• Proceedings of the ESK Conference
• /
• 1995.10a
• /
• pp.156-163
• /
• 1995

An experimental protocol was developed and tested in this study in order to quantify the motor control capability of the trunk movement for both healthy subjects and low-back pain (LBP) patients. Information processing capacity (bits/second) (Fitts, 1954) and dynamic motor perfor- mance such as flexion/extension velocity and acceleration were measured as motor control parameters under the controlled range of motion (ROM). In this study, the original experimental propocol (Kim et al., 1993, 1994) was re-designed to reduce the length of the test via a series of statistical analyses for clinical application. The accuracy of the shortened protocol was statistically examined and indicated no difference conpared to the original protocol in terms of evaluating information processing capacity. This protocol was also tested among ten healthy subjects and ten LBP patients for validation purpose. The results showed that the information processing capacity was not significantly diffenent between two groups due to the large variation although there was an apparent mean difference. Average movement time showed a significant increase in LBP patients com- pared to healthy subjects. In conclusion, it was found that the new short experimental protocol could quantify the motor control capability of neuromuscular system of the trunk and also showed the applicability to patient population.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.5-15
• /
• 2012

In this study, a series of CFD (Computational Fluid Dynamics) numerical analyses were performed in order to evaluate the thermal performance of six full-scale closed-loop vertical ground heat exchangers constructed in a test bed located in Wonju. The circulation HDPE pipe, borehole and surrounding ground formation were modeled using FLUENT, a finite-volume method (FVM) program, for analyzing the heat transfer process of the system. Two user-defined functions (UDFs) accounting for the difference in the temperatures of the circulating inflow and outflow fluid and the variation of the surrounding ground temperature with depth were adopted in the FLUENT model. The relevant thermal properties of materials measured in laboratory were used in the numerical analyses to compare the thermal efficiency of various types of the heat exchangers installed in the test bed. The simulation results provide a verification for the in-situ thermal response test (TRT) data. The CFD numerical back-analysis with the ground thermal conductivity of 4 W/mK yielded better agreement with the in-situ thermal response tests than with the ground thermal conductivity of 3 W/mK.

• Fashion & Textile Research Journal
• /
• v.19 no.2
• /
• pp.230-239
• /
• 2017

In the clothes industry, there are lack of experts including technical designers who can analyze the fit of clothes. This study is to provide practical data available for fit analysis education by distinguishing the differences in standards and aspects of garment fit between experts and novices, through the eye-tracking technology to quantify the sense of fit. For this study, two groups were organized; one composed of 7 experts with over 15 year-experience including technical designers and patternmakers, and the other composed of 7 novices who are students majoring in clothing. Wearing the goggle type eye-tracker Tobii Pro Glasses 2, the participants in the experiments were required to conduct fit analyses for a pair of pants on a live model. After those experiments, they were required to check the items for fit analysis and assess the importance level of them on a questionnaire. The differences between the two groups in the ratios of total visit count and total visit duration by each AIO(Area of Interest) of clothes were analyzed through non-parametric statistical test. The results of eye tracking experiments showed that experts focused on center front and back line, crotch area, and side seam, while novice's fixation points were dispersed around the pants. The survey results showed that the experts put importance on the center line position and its verticality, front-back proportion of side seam line, and front-back proportion of waist line, 71.4~100% of whom checked them, while 14.3% of the novices checked them.

• Journal of Korean Physical Therapy Science
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2018

