• Journal of the Korean earth science society
• /
• v.27 no.6
• /
• pp.643-652
• /
• 2006

Data of the carbon monoxide concentration observed in Mt. Waliguan in China (WLG), Ulaan Uul in Mongolia (UUM), Tae-ahn Peninsula in Korea (TAP), and Ryori in Japan (RYO) were analyzed for a long period between 1991 and 2004. The annual average concentration of carbon monoxide was the highest at TAP $(233{\pm}41ppb)$ followed by $RYO(171{\pm}36ppb),\;UUM(155{\pm}26ppb),\;and\;WLG(135{\pm}22ppb)$. The seasonal variations being high in spring and low in summer were observed in other areas of Eastern Asia except WLG. TAP was high in carbon monoxide concentration in all seasons compared to WLG, UUM and RYO and shows wide distribution of concentration in the histogram, which is caused by the influence of large-scale air pollution due to its downwind location close to the East Asian continent, China in particular. Also, our data was compared with data measured at Mauna Loa (MLO) in Hawaii. According to the origin of the isentropic backward trajectory and its transport passage, carbon monoxide concentration observed in TAP was analyzed as follows: continental background airflows (CBG) were $216{\pm}47ppb$; regionally polluted continental airflows (RPC) were $316{\pm}56ppb$; Oceanic background airflows (OBG) were $108{\pm}41ppb$; and Partly perturbed oceanic airflows (PPO) were $161{\pm}6ppb$. The high concentration of carbon monoxide in TAP is due to the airflow from East Asian continent origin rather than that from the North Pacific origin. Especially, RPC which passes through the eastern China appeared to be the highest in concentration in spring, fall, and winter. However, OBG was affected by the North Pacific air mass with a low carbon monoxide concentration in summer. The NOAA satellite images and GEOS-CHEM model simulation confirmed a large-scale air pollution event that was in the course of expansion from southeastern China bound to the Korean Peninsula and the Korea East Sea by way of the Yellow Sea.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.291-298
• /
• 2015

An array type probe for monitoring metal tubes is proposed in this paper which utilizes peak value and peak time of a pulsed eddy current(PEC) signal. The probe consists of an array of encircling coils along a tube and the outside of coils is shielded by ferrite to prevent source magnetic fields from directly affecting sensor signals since it is the magnetic fields produced by eddy currents that reflect the condition of metal tubes. The positions of both exciter and sensor coils are consecutively moved automatically so that manual scanning is not necessary. At one position of send-receive coils, peak value and peak time are extracted from a sensor PEC signal and these data are accumulated for all positions to form an array type peak value signal and an array type peak time signal. Numerical simulation was performed using the backward difference method in time and the finite element method for spatial analysis. Simulation results showed that peak value increases and the peak appears earlier as the defect depth or length increases. The proposed array signals are shown to be excellent in reflecting the defect location as well as variations of defect depth and length within the array probe.

• Journal of The Korean Association For Science Education
• /
• v.32 no.4
• /
• pp.671-685
• /
• 2012

In this study, we developed an analogical experimental design strategy emphasizing understanding and checking stages and applied it to four groups consisting of 7th grade science-gifted students. We classified the patterns of experimental design processes and analyzed the verbal interactions among the science-gifted students at the levels of turn and interaction unit. The analyses of the results reveled that three groups were relevant to reinitiated motion and the other to backward-divergent motion. In the analyses of turn and interaction unit, the frequencies of the statements related to the task were high, especially 'making suggestion' and 'elaborated symmetrical interaction'. The analyses for each stage of strategy indicated that the frequencies of 'explain', 'question', and 'cumulative interaction' at understanding stage were high. At designing stage, the frequencies of 'making suggestion', 'cumulative interaction', and 'disputative interaction' were found to be high. At checking stage, 'making suggestion', 'receiving opinion', and 'disputative interaction' were high. In the comparison of the patterns, the qualitative differences among interaction unit were found at all the stages, whereas there were differences only between designing and checking stages in the turn cases. Educational implications of these findings are discussed.

