• Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.353-359
• /
• 2012

Age and growth of Hemibarbus labeo caught from Goe-san Lake in South Korea from March to November, 2011, were studied. A total of 201 specimens was collected, ranging from 110 to 580 mm in total length (TL). Males and females made up 47.9% and 52.1% of the sample, respectively. Marginal increment analyses showed that vertebral increments, each composed of one opaque and one hyaline zone, were deposited annually. Opaque edges were prevalent from June to July. The relationship between TL and vertebral radius was linear, with equations of R = 0.008TL - 0.208 (male) and R = 0.009TL - 0.272 (female). Regression equations between TL and total weight (TW) were $TW=9{\times}10^{-6}TL^{2.987}$ (male), $TW=8{\times}10^{-6}TL^{3.014}$ (female), and $TW=9{\times}10^{-6}TL^{2.988}$ (combined sexes), according to the von Bertalanffy growth equation. Back-calculated TL was expressed using the von Bertalanffy equation as follows: $L_t=438.25(1-e^{-0.175(t+0.164)})$ for males, $L_t=483.36(1-e^{-0.147(t+0.115)})$ for females, and $L_t=464.86(1-e^{-0.162(t+0.176)})$ for the sexes combined. The growth performances were 4.526, 4.536, and 4.544, respectively.

• Transactions of Materials Processing
• /
• v.29 no.3
• /
• pp.163-171
• /
• 2020

We present a multi-step cold drawing for a non-equiatomic Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ high entropy alloy (HEA) with a simple face-centered cubic (FCC) crystal structure. The distribution of strain in the cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wires was analyzed by the finite element method (FEM). The effective strain was expected to be higher as it was closer to the surface of the wire. However, the reverse shear strain acted to cause a transition in the shear strain behavior. The critical effective strain at which the shear strain transition behavior is completely shifted was predicted to be 4.75. Severely cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wires up to 96% of the maximum cross-sectional reduction ratio were successfully manufactured without breakage. With the assistance of electron back-scattering diffraction and transmission electron microscope analyses, the abundant deformation twins were found in the region of high effective strain, which is a major strengthening mechanism for the cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wire.

• Journal of dental hygiene science
• /
• v.20 no.2
• /
• pp.97-106
• /
• 2020

Background: In Korea, laws for many medical technicians were revised in the Enforcement Decree of the Medical Technicians Act (MTA), which was announced on December 2018, whereas those related to dental hygienists remained unchanged. This study aimed to determine the awareness and opinions of dental hygienists regarding MTA. Methods: Dental hygienist were recruited as participants via convenient sampling in Seoul, Gyeonggi-do, and Chungcheong-do; data from 291 self-reported questionnaire responses were used for the final analysis. We investigated the participants' general characteristics, awareness, and request for the amendment of the MTA. The compliance with the work scope specified in the MTA and level of demand for revision of the MTA were analyzed by independent t-test and one-way analysis of variance. For all statistical analyses, the significance level was set at 0.05. Results: For the 2018 MTA revision, 99 (34.02%) knew that dental treatment assistance and surgery assistance were excluded, whereas 192 (65.98%) did not know. The item "The current medical technician law must be revised" was scored 4.13±0.80 out of 5 points, and significant differences were identified according to the education level, career, and position (p<0.05). The item "It is necessary to institutionalize the expanded work scope beyond the work scope of dental hygienists specified in the MTA" was scored 4.02±1.04 out of 5 points, and significant differences were identified according to age (p<0.05). Conclusion: The participants wanted the MTA to be revised to reflect the real-world work performed by dental hygienists in the dental clinical field. The legal system must ensure the legal protection of the work area of the dental hygienist as an oral health professional, and recognize the legal work scope of the dental hygienist.

