• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.619-623
• /
• 1993

In this paper, a neural network is appled to design a lateral autopilot for airplanes. Linearized lateral dynamics is used in training the neural network controller and verifying the performance as well. To train the neural network, back propagation algorithm is used. In this training, no information about the dynamics to be controlled except sign and rough magnitude of control derivatives is needed. It is shown by computer simulations that the performance and stability margin are satisfactory.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권1호
• /
• pp.15-19
• /
• 2002

Automatic detection of interstitial lung disease using Neural Network is presented. The rounded opacities in the pneumoconiosis X-ray photo are picked up quickly by a back propagation (BP) neural network with several typical training patterns. The training patterns from 0.6 mm ${\O}$ to 4.0 mm ${\O}$ are made by simple circles. The total evaluation is done from the size and figure categorization. Mary simulation examples show that the proposed method gives much reliable result than traditional ones.

• 전자공학회논문지B
• /
• 제30B권8호
• /
• pp.71-75
• /
• 1993

This paper presents a neural network IC for Korean vowels recognition. The neural network is composed with three levels and which is learned by Back Propagation algorithm. In the neural network IC, the neuron bodys and synapses are implemented with CMOS inverters and ion-implanted polysilicon resistors.

• 대한의용생체공학회:의공학회지
• /
• 제12권3호
• /
• pp.191-202
• /
• 1991

This paper describes ECG data compression algorithm using neural network. As a learning method, we use back error propagation algorithm. ECG data compression is performed using learning ability of neural network. CSE database, which is sampled 12bit digitized at 500samp1e/sec, is selected as a input signal. In order to reduce unit number of input layer, we modify sampling ratio 250samples/sec in QRS complex, 125samples/sec in P & T wave respectively. hs a input pattern of neural network, from 35 points backward to 45 points forward sample Points of R peak are used.

• 전자공학회논문지B
• /
• 제29B권1호
• /
• pp.58-66
• /
• 1992

This paper proposes a neuro-controller for position control of one-link flexible robot arm. Basically the controller consists of a multi-layer neural network and a conventional PD controller. Two controller are parallelly connected. Neural network is traind by the conventional error back propagation learning rules. During learning period, the weights of neural network are adjusted to minimize the position error between the desired hub angle and the actual one. Finally the effectiveness of the proposed approach will be demonstrated by computer simulation.

• 한국정보통신학회논문지
• /
• 제7권8호
• /
• pp.1743-1750
• /
• 2003

근래에는 정확성과 신뢰성이 강한 센서리스 속도추정방법으로 전동기를 구동하기 위한 노력이 전개되고 있으며, 본 논문은 외란에 대한 강인성이 뛰어난 신경회로망을 이용하여 직류전동기의 센서리스 속도제어를 실현한 연구 결과이다. 〔6­8〕 신경회로망은 사람의 뇌가 경험을 통해 학습하듯이 주어진 입력에 대해 학습을 통하여 최적의 출력을 발생한다. 학습은 직류전동기의 수식모델을 통해 얻어진 전압$.$전류 및 회전자 속도를 입$.$출력 데이터로 사용하여 역전파 학습 알고리즘〔8〕을 통해 행하여지며, 학습 완료 후 얻은 최적의 연결강도를 이용하여 속도를 추정한다. 신경회로망에 의한 방식은 복잡한 알고리즘을 사용하지 않고도 정확한 속도 추정이 가능하며, 직류전동기의 문제점인 회전자 권선의 열에 의한 전동기의 성능 악화 및 속도 제어의 어려움을 해소하여 운전 조건에 따른 외란 등에도 강인한 제어 특성을 가질 뿐만 아니라 전 속도 영역에서 속도 응답 특성이 우수한 결과를 얻을 수 있었다.

• 한국CDE학회논문집
• /
• 제18권4호
• /
• pp.275-282
• /
• 2013

This paper proposes a method for human identification using teeth contours extracted from dental images that are captured from the frontal views of subjects each of who opens his or her mouth slightly. Each dental image has a black-colored region containing the subject's teeth contours which are usually different from subject to subject. This means that this black-colored region has bio-mimetic information useful for human identification. The basic idea of the method is to extract the upper and lower teeth contours from the dental image of each subject and to encode their geometric patterns using a back-propagation neural network model. After acquiring 400 teeth images form 10 university students, we used 300 images for the training data of the neural network model and 100 images for its verification. Experimental results have shown that the proposed neural network-based method can be used as an alternative solution for identification among a small group of humans with a low cost and simple setup.

• 경영과학
• /
• 제29권3호
• /
• pp.81-89
• /
• 2012

Since introduced by Vining and Myers in 1990, the concept of dual response approach based on response surface methodology has widely been investigated and adopted for the purpose of robust design. Separately estimating mean and variance responses, dual response approach may take advantages of optimization modeling for finding optimum settings of input factors. Explicitly assuming functional relationship between responses and input factors, however, it may not work well enough especially when the behavior of responses are poorly represented. A sufficient number of experimentations are required to improve the precision of estimations. This study proposes an alternative to dual response approach in which additional experiments are not required. An artificial neural network has been applied to model relationships between responses and input factors. Mean and variance responses correspond to output nodes while input factors are used for input nodes. Training, validating, and testing a neural network with empirical process data, an artificial data based on the neural network may be generated and used to estimate response functions without performing real experimentations. A drug formulation example from pharmaceutical industry has been investigated to demonstrate the procedures and applicability of the proposed approach.

• 한국음향학회지
• /
• 제14권1호
• /
• pp.13-21
• /
• 1995

본 논문에서는 신경망 학습에 의한 영상분류 알고리즘을 개선하였으며, 이것은 입력패턴 생성부와 분류을 위한 역전파 알고리즘에 의한 광역신경망으로 구성된다. 입력패턴을 위한 특징값으로는 자기조직화 형상지도 학습에 의해 얻은 코드북 데이타를 특징벡터로 이용한다. 이것은 입력벡터로서 원영상에 충실하면서 입력 뉴런수를 감소시킨다. 분류기에 사용된 광역망 알고리즘은 가중치와 유니트 오프셋 제어가 가능하도록 역전파 알고리즘에 제어부와 어드레스 메모리부를 삽입하였다. 실험결과 이들 분류기는 학습시 국소최소점에 빠지지 않게 되며, 대규모 신경망을 구현하고자 할 때 망구조를 간단히 할 수 있다. 또한 이것은 동작속도를 크게 개선할 수 있다.

• International Journal of Control, Automation, and Systems
• /
• 제6권3호
• /
• pp.453-459
• /
• 2008

The neural network is currently being used throughout numerous control system fields. However, it is not easy to obtain an input-output pattern when the neural network is used for the system of a single feedback controller and it is difficult to obtain satisfactory performance with when the load changes rapidly or disturbance is applied. To resolve these problems, this paper proposes a new mode to implement a neural network controller by installing a real object for control and an algorithm for this, which can replace the existing method of implementing a neural network controller by utilizing activation function at the output node. The real plant object for controlling of this mode implements a simple neural network controller replacing the activation function and provides the error back propagation path to calculate the error at the output node. As the controller is designed using a simple structure neural network, the input-output pattern problem is solved naturally and real-time learning becomes possible through the general error back propagation algorithm. The new algorithm applied neural network controller gives excellent performance for initial and tracking response and shows a robust performance for rapid load change and disturbance, in which the permissible error surpasses the range border. The effect of the proposed control algorithm was verified in a test that controlled the speed of a motor equipped with a high speed computing capable DSP on which the proposed algorithm was loaded.