• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.7
• /
• pp.1049-1054
• /
• 2003

A group of Hanwoo (Korean cattle) steers (n=14,386) was sampled from a commercial abattoir located in Seoul over one year period (spring, summer, autumn and winter) and their carcass traits were collected. Carcass traits assessed by an official meat grader comprised degree of marbling, meat color, fat color, texture and maturity for quality grade, and back fat thickness, ribeye area and carcass weight for yield grade. A heavier carcass with a higher marbling score, more red meat color and white fat color received better quality grade (p<0.05). Regression analysis showed that the marbling score was the strongest attribute (partial $R^2=0.88$) for quality grade. Lighter carcasses with a thinner back fat and larger ribeye area received higher yield grade score. The back fat thickness was the most negative determinant of yield grade (Partial $R^2=-0.66$). The slaughter season had a little effect on quality and yield grades. As slaughter weight increased, back fat thickness and ribeye area increased linearly, whereas marbling score reached its asymptotic level at approximately 570 kg. As a consequence, quality grade showed a considerable improvement up to 570 kg, but increases in slaughter weight afterward showed a little benefit on quality grade. There was a clear curvilinear relationship between slaughter weight and yield grade in that the yield grade reached its highest point at approximately 490 kg and decreased afterward. These results suggested that 570kg at the age of 24 months might be the economic slaughter weight for quality grade but 490 kg for yield grade.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2621-2626
• /
• 2013

This paper has presented the potential distribution for asymmetric double gate(DG) MOSFET, and sloved Poisson equation to obtain the analytical solution of potential distribution. The symmetric DGMOSFET where both the front and the back gates are tied together is three terminal device and has the same current controllability for front and back gates. Meanwhile the asymmetric DGMOSFET is four terminal device and can separately determine current controllability for front and back gates. To approximate with experimental values, we have used the Gaussian function as doping distribution in Poisson equation. The potential distribution has been observed for gate bias voltage and gate oxide thickness and channel doping concentration of the asymmetric DGMOSFET. As a results, we know potential distribution is greatly changed for gate bias voltage and gate oxide thickness, especially for gate to increase gate oxide thickness. Also the potential distribution for source is changed greater than one of drain with increasing of channel doping concentration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.691-694
• /
• 2013

This paper has presented the potential distribution for asymmetric double gate(DG) MOSFET, and sloved Poisson equation to obtain the analytical solution of potential distribution. The symmetric DGMOSFET where both the front and the back gates are tied together is three terminal device and has the same current controllability for front and back gates. Meanwhile the asymmetric DGMOSFET is four terminal device and can separately determine current controllability for front and back gates. To approximate with experimental values, we have used the Gaussian function as charge distribution in Poisson equation. The potential distribution has been observed for gate bias voltage and gate oxide thickness and channel doping concentration of the asymmetric DGMOSFET. As a results, we know potential distribution is greatly changed for gate bias voltage and gate oxide thickness, especially for gate to increase gate oxide thickness. Also the potential distribution for source is changed greater than one of drain with increasing of channel doping concentration.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.24 no.2
• /
• pp.51-58
• /
• 2018

Backdround: Using RUSI (Rehabilitation Ultra Sound Imiging) method, which showed high reliability in soft tissue measurements, we compared the muscle relax and contraction, sex, and physical characteristics of the activity of the multifidus muscle in patients with chronic low back pain and normal subjects. Methods: In this study, 16 patients (male: 8, female: 8) with chronic low back pain and 16 healthy adult (male: 8, female: 8) were participated. Subjects lied prone posture on the table with elbow flexed $90^{\circ}$ and shoulder abducted $120^{\circ}$ (starting position). Test was applied two types that muscle relax position and muscle contraction position. Muscle relax position is equal to starting position and muscle contraction position is that upper extremity lift up about 5cm from the table. We measured the thickness of the multifidus muscle in each position by ultrasound. Results: There was a statistically significant difference between the two groups in deviation of Both Side Difference of Activated resting-Arm Lifting Ratio according to posture change between the chronic low back pain patient group and the normal group. Conclusion: The result of this study support previous study showing that there is an imbalance in the activity of multifidus in patients with chronic low back pain.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.415-418
• /
• 1995

This paper describes a new technique for thickness measurement of a very thin layer less than one-quarter of the wavelength of ultrasonic wave using ultrasonic pulse-echo method. The technique determines the thickness of a thin layer in a layered medium form the amplitudes of the total reflected waves from the back side layer of interst. Thickness of a very thin layer few inch deep inside the media can be measured without using a very high frequency ultrasonic transducer over 100MHz which must be used in the conventional techniques for the precision measurement of a thin layer. The method also requires no inversion process to extract the thickness from the waveform of the reflected waves, so that it makes possible on-line measurement of the thickness of the layer.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.80-89
• /
• 1998

Back rake angle of tool is one of the fundamental effects to the cutting ability. In this paper, for several back rake angle of lathe tool (-5$^{\circ}$ , 0$^{\circ}$ , 5$^{\circ}$ , 10$^{\circ}$ , 15$^{\circ}$ ), we experimentally examine cutting forces via orthogonal cutting. Using measured cutting forces, a formula for specific cutting resistance is derived according to the variation of tool angle. Also, the measured cutting forces are analyzed in both time and frequency domain. Cutting parameters are obtained by measuring the thickness of chip, and the effect of the back rake angle of tool is manifested. This study maintains the predicted cutting model with improved accuracy.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.233-243
• /
• 2012