• Geomechanics and Engineering
• /
• v.19 no.6
• /
• pp.499-511
• /
• 2019

The reliability of reinforced concrete structures is frequently compromised by the deterioration caused by reinforcement corrosion. Evaluating the effect caused by reinforcement corrosion on structural behaviour of corrosion damaged concrete structures is essential for effective and reliable infrastructure management. In lifecycle management of corrosion affected reinforced concrete structures, it is difficult to correctly assess the lifecycle performance due to the uncertainties associated with structural resistance deterioration. This paper presents a stochastic deterioration modelling approach to evaluate the performance deterioration of corroded concrete structures during their service life. The flexural strength deterioration is analytically predicted on the basis of bond strength evolution caused by reinforcement corrosion, which is examined by the experimental and field data available. An assessment criterion is defined to evaluate the flexural strength deterioration for the time-dependent reliability analysis. The results from the worked examples show that the proposed approach is capable of evaluating the structural reliability of corrosion damaged concrete structures.

• Korean Journal of Agricultural Science
• /
• v.15 no.2
• /
• pp.164-173
• /
• 1988

This study is to analyse marketing and industrial structure of meat processing industry and to examine it's current situation related to agriculture. For this purpose 1. This paper surveys the history of meat processing industry, and analyses current situation of meat processing industry, based upon economic statistic data. 2. For the research of marketing structure of meat processing products, this paper not only ciassifies into three catagories; the supply of raw meat, main marketing organization, and path, but measures magnitude of Marketing Bill and Farmer's Share practically through statistic data and an on-the-spot survey. 3. This study also attempt to explain the relation of meat processing industry and the other industry and role of meat processing industry is Korean economy by the use of input-output table. The results of the study are as follows; 1. The meat processing industry in Korea produces low quality, and expensive raw meat with limited quality, inefficiency of marketing structure, and unrelated livestock and meat processing industry. 2. Korea market structure of meat processing products has been changed into oligopoly from monopoly by a new corporation entered into monopoly and the size of meat processing market firms has been normalized. 3. Meat processing industry is very important considering with its high back-linkage-effect. In order to develop meat processing industry and marketing, it is essential that operation of intergrated meat market center, meat market center should be efficiently operated. The efficient utilization of domestic resource for raw meat and development of processing technique have to be required, by means of the governmental support.

• The Journal of Engineering Geology
• /
• v.30 no.1
• /
• pp.85-101
• /
• 2020

The estimation of strength parameters is very important for the stability analysis of rock slopes. Various methods for the determination of strength parameters were suggested by various researchers. The number of methods used for the estimation of strength parameters in the stability analysis of rock slopes were investigated based on literature reviews. The frequency of the method determining strength parameters were investigated with respect to failure types. The cohesion and friction angles of the rock and discontinuities are presented with RMR values. The cohesion shows wider range of values relative to those of friction angles according to current studies. Even though RMR does not show any correlation with cohesion values, RMR and the friction angle of the rock clearly shows a positive relationship. Proper methods should be utilized for the determination of strength parameters with consideration for failure types and be proved through literature reviews. The credibility of determining strength parameters is expected to improve if strength parameters data are accumulated from the back analysis performed for failed local rock slopes.

• Animal Systematics, Evolution and Diversity
• /
• v.28 no.4
• /
• pp.279-290
• /
• 2012

Plecoglossus altivelis (ayu) is an amphidromous fish widely distributed in Northeastern Asia from the East China Sea to the northern Japanese coastal waters, encompassing the Korean Peninsula within its range. The shore lines of northeastern region in Asia have severely fluctuated following glaciations in the Quaternary. In the present study, we investigate the population genetic structure and historical demographic change of P. altivelis at a population level in East Asia. Analysis of molecular variance (AMOVA) based on 244 mitochondrial control region DNA sequences clearly showed that as the sampling scope extended to a larger geographic area, genetic differentiation began to become significant, particularly among Northeastern populations. A series of hierarchical AMOVA could detect the genetic relationship of three closely located islands between Korea and Japan that might have been tightly connected by the regional Tsushima current. Neutrality and mismatch distribution analyses revealed a strong signature of a recent population expansion of P. altivelis in East Asia, estimated at 126 to 391 thousand years ago during the late Pleistocene. Therefore it suggests that the present population of P. altivelis traces back to its approximate demographic change long before the last glacial maximum. This contrasts our a priori expectation that the most recent glacial event might have the most crucial effect on the present day demography of marine organisms through bottleneck and subsequent increase of effective population size in this region.

