• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.157-161
• /
• 2008

A wavelength-selective reflector, composed of a double-ring-resonator add/drop filter and a loop-back mirror at the drop port to be used for a hybrid-integrated tunable laser is designed and fabricated. High-index-contrast polymer waveguide is used to realize a compact device as small as $2mm{\times}0.4mm$. The radii of the rings are slightly different from each other to obtain a wide wavelength tuning via a vernier effect. Peak reflectivity is measured to be 52% for TE mode and polarization-dependent wavelength shift is 0.95 nm. The tuning range is measured to be about 42 nm for applied current as small as 46 mA.

• Korean Journal of Materials Research
• /
• v.20 no.10
• /
• pp.501-507
• /
• 2010

Changes in surface morphology and roughness of dc sputtered ZnO:Al/Ag back reflectors by varying the deposition temperature and their influence on the performance of flexible silicon thin film solar cells were systematically investigated. By increasing the deposition temperature from $25^{\circ}C$ to $500^{\circ}C$, the grain size of Ag thin films increased from 100 nm to 1000 nm and the grain size distribution became irregular, which resulted in an increment of surface roughness from 6.6 nm to 46.6 nm. Even after the 100 nm thick ZnO:Al film deposition, the surface morphology and roughness of the ZnO:Al/Ag double structured back reflectors were the same as those of the Ag layers, meaning that the ZnO:Al films were deposited conformally on the Ag films without unnecessary changes in the surfacefeatures. The diffused reflectance of the back reflectors improved significantly with the increasing grain size and surface roughness of the Ag films, and in particular, an enhanced diffused reflectance in the long wavelength over 800 nm was observed in the Ag back reflectors deposited at $500^{\circ}C$, which had an irregular grain size distribution of 200-1000 nm and large surface roughness. The improved light scattering properties on the rough ZnO:Al/Ag back reflector surfaces led to an increase of light trapping in the solar cells, and this resulted in a noticeable improvement in the $J_{sc}$ values from 9.94 mA/$cm^2$ for the flat Ag back reflector at $25^{\circ}C$ to 13.36 mA/$cm^2$ for the rough one at $500^{\circ}C$. A conversion efficiency of 7.60% ($V_{oc}$ = 0.93, $J_{sc}$ = 13.36 mA/$cm^2$, FF = 61%) was achieved in the flexible silicon thin film solar cells at this moment.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1780-1785
• /
• 2015

In this paper, the adaptive particle swarm optimization (APSO) algorithm is employed to design a gain-enhanced antenna with a reflector for energy harvesting. We placed the reflector below the main radiating element. Its back-radiated field is reflected and added to the forward radiated field, which could increase the antenna gain. We adopt the adaptive particle swarm optimization (APSO) algorithm, which improves the speed of convergence with a high frequency solver. The result shows that performance of the optimized design successfully satisfied the design goal of the frequency band, gain and axial ratio.

• Current Photovoltaic Research
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2016

Among the various types of solar cells, silicon based two terminal tandem solar cell is one of the most popular one. It is designed to split the absorption of incident AM1.5 solar radiation among two of its component cells, thereby widening the wavelength range of external quantum efficiency (EQE) spectra of the device, in comparison to that of a single junction solar cell. In order to improve the EQE spectra further and raise short circuit current density ($J_{sc}$) an optimization of the tradeoff between the top and bottom cell is needed. In an optimized cell structure, the $J_{sc}$ and hence efficiency of the device can further be enhanced with the help of light trapping scheme. This can be achieved by texturing front and back surface as well as a back reflector of the device. In this brief review we highlight the development of light trapping in the silicon based tandem solar cell.

• Korean Journal of Materials Research
• /
• v.21 no.10
• /
• pp.573-579
• /
• 2011

Highly textured Ag, Al and Al:Si back reflectors for flexible n-i-p silicon thin-film solar cells were prepared on 100-${\mu}m$-thick stainless steel substrates by DC magnetron sputtering and the influence of their surface textures on the light-scattering properties were investigated. The surface texture of the metal back reflectors was influenced by the increased grain size and by the bimodal distribution that arose due to the abnormal grain growth at elevated deposition temperatures. This can be explained by the structure zone model (SZM). With an increase in the deposition temperatures from room temperature to $500^{\circ}C$, the surface roughness of the Al:Si films increased from 11 nm to 95 nm, whereas that of the pure Ag films increased from 6 nm to 47 nm at the same deposition temperature. Although Al:Si back reflectors with larger surface feature dimensions than pure Ag can be fabricated at lower deposition temperatures due to the lower melting point and the Si impurity drag effect, they show poor total and diffuse reflectance, resulting from the low reflectivity and reflection loss on the textured surface. For a further improvement of the light-trapping efficiency in solar cells, a new type of back reflector consisting of Ag/Al:Si bilayer is suggested. The surface morphology and reflectance of this reflector are closely dependent on the Al:Si bottom layer and the Ag top layer. The relationship between the surface topography and the light-scattering properties of the bilayer back reflectors is also reported in this paper.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.327-328
• /
• 2008