The purpose of this study was to examine the effects of lumbar stabilization exercise using the PNF techniques on the lumbar deep muscles thickness and functional activity in chronic low back pain patient. Group I(n=10): general physical therapy group; Group II(n=10): general lumbar stabilization exercise group; Group III(n=10): lumbar stabilization exercise using PNF techniques(stabilizing reversal, rhythmic stabilization, combination of isotonic) group. Change of pain was measured with visual analog scale(VAS). To observe muscle thickness changes, we measured transverse abdominis(TrA), external oblique(EO), multifidus with real time ultrasound scanning. The functional activity were measured with Oswestry Disability Questionnaire(ODQ) and Roland & Morris Disability Questionnaire(RMDQ). In VAS test, group III had more significantly decreased than before exercise. In muscle thickness test, group III had more significantly increased than before exercise in right/left TrA, EO, multifidus. In ODQ & RMDQ test, group III had more significantly decreased than before exercise. This study show that the PNF techniques is effective in improving the lumbar stability and functional activity in chronic low back pain patients.

• Physical Therapy Korea
• /
• v.23 no.2
• /
• pp.67-74
• /
• 2016

Background: Lumbar stabilization (LS) improve the thickness of the quadratus lumborum (QL) muscle and muscle activity of the gluteus medius (GM) muscle during hip abduction in a side-lying position in patients with low back pain (LBP). Objects: The purpose of this study was to assess the effects of LS on muscle thickness of QL and muscle activity of GM during hip abduction in side-lying in patients with LBP. Methods: The study included 32 patients with LBP, who were randomly divided into the control group and experimental group, each with 16 patients. All subjects performed $35^{\circ}$ preferred hip abduction (control group) and $35^{\circ}$ hip abduction with LS (experimental group) during side-lying. An ultrasonography and a surface electromyography were used to measure the thickness of the QL muscle, and the muscle activities of the GM muscle respectively. Independent t-test was used to compare the muscle thickness of the QL and the muscle activity of the GM muscle, respectively. Results: Anterio-posterior diameter in the muscle thickness of QL muscle was decreased significantly in hip abduction with LS more than in preferred hip abduction (p<.001), but medio-lateral diameter in the muscle thickness of QL muscle was not significantly different between in preferred hip abduction and in hip abduction with LS (p=.06). The muscle activity of GM was increased significantly in hip abduction with LS more than in preferred hip abduction (p<.001). Conclusion: These findings suggest that hip abduction with LS could be recommended as a hip abduction for LS and a prevention unwanted compensatory pelvic lateral tilting movement.

• Korean Journal of Materials Research
• /
• v.25 no.1
• /
• pp.16-20
• /
• 2015

In this study, in order to improve the efficiency of n-type monocrystalline solar cells with an Alu-cell structure, we investigate the effect of the amount of Al paste in thin n-type monocrystalline wafers with thicknesses of $120{\mu}m$, $130{\mu}m$, $140{\mu}m$. Formation of the Al doped $p^+$ layer and wafer bowing occurred from the formation process of the Al back electrode was analyzed. Changing the amount of Al paste increased the thickness of the Al doped $p^+$ layer, and sheet resistivity decreased; however, wafer bowing increased due to the thermal expansion coefficient between the Al paste and the c-Si wafer. With the application of $5.34mg/cm^2$ of Al paste, wafer bowing in a thickness of $140{\mu}m$ reached a maximum of 2.9 mm and wafer bowing in a thickness of $120{\mu}m$ reached a maximum of 4 mm. The study's results suggest that when considering uniformity and thickness of an Al doped $p^+$ layer, sheet resistivity, and wafer bowing, the appropriate amount of Al paste for formation of the Al back electrode is $4.72mg/cm^2$ in a wafer with a thickness of $120{\mu}m$.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.2
• /
• pp.101-106
• /
• 2014

Objective: To investigate the appropriate position for abdominal drawing-in maneuver (ADIM) exercise by rehabilitative ultrasound image. Design: Cross-sectional study. Methods: Twenty-eight young adults with no history of low back pain participated in the study. Three positions compared were crook lying position with hip $60^{\circ}$ flexion, standing position with the feet hip width apart and knees straight, and saddle standing positionunsupported with the knees $20^{\circ}$ flexed. Once in the appropriate position, the subjects were verbally cued to draw in their abdominal wall, with the intention of pulling their navel inward toward their lower back. The thickness of each transversus abdominis (TrA), internal oblique (IO), and external oblique (EO) muscles were measured via ultrasound and recorded at the end of inspiration. Results: When compared to the TrA thickness of rest, the TrA thickness was significantly increased in all three positions (crook lying, standing, and saddle standing) during the ADIM (p<0.05). IO thickness was significantly greater in standing and saddle standing than in crook lying (p<0.05). EO thickness was constant in all the three positions. Conclusions: The present study suggests that standing and saddle standing positions could be recommended for the ADIM to maximize recruitment of the TrA and IO activation. Specifically, the saddle standing position with knees flexed to $20^{\circ}$ was observed to increase the TrA activation more than the standing position. These findings should be considered when core stability exercises such as the ADIM are conducted.