• Journal of the Korean Society of Costume
• /
• v.57 no.10
• /
• pp.74-86
• /
• 2007

An empirical study was conducted on fashion cultural products, targeting foreigners from diverse cultures. Its purpose was to identify foreigners' attitudes toward fashion cultural products of which design sources were derived from the Korean culture. The quantitative research using questionnaires was targeted at Americans, Chinese and Japanese who visited Korea. The questionnaires were back-translated into different languages for completion by the test subjects. Out of a total of 424 surveys returned, 393 were deemed usable. As a result of data analyses using SPSS 12.0 and AMOS 5.0, we found that: First, two attitude factors, the authenticity and aesthetic elements, exerted a significant effect on the intent to purchase. However, the last attitude factor, care and carriage convenience, did not significantly influence the purchase intention. Second, there was no significant difference in the attributes regarded as important when purchasing fashion cultural product between people from the U.S. and Japan. However, people from China showed differences in the attributes compared to the U.S. and Japan. Third, we found that attitudes toward fashion cultural products were different among respondents of three countries. It was revealed that the Chinese liked Korea's fashion cultural products the most, followed by Americans and Japanese. This research is significant because investigating foreigners' attitudes toward fashion cultural products for reaching out to a broader market abroad would contribute to help building an market entry planning.

• The Research Journal of the Costume Culture
• /
• v.13 no.1
• /
• pp.34-46
• /
• 2005

The purpose of this study was to research buying behavior and home fashion preferences based on housing size. The target consumers were Korean women, aged 20~40s who reside in the Seoul & Kyunggido areas. We distributed questionnaires to 650 women. However, only 600 questionnaires were used for the statistical analysis. Data analyses were conducted with SPSS program on the frequency, Chi-square test, cluster analysis, t-test and ANOVA. The results of this study are as follows: 1. The considering factors for purchasing such as brand, trends coordinating existing furnishings with new products and functionality were significantly associated with housing size. The buyers who reside in bigger size homes. over 40 pyung place higher value on brand name, trends. or coordinating existing furnishing with new products than residents in smaller units. However, women who live in smaller units place higher value on functionality when purchasing home fashion products. Considering factors such as brand, trend, and materials were also significantly associated with segmented age group; 40~49 age group considered brand, trend, and materials more than 20~29 age group. The group who are highly interested in home fashion considered design/color, rand, coordination, and functionality than the group who are low interested in home fashion. 2. Residents in over 40 pyung homes buy home fashion products at department stores, while residents in less than 39 pyung homes buy them at discounted store. 3. Respondents preferred solid colors more than patterns. However, they favored character pattern for textile bedding products for their children. 4. there is also a statistical difference in preferences for types of window treatments between large ad small housing sizes. Residents living in over 40 pyung preferred tie-back/cottage curtain, while residents living in less than 29 pyung preferred Roman shade style.

• Journal of Pharmacopuncture
• /
• v.17 no.1
• /
• pp.70-73
• /
• 2014

Objectives: Yamen is the fifteenth acupoint of the Governor Vessel Meridian (GV15). It is anatomically close to the medulla oblongata, so finding the safety depth of the acupoint is very important. However, few studies on the safety depth of GV15 have been done. Methods: This study tried to measure the safety depth of GV15 by using magnetic resonance imaging (MRI) scans and to analyze the factors affecting the safety depth through multiple regression analyses. This study was carried out for patients who had a brain MRI scan while visiting Jeonju Wonkwang Hospital, Korea. The shortest distance between the glabella and the occipital protuberance (DGO), the horizontal distance between the glabella and the back of the head (DGB) and the dangerous depth (DD) were measured from the sagittal views of the MRI images. The DD is the horizontal distance from the skin's surface at GV15 to the spinal dura mater. Results: The model suggested that the safety depth (SD) was significantly associated with gender (${\beta}$ = 0.474, P < 0.0001), DGO (${\beta}$ = 0.272, P = 0.027), and BMI (${\beta}$ = 0.249, P = 0.005) and the combination of three variables can explain the SD, with $R^2$ = 0.571 (Table 3). A longer SD was associated with males and with greater BMI and DGO. Conclusion: This study suggests that gender, BMI and DGO may be important factors when the SD of GV15 is considered clinically through a multiple regression analysis of GV15.