Background: The purpose of this study was to ascertain the effects of core program exercise on balance in patients with chronic low back pain. Thirty-four subjects participated in this study, these subjects were assigned into two groups, a control group(n=17) and an experimental group(n=17). Methods: The subjects in the control group were received a conservative physical therapy and in the experimental group carried out the core program exercise for 30 minutes per day, three times a week during 6 weeks. In order to evaluate the progresses of balance ability, corresponding variables were measured at two times, pre and 6th week. The balance ability was assessed using GOOD BALANCE system. The collected data were analyzed by using the paired t-test and ANCOVA. In all statistical analyses, significance level, ${\alpha}$ was set by 0.05. Results: The results of this study were as follows: 1) In the position of left standing eye closed, there were significant difference of Y in the control group and X, Y, V in the experimental group. 2) In the position of right standing eye closed, there were significant difference of Y in the control group and X, Y, V in the experimental group. 3) In the position of dynamic balance 1, there were significant difference APV in experimental groups. 4) In the position of dynamic balance 2, there were significant difference MLV in experimental groups. 5) There were significances between the two group of X, V in static balance and APV in dynamic balance. Conclusion: The above results indicated that a core program exercise improved balance abilities in patients with chronic low back. The further studies should be focused at development of various modified forms of the core program exercise in keeping up the improvement effect of this exercise.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.2
• /
• pp.109-120
• /
• 2020

PURPOSE: This study was conducted to verify the effects of a functional correction of the pain of patients with chronic low back pain(CLBP), and to examine the effect of dysfunctional factors on health-related quality of life. METHODS: A preliminary survey was first conducted on 90 patients with CLBP after functional orthodontic treatment. Some revised questionnaires were also prepared. The survey was distributed for approximately eight weeks, and 215 copies were used as the final analysis data, except for questionnaires that were inadequate, error or non-response. RESULTS: Path analysis using the structural equation model of CLBP patients showed a positive correlation between all the path coefficients and the potential factors. The multidimensional relationship between pain and dysfunction after orthognathic treatment was confirmed using three subdivisions of the pain variables as independent variables and the dysfunctional variables as the dependent variables. Multiple regression analysis was performed to examine the effects of pain on the dysfunction. To identify the multidimensional relationship between dysfunction and the health-related quality of life, eight sub-factors of dysfunctional variables were set as the independent variables, and multiple regression was analyses were performed with the dependent variables of the health-related quality of life. CONCLUSION: This study examined the structural and influence relationships of the functional correction with pain, dysfunction, and health-related quality of life. The results, suggest that a functional orthodontic treatment can be used as a positive program for the health-related quality of life. In addition, this study is meaningful in that it provieds useful information for intervention such as psychosocial change of patients.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.95-108
• /
• 2003

The purposes of this study were to analyze the muscle activities and the characteristics of muscle recruiting patterns of upper trunk for Ssirum dutguri technique using three top-ranked elite Ssirum players. The EMG technique was used to record muscle activities of both right and left sides of latissimus dorsi, biceps brachii, and erector spinae. Six surface electrodes were placed on the surface of the selected muscles and one ground electrode was also attached on the back of neck(C7). One video camera was also used to record the Ssirum motion to define 4 events and 3 phases for further analysis. The raw EMG data were filtered with band pass filter (50-400 Hz) to remove artifacts and then low pass filtered (4 Hz) to find the linear envelope which resemble muscle tension curve. This filtered EMG data were normalized to MVIC for the purpose of comparion between the subjects. The results were indicated that each subject with different physical characteristics showed very different muscle activity patterns. Although Ssirum dutguri is considered as foot technique the player grasped opponent's satba(belt) with both hands when they play. Because of this reason, activities of upper trunk muscles were relatively high. However, direct comparison between upper and lower body muscles was not possible due to the lack of the data in present study. Interestingly, all threes subjects showed that erector spinae muscle activity was comparatively higher than those of latissimus dorsi and biceps brachii. This implies to reinforce back muscle as a routine of training to improve performance or to prevent back injury.