• Atmosphere
• /
• v.18 no.4
• /
• pp.287-297
• /
• 2008

The vertical profiles and optical properties of Asian dust are investigated using ground-based measurements from 1998 to 2002. Vertical profiles of aerosol extinction coefficient are evaluated using MPL (Micro Pulse Lidar) data. Optical parameters such as aerosol optical thickness ($\tau$), ${\AA}ngstr\ddot{o}m$ exponent ($\alpha$), single scattering albedo ($\omega$), refractive index, and volume size distribution are analyzed with sun/sky radiometer data for the same period. We can separate aerosol vertical profiles into three categories. First category named as 'Asian dust case', which aerosol extinction coefficient is larger than $0.15km^{-1}$ and dust layer exists from surface up to 3-4km. Second category named as 'Elevated aerosol case', which aerosol layer exists between 2 and 6km with 1-2.5km thickness, and extinction coefficient is smaller than $0.15km^{-1}$. Third category named as 'Clear sky case', which aerosol extinction coefficient appears smaller than $0.15km^{-1}$. and shows that diurnal variation of background aerosol in urban area. While optical parameters for first category indicate that $\tau$ and $\alpha$ are $0.63{\pm}0.14$, $0.48{\pm}0.19$, respectively. Also, aerosol volume concentration is increased for range of 1 and $4{\mu}m$, in coarse mode. Optical parameters for second category can be separated into two different types. Optical properties of first type are very close to Asian dust cases. Also, dust reports of source region and backward trajectory analyses assure that these type is much related with Asian dust event. However, optical properties of the other type are similar to those of urban aerosol. For clear sky case, $\tau$ is relatively smaller and $\alpha$ is larger compare with other cases. Each case shows distinct characteristics in aerosol optical parameters.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.14 no.1
• /
• pp.141-152
• /
• 1984

The author analysed the bone changes, the positional relationships between condylar head and articular fossa, and the interrelationship between the bone changes and the abnormal position of condylar head, from 1,036 radiographs of 259 patients with temporomandibular joint arthrosis, which were obtained by the oblique-lateral transcranial projection and orthopantomograms. The results were as follows: 1. Among the radiographic bone changes of the temporomandibular joint arthrosis, deformity was 36.90%(217 case), sclerosis 34.18% (20 cases), errosive chang 25.85% (152 cases) and marginal proliferation 3.06% (18 cases) respectively. 2. In the positional changes between condylar head and articular fossa, the downward positioning of condylar head in centric occlusion was most frequent(36.90%), of which frequency was signifiantly higher than forward positioning (11.22%) and backward positioning(4.76%) in same condition. Also, radiographs showed that the enlargement of articular space showed higher frequency than its narrowing. In the opening position of mouth, the restricted movement of condylar head within articular fossa was most frequent(35.03%). The forward positioning and the downward positioning was 15.65% and 9.52% respectively. Also, radiographs revealed that the incomplete movement or no positional change of condylar head was most frequent. 3. In the interrelationship between bone changes and abnormal position of condylar head, deformity was 42.79% in the cases of downward positioning of condylar head in centric occlusion and 37.50% in those of normal positioning of condylar head in same condition. This revealed that deformity was most frequent bone change in above condylar positionings. However, erossive change was 34.62% in the cases of downward positioning of condylar head in centric occlusion and 33.33% in those of forward positioning. In opening position of condylar head, and deformity in the cases of normal positioning, forward positioning and downward positioning of condylar head was 38.38%, 36.96% and 44.64% respectively. 4. Bone changes of condylar head was 47.11%, articular eminence 41.50% and articular fossa 11.39% respectively. This revealed that the frequencies of bone changes. were higher in the projected portion of bony structures of temporomandibular joint than their depressed portions. On the otherhand, in the bone changes of condylar head, deformity was 59.57% which was the most frequent. In the bone changes of articular eminence and articular fossa, however, sclersis was 41.39% and 65.67% respectively, which was the most frequent in those portions.

• Atmosphere
• /
• v.27 no.2
• /
• pp.225-233
• /
• 2017

Korea has recently suffered from severe hazes, largely being long-range transported from China but frequently mixed with domestic pollution. It is important to identify the origin of the frequently-occurring hazes, which is however hard to clearly determine in a quantitative term. In this regard, we suggest a possible classification procedure of various hazes into long-range transported haze (LH), Yellow Sand (YS), and urban haze (UH), based on mass loading of fine particles, time lag of PM mass concentrations between two sites aligned with dominant wind direction, backward trajectory of air mass, and the mass ratio of PM2.5 to PM10. The analysis sites are Seoul (SL) and Baengnyeongdo (BN), which are distant about 200 km from each other in the west to east direction. Aerosol concentrations at BN are overall lower than those of SL, indicative of BN being a background site for SL. We found distinct time lag of PM2.5 and PM10 concentrations between BN and SL in case of both LH and YS, but the intensity of YS being stronger than LH. Time scale (e-folding time scale) of LH appears to be longer and more variable than YS, which implies that LH covers much larger spatial scale. In addition, we found linear and significant correlations between ${\tau}_a$ obtained from sunphotometer and ${\tau}_{cal}$ calculated from surface aerosol scattering coefficient for LH episodes, relative to few correlation between those for YS, which might be associated with transported height of YS being much higher than LH. Therefore surface PM concentrations for the YS period are thought to be not representative for vertical integrated amount of aerosol loadings, probably by virtue of decoupled structure of aerosol vertical distribution. Improvement of various hazes classification based on the current result would provide the public as well as researchers with more accurate information of LH, UH, and YS, in terms of temporal scale, size, vertical distribution of aerosols, etc.

