• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.38.2-38.2
• /
• 2010

We have studied mechanisms of back contact formation in Al evaporation and screen printed Al paste for Si solar cells by TEM analysis. We observed that Si diffuse into Al during heat up. The Si diffusion process made vacancies in Si wafer. The Al began to seep into the Si wafer (Al spike). During heat down, the Al spike were shrink which causes the doped region (BSF).

• 전기화학회지
• /
• 제9권4호
• /
• pp.137-140
• /
• 2006

In order to overcome the weak actuation and relaxation problems during the deformation of IPMC actuator, polymeric anion (polystyrenesulfonate)-doped polypyrrole(Ppy(PSS)) was electrodeposited onto IPMC actuator. Electrochemical quartz crystal microbalance study showed that hydrated cations were instilled into Ppy(PSS) film and polymeric-anion dopants introduced during polymerization were not expelled. Ppy(PSS)-coated IPMC actuator formed two electrode/electrolyte interfaces, Pt/nafion and Ppy(PSS)/bulk solution, and additive volume expansion phenomena at interfaces induced the large deformation compensating the relaxation of actuation by back diffusion of water.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1255-1260
• /
• 2003

In order to reduce driving power consumption, we propose and fabricate a new structure of asymmetric SOI 1${\times}$2 thermo-optic switch that has a back side silicon trenched structure. Compared to conventional SOI thermo optic switches without heat sink structure, it shows an improvement of switching power reduction from about 4 watt to 1.8 watt without sacrificing cross talk of about 20 ㏈ at the light wavelength of 1.55 $\mu\textrm{m}$. Here we also described the main design consideration and fabrication procedure for the proposed device.

• 한국분무공학회지
• /
• 제15권1호
• /
• pp.25-30
• /
• 2010

The capability of pilot injection with small fuel quantity at all engine operating conditions is one of the main feature of the common rail direct injection system. The purpose of the pilot injection is to lower the engine noise and to reduce the NOx emissions. This study describes the pilot spray structure characteristics of the common-rail diesel injectors with different electric driving characteristics, including solenoid-driven and piezo-driven type. Namely three common-rail injectors with different electric current wave were investigated in this study. The pilot spray characteristics such as spray speed, spray tip penetration, and spray angle were obtained by spray images, which is measured by the back diffusion light illumination method with optical system for high-speed temporal photography. As this research results, it was found that pilot injection of common-rail system was effected by rate of injection with different electrical characteristic for driving the injector.

• 대한수의학회지
• /
• 제7권2호
• /
• pp.51-55
• /
• 1967

The mammary excretion of suphamethomidine after intravenous and/or oral administration was investigated in cow. The results show that sulphamethomidine is bound to plasma proteins to a great extent (80~90%). Ay a dosage of 60 mg./kg. maximal concenration in plasma of this sulphonamide was reached 7-10 hours after oral dosing. The sulphonamide concentration in plasma slowly declined after both oral and intravenous administration (fig. 1, 2, and 3) The concentration of sulphonamide in milk was very low and the excretion was completed in 7 days after a single oral dose and 5 days after intravenous injection while in the case of blood plasma it was 11 and 7 days, respectively. In addition, the renal excretion of sulphamethomidine was investigated while under continuous intravenous intravenous infusion. The excretion ratios varies according to self depression (table. 1). Blockade of the tubular secretion with diodone lowered the excretion of sulphamethomidine. It is concluded that the renal excretion of sulphamethomidine in cows occurs by filtration by slight tubular secretion and also by a high rate of back diffusion.

• 한국CDE학회논문집
• /
• 제14권5호
• /
• pp.346-354
• /
• 2009

BRDF (bidirectional reflectance distribution function) is critical in realistic simulation of material appearances since it models the directional characteristics of reflection of light. Although many BRDF models have been proposed so far, it is still not easy to find one specific model that could represent all the reflection properties of real materials such as generalized diffusion, off-specular reflection, Fresnel effect, and back scattering. In this paper, we compare three BRDF models including B-spline volume BRDF (BVB), Cook-Torrance, and Lafortune in their ability to represent the measured BRDF data for physically-based rendering. We show that B-spline volume BRDF surpass the others in quality of data fitting and rendering, especially for materials without specular reflections.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.51-54
• /
• 2005

Light Guide Plate (LGP) of LCD-BLU(Back Light Unit) is manufactured by forming optical pattern with $5\~100um$ in diameter on the LGP by means of sand blasting or etching method. However, in order to improve the luminance of LCD-LGP, the design of optical pattern has introduced UV inclined-exposure process in this study. This micro-optical pattern, which has asymmetric elliptical column shaped pattern, can change low viewing-angle to high viewing-angle, as well as it contribute to diffusion of light. As a result, this type of micro-optical pattern can introduce the highly luminance. The PR structure obtained in the stage of lithography has asymmetric elliptical column shape and it is processed into a micro-optical pattern. Optical design with this kind of micro-optical pattern, mold fabrication by electroplating and LGP molding with injection molding are under way.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.63-66
• /
• 2006

A long term deactivation study was carried out with commercial MEA provided by Hyundai Motor Co. The deactivation phenomena were observed only at high voltage region where there is no diffusion-limited reaction. A rapid deactivation was observed up to 40h owing to the sintering of Pt particles. This was followed a gradual increase in the activity up to 300 h, which is probably caused by improvement in the electrode properties in the presence of current during the reaction. After 300 h, monotonic decrease in the activity was observed owing to dissolution of Pt particles especially in the cathode. The presence oxygen is the cause of oxidation and dissolution of Pt. The dissolution rate can be somewhat retarded by generation of current, which reduces Pt ion back to Pt in the cathode.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.100-101
• /
• 2003

본 논문은 초고속 광통신용 검출기로 사용되고 있는 InP／InGaAs Avalanche Photodiode (APD)에 대한 연구로서 구조 변화에 따른 APD의 특성에 대해 연구하였다. 채택된 APB의 기본 구조는 Separated Absorption, Grading, Charge and Multiplication (SAGCM)구조로 u-InP 의 두께 3.5$\mu\textrm{m}$에~2.9$\mu\textrm{m}$ 만큼 Zn diffusion 하였으며, u-InGaAs 의 흡수층 두께는 0.8$\mu\textrm{m}$ 로 하였다. charge sheet 층의 도핑 농도는 ~ 3.5 $\times$ 10／sup 12／／cm／sup 2／ 이고, 전극 구조는 back side illumination type이다. (중략)

• East Asian Economic Review
• /
• 제23권1호
• /
• pp.3-26
• /
• 2019

This study investigates the effect of high-skilled inventor emigration rate on growth rate of the country of origin (COO). Inventor emigrants represent the human capital that can generate highly innovative work. The social network they form spurs knowledge diffusion and technology transfer back to their COOs, which in turn affects innovation and growth in their home countries. We run dynamic panel estimation for 154 countries during 1990-2011, and empirically show that a positive and statistically significant effect exists for the interaction of inventor emigration and trade. The result indicates that the direct negative impact of the brain drain can be mitigated by the positive feedback effect generated by the high-skilled inventor emigrants abroad. When coupled with an active trade policy that reinforces growth, countries can partially recoup the direct effect of the human capital loss. We stress the importance of international trade for successful technology transfer to occur, and offer insights for policies that can utilize the benefits of the rich social network of their high-skilled emigrants.