• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.201-210
• /
• 1996

The perpose of this study is to compare and to analyze the characters of the shape of up-per arm and armscye line between young and aged women. The subjects were measured with the Mar-tin's anthropometer and with free curve ruler. 10 items in the shape of upper arm were measured and 16 items in the shape of armscye line measured indirectly based on the measured shape taken from the subjects with free curve ruler and both date were analyzed. Mean standard deviation f-test factor analysis were performed for the statistical analysis of the date. The main results were as follows: 1) The shape of the upper arm is long and narrow in youg women compared with aged. 2) The length of the axilla of the aged women were longer than that of young women. 3) There are significant differences young and aged women on the shape of armscye line. THe length of from the front point of axilla to shoulder point width and depth of the shape of the armscye line length of axilla of aged women were longer than that of young. but the length of from the back point of axilla to shoulder point of yyoung women was longer than aged. 4.) The front point of axilla was existed lower than back point of axilla in aged women while front point of axilla was existed higher than the back point in young. 5) Through the factor analysis two factors were obtained from the shape of the upper arm and five factors from the shape on armmscye line in both groups. Factor compornents in the shape of the up per arm were length width and girth of that and in the shape of the armscye line were width and length of upper and lower back and front part of the shape of the armscye line depth of the axilla. he items in the same factor were resemble each other between two groups.

• Journal of the Korean Home Economics Association
• /
• v.17 no.4
• /
• pp.1-14
• /
• 1979

The functional problems of the basic pattern of clothing are a matter of the first importance to clothing construction. Therefore, the ergonomic analysis of the expansion and contraction of the upper body surface, due to motion, has become required. thus in order to obtain the measurements and rate of expansion and contraction of the upper body surface following from its motions, the development figure of " Shell" and somatometry were employed. The results obtained through the investigation can be summarized as follows : 1) According to the developmental figures of "Shell" the latitudes centering around the shoulder line present contractive tendencies by arm movement. The longitudes around the center back waist length are expansive tendencies when bent forward. In the case of a 15$^{\circ}$ lean backward posture, the longitudes around the center front waist length are expansive tendencies. 2) By somatometry, the region from the scapula to the axilla point the upper back with presents the greatest expansion (more than 30%). The region from scapla to arm presents the maximum rate of contraction. In considering the longitude , under the axilla waist length and the bust point waist length generally shows the greatest rate of expansion. 3) The bust point waist length and under the axilla waist length are of great importance to the basic pattern of clothing. and have expansive tendencies(6.3cm). Among the latitudes, the upper back width has the greatest tendency for expansion (7.83 cm). 4) The region which presents the greatest rate of the expansion and contraction is in the proximity of the arm. These results testify that the amount of room of the back width must be given consideration in constructing the basic pattern of clothing.pattern of clothing.

• Journal of Fashion Business
• /
• v.11 no.5
• /
• pp.35-50
• /
• 2007

The purpose of this study was to investigate the result of a market research on men's jacket in their age of 25 to 35, who wear fitted jackets most, and to examine the comparative analysis of pattern and the wearing evaluation between classic jacket and fitted jacket. The results are as follows; Firstly, according to the results of a market research, 32.0% of the target owned fitted jackets, and 28.7% expressed their desire to buy only fitted jackets. This means their concern and preference for fitted jacket with which they could show up young, fresh and slim look are as high as those for classic jacket. Secondly, classic jacket showed the higher value than fitted jacket in such items as chest girth, waist girth, hip girth, sleeve's hem girth, jacket length, shoulder length, side seam length, and across shoulder point length. On the other hand, fitted jacket showed the higher value than classic jacket in back armhole length, front length, collar point length and sleeve's vent length. Thirdly, classic jacket was larger than fitted jacket in 1/2 chest girth(1.0cm), 1/2 waist girth(2.0cm), 1/2 hip girth(1.0cm), back width(0.5cm), front width(0.5cm) and side width(1.0cm). However, fitted jacket was higher than classic jacket in the armhole depth(0.5). Fourthly, the results of appearance evaluation revealed that there was a significant difference in 6 items. In other words, classic jacket was evaluated more appropriate than fitted jacket in such items as back width, back length, back neck depth, chest girth, waist girth and hip girth. And the fitted jacket had a higher value than the classic jacket in shoulder angle item. Fifthly, In the functional evaluation, fitted jacket was evaluated more uncomfortable than classic jacket. And this means that fitted jacket doesn't have a proper ease amount in each part and it has a high armhole depth compared to classic jacket. Therefore, for more comfortable patternmaking of fitted jackets, it would be required a pattern design which reflect men's own shoulder lines and women designers' flexibility that will satisfy both appearance and function.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.471-475
• /
• 2017

