and specificity for detecting spikes regardless of the strength of stimulus and the distance between stimulus and recording electrodes.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.228-237
• /
• 2003

Eureka-147 DAB(Digital Audio Broadcasting) system on which DMB(Digital Multimedia Broadcasting) system is based, was designed for the requirements of CD qualify audio with ${10}^{-4}$ bit error rate. Audio program may be primary service in DAB system, but multimedia program can be primary service in DMB system. Therefore, the bit error rate required must be below ${10}^{-7}$∼${10}^{-8}$ to transmit multimedia data via DMB channel. In order to meet the requirements and keep backward compatibility of DAB system we propose an outer channel coding scheme using Reed-Solomon coding and convolutional interleaving. This paper shows the simulation results for DMB channel performance based on mobile channel model. Also, it describes the needs and the effects of the outer channel coding.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.1
• /
• pp.32-40
• /
• 2004

This Study was conducted to predict temperature profile of Jangjorim (boiled beef in soy sauce) food during retorting using the commercial NISA (Numerical Integrated Elements for System Analysis) program. NISA program is a good tool to simulate the temperature profile of a specific material based upon the finite element method. The cold point of Jangjorim food located not at the geometrical center but at 26.9 mm backward in y plane because specific heat of soy sauce was 20% higher than that of boiled beef. The effects of heat transfer coefficients on heat transfer during retorting process of Jangjorim were analyzed by response surface methodology (RSM). Independent variables were thermal conductivity of soy sauce, thermal conductivity of boiled beef, and convection heat transfer coefficient and dependent variables were temperature error and lethality error. Thermal conductivity of soy sauce was the most significant contributor among those (P<0.01).

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1197-1199
• /
• 2003

ROCSAT-2 mission is to daily image over Taiwan and the surrounding area for disaster monitoring, land use, and ocean surveillance during the 5-year mission lifetime. The satellite will be launched in December 2003 into its mission orbit, which is selected as a 14 rev/day repetitive Sun-synchronous orbit descending over (120 deg E, 24 deg N) and 9:45 a.m. over the equator with the minimum eccentricity. National Space Program Office (NSPO) is developing a ROCSAT-2 Image Processing System (IPS), which aims to provide real-time high quality image data for ROCSAT-2 mission. A simulated ROCSAT-2 image, based on Level 1B QuickBird Data, is generated for IPS verification. The test image is comprised of one panchromatic data and four multispectral data. The qualification process consists of four procedures: (a) QuickBird image processing, (b) generation of simulated ROCSAT-2 image in Generic Raw Level Data (GERALD) format, (c) ROCSAT-2 image processing, and (d) geometric error analysis. QuickBird standard photogrammetric parameters of a camera that models the imaging and optical system is used to calculate the latitude and longitude of each line and sample. The backward (inverse model) approach is applied to find the relationship between geodetic coordinate system (latitude, longitude) and image coordinate system (line, sample). The bilinear resampling method is used to generate the test image. Ground control points are used to evaluate the error for data processing. The data processing contains various coordinate system transformations using attitude quaternion and orbit elements. Through the qualification test process, it is verified that the IPS is capable of handling high-resolution image data with the accuracy of Level 2 processing within 500 m.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1806-1814
• /
• 1993

Efficient speech coders using tree coding combined with harmonic scaling are designed at the rate of 4.8 kilobitts/sec (kbps). A time domain harmonic scaling algorithm (TDHS) is used to compress input speech by a factor of two. This process allows the tree coder have 1.5 bits/sample for 4.8 kbps in the case of a 6.4 kHz sampling rate. In the backward adaptive tree coder, there are three components of the code generator, including a hybrid adaptive quantizer, a short-term predictor and a pitch predictor. The robustness of the tree coder is achieved by carefully choosing the input of the short term predictor adaptation. Also, inclusion of a smoother in the pitch predictor improves the error performance of tree coder in the noisy channel. Subjectively, tree coding combined with TDHS provides good quality speech at 4.8 kbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.546-552
• /
• 2000

The decoding of Turbo-Code relies on the application of a soft input/soft output decoders which can be realized using maximum-a-posteriori(MAP) symbol estimator[l]. Radix-2 MAP decoder can not be used for high speed communications because of a large number of interleaver block size N. This paper proposed a new simple method for radix-4 MAP decoder based on radix-2 MAP decoder in order to reduce the interleave block size. A branch metrics, forward and backward recursive functions are proposed for applying to radix-4 MAP structure with symbol interleaver. Radix-4 MAP decoder shall be illustratively described and its error performance capability shall be compared to conventional radix-2 MAP decoder in AWGN channel.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.1058-1062
• /
• 2008

In clinical decision support system(CDSS), unlike rule-based expert method, appropriate data-driven machine learning method can easily provide the information of individual feature(clinical test) for disease classification. However, currently developed methods focus on the improvement of the classification accuracy for diagnosis. With the analysis of feature importance in classification, one may infer the novel clinical test sets which highly differentiate the specific diseases or disease states. In this background, we introduce a novel CDSS that integrate a classifier and feature selection module together. Random forest algorithm is applied for the classifier and the feature importance measure. The system selects the significant clinical tests discriminating the diseases by examining the classification error during backward elimination of the features. The superior performance of random forest algorithm in clinical classification was assessed against artificial neural network and decision tree algorithm by using breast cancer, diabetes and heart disease data in UCI Machine Learning Repository. The test with the same data sets shows that the proposed system can successfully select the significant clinical test set for each disease.

• Journal of the Korean Mathematical Society
• /
• v.50 no.5
• /
• pp.1129-1163
• /
• 2013

Based on finite element discretization, two linearization approaches to the defect-correction method for the steady incompressible Navier-Stokes equations are discussed and investigated. By applying $m$ times of Newton and Picard iterations to solve an artificial viscosity stabilized nonlinear Navier-Stokes problem, respectively, and then correcting the solution by solving a linear problem, two linearized defect-correction algorithms are proposed and analyzed. Error estimates with respect to the mesh size $h$, the kinematic viscosity ${\nu}$, the stability factor ${\alpha}$ and the number of nonlinear iterations $m$ for the discrete solution are derived for the linearized one-step defect-correction algorithms. Efficient stopping criteria for the nonlinear iterations are derived. The influence of the linearizations on the accuracy of the approximate solutions are also investigated. Finally, numerical experiments on a problem with known analytical solution, the lid-driven cavity flow, and the flow over a backward-facing step are performed to verify the theoretical results and demonstrate the effectiveness of the proposed defect-correction algorithms.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.188-196
• /
• 2014

This paper describes a simple delay diversity technique for terrestrial digital multimedia broadcasting (T-DMB) and digital audio broadcasting in a single-frequency network (SFN). For the diversity technique, a delay diversity scheme is adopted. In the delay diversity scheme, a non-delayed signal is transmitted in the first antenna, and delayed versions of the signal are transmitted in each additional antenna. For an SFN environment with multiple transmitters, delay diversity can be executed by controlling the emission times of the transmitters. This SFN delay diversity scheme does not require any hardware changes in either the transmitter or receiver, and perfect backward compatibility can be acquired. To evaluate the performance improvement, laboratory tests are executed with various types of commercial T-DMB receivers as well as a measurement receiver. The improvement in the bit error rate performance is evaluated using a measurement receiver, and an improvement of the threshold of visibility value is evaluated for commercial receivers. Test results show that the T-DMB system can obtain diversity gain using the described technique.