• The Korean Journal of Pain
• /
• v.35 no.1
• /
• pp.86-96
• /
• 2022

Background: To explore the association between low back pain (LBP) and pelvic pain (PP) and rectus abdominis diastasis (RAD) in postpartum women and identify the characteristics and risk factors. Methods: Women diagnosed with RAD and a history of labor and delivery, between 2009 and 2018, were identified from six hospitals within the Partners Healthcare System. Univariate and multivariable binary logistic regression analyses were used to identify the risk factors associated with pain. Results: Age at onset of RAD in the non-cesarean delivery group was earlier than those in cesarean delivery (CD) group (P = 0.017). Women who underwent CD demonstrated 4.5 times greater risk of RAD than those who had no CD exposure. The cumulative composition ratio of LBP at every age stage of the period from 8 years pre-first delivery to 8 years post-first delivery was significantly higher than the other five conditions (RAD, umbilical hernia, PP, depressive disorder [DD], and strain of muscle, fascia, and tendon [SMFT]) (P for trend < 0.001). Women with DD, SMFT, and PP were more likely to have LBP (odds ratio [OR] = 1.91, 95% confidence interval [CI] 1.06 to 3.47, P = 0.032; OR = 4.50, 95% CI 1.64 to 12.36, P = 0.003; OR = 2.14, 95% CI 1.17 to 3.89, P = 0.013; respectively). Conclusions: In postpartum women with RAD, DD, SMFT, and PP were found to be risk factors contributing to the development of LBP. Race and LBP also played roles in the development of PP.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.4
• /
• pp.127-134
• /
• 2015

Aluminum nitride (AlN) single crystals have attracted much attention for a next-generation semiconductor application because of wide bandgap (6.2 eV), high thermal conductivity ($285W/m{\cdot}K$), high electrical resistivity (${\geq}10^{14}{\Omega}{\cdot}cm$), and high mechanical strength. The bulk AlN single crystals or thin film templates have been mainly grown by PVT (sublimation) method, flux method, solution growth method, and hydride vapor phase epitaxy (HVPE) method. Since AlN suffers difficulty in commercialization due to the defects that occur during single crystal growth, crystalline quality improvement via defects analyses is necessary. Etch pit density (EPD) analysis showed that the growth misorientations and the defects in the AlN surface exist. Transmission electron microscopy (TEM) and electron back-scattered diffraction (EBSD) analyses were employed to investigate the overall crystalline quality and various kinds of defects. TEM studies show that the morphology of the AlN is clearly influenced by stacking fault, dislocation, second phase, etc. In addition EBSD analysis also showed that the zinc blende polymorph of AlN exists as a growth defects resulting in dislocation initiator.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.60-68
• /
• 2009

The objective of this paper is to design stamping die of inner reinforcement panel with DL 950 advanced high strength steel as stamping materials through numerical analyses and experiments. The stamping process was designed as bending dominant process consisting of 1 step of notching and 4 steps of bending processes. In order to obtain a proper design of the stamping die, various three-dimensional elasto-plastic finite element analyses were performed using a commercial code AUTOFORM V4.2. Design parameter of stamping die was chosen as the corner radius of the stamping die for each step. From the results of the FE analysis, feasible corner radii of the stamping die, which can minimize the deviation of corner angle of the stamped part from design data, and forming load for each part were estimated. Stamping experiments were carried out using the manufactured stamping die according to the proposed die design. The results of experiments were shown that the stamping die can successfully manufacture the inner reinforcement panel with DL 950 advanced high strength steel as base stamping material.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1846-1857
• /
• 2011

This paper deals with design and analysis of surface-mounted PM (SPM) motor for compressor of air-conditioning system for electric vehicle applications according to slot/pole combination. First, required torque-speed curve characteristics are determined from operating conditions of the compressor. Restricted conditions such as motor size limit and current density are also determined. And then, under same rated and restricted conditions, twelve models which have different slot/pole combinations each other are designed for various pole arc/pitch ratio using simple equations and 2-d finite element (FE) analyses. Designed models are analyzed and compared in terms of back-emf THD, cogging torque, torque ripple, power losses, efficiency, etc. On the basis of analysis results, it is found that the motor with a 6-pole PM rotor and a 27-slot stator has most outstanding performances in electromagnetic aspects. Finally, through the mechanical modal analysis and demagnetization analysis, it is concluded that the determined motor is most suitable for the compressor of air-conditioning system for electric vehicles.