This study aims to suggest the methodology to improve to estimate back-calculated fish growth parameters using weighted average. It is to contribute to correct errors in the calculation of back-calculated growth equation with unequal numbers of sample by age. If the numbers of sample were evenly collected by age, each back-calculated length at age was equal between arithmetic and weighted averages. However, most samples cannot be evenly collected by age in reality because of different catchability by fishing gear and limitation of environment condition. Therefore, the estimation of back-calculated length by weighted average method is essential to calculate growth parameters. There were some published growth equations from back-calculated length using a simple arithmetic average with different numbers of samples by age when searching for back-calculated growth equations from 91 relevant papers. In this study, the process of deriving growth equation was investigated and two different average calculations were applied to a fish growth equation, for example of Acheilognathus signifer. Growth parameters, such as $L_{\infty}$, k and $t_0$, were estimated from two different back-calculated averages and the growth equations were compared with growth performance index. Based on the correction of back-calculated length using weighted average by age, the changes by female and male were -14.19% and -5.23% for $L_{\infty}$, and 59.28% and 18.91% for k, respectively. The corrected growth performance index by weighted average improved at 7.05% and 2.46% by female and male, respectively, compared to the arithmetic averages.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.1
• /
• pp.39-50
• /
• 2013

This study estimates the measurements required to make garments but omitted from Size Korea 2010. Before the estimation of the measurements, the differences of the measurement methods were reviewed through previous research related to clothing construction and various measurement protocols that include previous Size Korea 2010 projects and ISO. The research target was 308 females aged 20 to 30 who lived in Seoul and the surrounding Gyeonggi province. A total of 43 measurements were obtained by the direct measurement method and analyzed in this study. In addition, 17 measurements which differ from the measurement method were also measured directly. These 17 measurements items were waist height, waist back height, waist height natural indentation, body rise, rise length, waist back length 1 & 2, posterior shoulder length 1 & 2, arm length 1 & 2, upper arm circumference 1 & 2, elbow circumference 1 & 2, and waist circumference 1 & 2. To analyze the differences in measurements, the subjects were divided into 2 age groups (20's and 30's). The results were as follows: First, there were big differences in stature, waist height, shoulder length, total length, and neck shoulder point to breast points by age groups; however, there were no differences in 17 measurement (such as shoulder angles) by age groups. Second, it was determined that 'waist circumference 1 & 2', 'waist back length 1 & 2', 'arm length 1 & 2', 'elbow circumference 1 & 2', 'upper arm circumference 1 & 2' and 'body rise & rise length' had significant differences by measurement methods in the entire group as well as each age group. Third, the values of 8 measurements omitted from Size Korea 2010 were estimated using similar measurements. The results of the correlation analysis were utilized to select reasonable independent measurements. Finally, 10 regression equations were obtained by regression analysis; subsequently, these will be useful for estimation of omitted measurements in Size Korea 2010.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.6
• /
• pp.826-837
• /
• 2015

This study analyzes the shapes of the adjustment of a Napoleon Collar which combines a stand collar with an upper collar. It established experimental conditions for fixing the conditions of Napoleon Collar components (lapel width, stand collar size and upper collar size) as well as varied the shape of the neckline, the length of the curve of a stand collar and the size of the drawing space at the center back. It produced 22 test clothes of muslin, which were dressed on dress form No. 8. The results indicate that: 1. Neckline shape determines the amount of stand and fall. Less curved neckline stands higher against the neck and a more curved neckline is laid lower onto the body. 2. A shorter curve length of a stand collar allows a longer roll line to fall farther away from the neck with more space between the neck and collar. However, the longer the depth of curve of a stand collar creates a shorter roll line that stands high against neck and closer to neck without any space between the neck and collar with a collar line matching the neck of the dress form. 3. The smaller the drawing space at the center back creates a shorter the style line of the upper collar. However, a narrower back width of the collar creates a bigger drawing space at the center back with a longer the style line and a more naturally placed back width of the collar. 4. A Napoleon Collar creates a longer depth of curve for a stand collar and a smaller drawing space at the center back that is tightly and stably stuck to the neck.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.1000-1009
• /
• 2013