• Korean Business Review
• /
• v.19 no.2
• /
• pp.183-206
• /
• 2006

Recently, the notion of "increasing returns" has been popular not only in academia but also in industries. This notion has been drawn from prior research on network effects, which showed that the market evolution would lock in to a dominant technology. However, the long history of technological change has rarely shown the possibility of lock-in to an inferior technology. How could the market with network effects make transition between incompatible technologies regimes by escaping the lock-in? This paper analyzes the effectiveness of R&D and technological choice to investigate the sources of the dynamic capabilities in the presence of network effects and uncertain technological progress. Why does the market sometimes work against a radical technology, and why, at other times, does the market operate in favor of it? This study is to address this question by modeling the situation of two competing technologies in the presence of network effects. The numerical analysis indicates that the evolution strategy of compatibility is more likely to increase the chance of firm growth when a majority of customers are not power users or when demand for an old technology has been escalated. But when there are a substantial number of power users or when a new technology emerges before such an escalation of demand, the revolution strategy of compelling performance is more likely to be effective. The result suggests a potential mechanism for overcoming the lock-in problem. When the market exhibits some inertia to an obsolete technology, which is reinforced by the increasing customer value with respect to backward compatibility, the survival of a new technology depends on power users. When many power users are cultivated by firms' technological efforts regarding the new technology, the market is less likely to lock into an obsolete technology. Indeed, in the workstation market, where power users characterize much of the demand, innovators like Sun successfully switched to the RISC architecture.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.24-31
• /
• 1996

In this paper, we present a speech translation system for hotel reservation, KT_STS(Korea Telecom Speech Translation System). KT-STS is a speech-to-speech translation system which translates a spoken utterance in Korean into one in Japanese. The system has been designed around the task of hotel reservation(dialogues between a Korean customer and a hotel reservation de나 in Japan). It consists of a Korean speech recognition system, a Korean-to-Japanese machine translation system and a korean speech synthesis system. The Korean speech recognition system is an HMM(Hidden Markov model)-based speaker-independent, continuous speech recognizer which can recognize about 300 word vocabularies. Bigram language model is used as a forward language model and dependency grammar is used for a backward language model. For machine translation, we use dependency grammar and direct transfer method. And Korean speech synthesizer uses the demiphones as a synthesis unit and the method of periodic waveform analysis and reallocation. KT-STS runs in nearly real time on the SPARC20 workstation with one TMS320C30 DSP board. We have achieved the word recognition rate of 94. 68% and the sentence recognition rate of 82.42% after the speech recognition tests. On Korean-to-Japanese translation tests, we achieved translation success rate of 100%. We had an international joint experiment in which our system was connected with another system developed by KDD in Japan using the leased line.

• The Journal of Korean society of community based occupational therapy
• /
• v.7 no.1
• /
• pp.49-57
• /
• 2017

Objective : The purpose of this study to create a translation of Life Space Assessment(LSA) for elderly, which was then tested for content related validity and understanding test. Methods : The translation and content validation process involved direct and backward translation, and the collection of content-related evidence from 6 expert panels and 13 clinician panels. A content validity indices (CVI), means, and standard deviations were used for the analysis of the content validity. Results : The results of the comparison between the original LSA and the Korean LSA with the expert panels were I-CVI showed a very high value of .93. and 1.00, and S-CVI/Ave 0.99. The results of the understanding test were showed a very high value of .92 and 1.00, and S-CVI/Ave 0.97. Conclusion : Korean LSA showed content related validity and understanding test, and illustrated the applicability of LSA in a Korean clinical setting. The results showed LSA can be used a useful tool for evaluating the community mobility of elderly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.55-63
• /
• 2017

Due to spatial problems and system size,conventional measurement methods used to acquire the information needed for existing electrical energy and management have been limited to new buildings or areas where replacement is possible. This electric load management method is problematic when applying it to energy and safety management of vulnerable areas or existing homes or offices. The problem with installing a measurement module in every branch is that the system is too large. Even if the measurement module is installed, the type of load is not recognized, and efficient management is not performed. In particular, it is very difficult to apply it to traditional markets and backward facilities in Korea. In this paper, we apply NIALM technology and arc detection technology to solve these problems and verify the feasibility of NIALM for normal arc generation. Also, based on the verification results, we propose a new smart home safety management system that can effectively manage electrical safety and that can be applied to conventional market and existing home safety management systems. The proposed system conducts a comparative performance test with an existing safety management system. In addition, it achieves 95% or more load recognition for four loads, which is impossible in 40% of the existing systems, and the arc detection function was confirmed.