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.374-377
• /
• 2008

비정질 Si박막 태양전지의 후면 반사층을 위한 ZnO:Al TCO박막을 RF Magnetron Sputtering 방법으로 증착하였으며 이의 전기적, 광학적 특성 및 구조를 최적화하였다. Sputtering의 공정변수인 증착 RF 파워, 기판온도, 타겟-기판 거리, 증착압력을 변화시켜 ZnO:Al 단일막의 전기적, 광학적 특성을 최적화 하였고,이를 소면적 태양전지 셀 및 모듈에 적용하였다.그 중 증착 RF파워 및 압력이 단일막의 전기적,광학적 특성에 타겟-기판거리는 박막의 균일도에 큰 영향을 주었다. 압력에 따른 박막의 치밀도를 SE EMA방법으로 정량화하였고, 광학적, 전기적 특성과 연관하여 해석하였다. ZnO:Al 박막의 물성을 최적화하여 태양전지 셀에 적용한 결과 두께 80nm에서 가장 큰 Jsc의 증가를 보였고, 적용 전에 비해 약 18%의 광변환효율의 증가를 얻었다. 최적화된 태양전지 셀의 광변환효율은 9.9%, 모듈 효율은 7.4%였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.2
• /
• pp.115-118
• /
• 2017

Highly photosensitive and wide bandgap amorphous silicon oxide (a-$SiO_x$:H) films were developed at low temperature ranges ($100{\sim}150^{\circ}C$) with employing plasma-enhanced chemical vapor deposition by optimizing $H_2/SiH_4$ gas ratio and $CO_2$ flow. Photosensitivity more than $10^5$ and wide bandgap (1.81~1.85 eV) properties were used for making the a-$SiO_x$:H thin film solar cells, which exhibited a high open circuit voltage of 0.987 V at the substrate temperature of $100^{\circ}C$. In addition, a power conversion efficiency of 6.87% for the cell could be improved up to 7.77% by employing a new n-type nc-$SiO_x$:H/ZnO:Al/Ag triple back-reflector that offers better short circuit currents in the thin film photovoltaic devices.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.3
• /
• pp.152-155
• /
• 2013

In this paper, the reduction of the figure of merit depending on the increased spill-over when the parabolic reflector is cut off partially for low-profile configuration in the satellite broadcast receiving antenna is analyzed. Also for the accurate analysis and simulation, it is considered that the noise temperature is increased due to the effect of ground thermal noise toword the sidelobes and back lobes when the antenna is tracked from $0^{\circ}$ to $60^{\circ}$ in elevation angle, and that the total noise temperature is increased because to the noise figure of LNA. As the results, noise temperature is increased up to about 15K and G/T ratio is decreased to about 2.5dB, when the reflector is cut 35% off partially.

• Journal of the Korean Home Economics Association
• /
• v.44 no.2 s.216
• /
• pp.93-101
• /
• 2006

Children's wear needs extra safety features to avoid unexpected dangers. On the way to school, children are exposed to traffic very often. Especially in the early morning or late evening, or on dark cloudy days, they might be unrecognized by drivers without safety reflectors on their clothing as a means of raising visibility. Therefore, safety reflectors on clothing can protect children from traffic accidents. The research was carried out as follows. 1. Reflector manufacturers were interviewed regarding how Reflective and Reflexite reflect light back to the light source, what kind of safety reflector products are available, and how these materials are being used in the clothing industry. 2. Mothers of primary school children were interviewed to find out what they think about the effect of safety reflectors, the need for clothing using safety reflectors and the design preferences. 3. In order to apply safety reflectors efficiently, the position on the clothing of the greatest visibility from the light source must be determined. 4. Shirts, pants and jumpers for 8-year-old girls and boys were designed as a case study of applying safety reflectors to clothing. The designs were verified through wearing test.