Well-fitting riding breeches provide a comfortable ride. Horse-riding breeches should fit the lower body with patches located on the inside of hip and knees to prevent tears and slips. This study provides information about the fit of women's breeches using 3D human body scan data wearing commercially available two breeches according to posture. To get information about breeches fit, we measured the angle of waist line, the length, and the area of the breeches fit on four 20's women. This research showed the problem which was down for waist back line in the case of the horseback riding pose. The back waistline of the riding breeches should be raised compared to the front waistline; subsequently, an increased waistline angle results in less back waistline decrease. The breeches have plenty of length from back waist to crotch so the breech fit can be improved. The thigh circumference increased when riding in the front; therefore, good elasticity of the weft direction of the fabric is recommended. The length increase and the peripheral increase of the front knee significantly increased the surface area of the knee; consequently, knee patch material should be a two-way elastic fabric in all directions to enhance comfort according to riding motion.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.4
• /
• pp.21-28
• /
• 1986

Plywood used for construction as a decorative inner material is inflammable and can fire accident, causing destruction of human life and property. In this study, 3.5mm Kapur plywoods were soaked in the 23% monoammonium phosphate solutions by cold soaking method 3, 6, 9hrs and hot-cold bath method for 3/3hrs, and redrying was carried out by press-drying at the platen temperature of 110, 130, 160, 180$^{\circ}C$, and then fire test was carried out to investigate burning point, flame exhausted length, frame spread length, back side carbonized area and weight loss. The results are as follows; 1. In cold soaking method for 3, 6, 9hrs. retentions of monoammonium phosphate were 0.377, 0.448, 0.498kg/(30cm)$^3$ respectively, and in hot-cold bath method for 3/3hrs, the retention was 1.331kg(30cm)$^3$ that exceeded the minimum retention 1.124kg/(30cm)$^3$. 2. Correlation coefficients among the variable were shown in table 2. From the table, it could be recognized that there were close negative correlations between the treatment and burning point, flame spread length, back side carbonized area, flame exhausted time and weight loss, and there was negative correlation between treating time and back side carbonized area, but there was positive correlation between platen temperature and burning point. 3. From table 3, it can be observed that there were highly significant differences for burning point, flame spread length, flame exhausted time, back side carhonized area, weight loss between treatments. And in 2-way interactions, there were also highly significant for burning point, flame spread length, flame exhausted time, weight loss between time x treatment. 4. It was observed that burning point, flame exhausted time, flame spread length, back side carbonized area, and weight loss in fire-retardant treated plywood were the best effects in fire-retardant treated plywood, water treated plywood and nontreated plywood. In conclusion, I can estimate that absorbed chemical contents by hot-cold bath method for 3/3hrs, have a lot of effects on fire-retardant factors such as burning point, flame spread length, flame exhausted time, backside carbonized area and weight loss, but platen temperatures have a little effects on the fire factors.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.473-481
• /
• 2012

For a mesa-isolated small geometry SOI MOSFET, the potentials in the silicon film, front, back, and side-wall oxide layers can be derived three-dimensionally. Using Taylor's series expansions of the trigonometric functions, the derived potentials are written in terms of the natural length that can be determined by using the derived formula. From the derived 3-D potentials, the minimum values of the front and the back surface potentials are derived and used to obtain the closed-form expressions for the front and back gate threshold voltages as functions of various device parameters and applied bias voltages. Obtained results can be found to explain the drain-induced threshold voltage roll-off and the narrow width effect of a fully depleted small geometry SOI MOSFET in a unified manner.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.751-756
• /
• 2000

Based on Experimental analysis, the characteristics of back pressure in automotive exhaust system is tested for 4-stroke gasoline engine. The back pressure in automotive exhaust system is generated by resistance working of exhaust system, i.e. exhaust manifold, pipe length, pipe banding, difference system pressure with atmospheric pressure. This paper contains experimental results which are tested for the change of exhaust pipe length and torque change are tested under experimental conditions.