• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.34-38
• /
• 2000

In this paper, interference effects between NGSO and HAPS in the feeder link have been simulated and analyzed by means of calculating excess time percent and duration below the C/I protection ratio. As the results, in the case of HAPS interference into NGSO, it can be obtained that the lowest C/I values are 27.42dB in 50km and 12.73dB in 20Km of HAPS altitudes, respectively. And in the case of NGSO interference into HAPS, it can be obtained that the lowest C/I values are 13.94dB and 10.42dB respectively. HAPS system has more interference reception from other systems or effects more interference into other systems as its altitude is lower. Also, the lowest C/I values are appeared at difference time with its altitude.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.312-322
• /
• 2006

The objectives of this study were to evaluate the effect of surface roughness on the surface color and translucency of the composite resins. Two composite resins (Esthet-X, Dentsply, Milford, USA and Charisma, Kulzer, Domagen, Germany) were used to investigate the surface color. Charisma was used to investigate the translucency. 40 disc samples (diameter: 8 mm, thickness: 5 mm) were made by each product to measure the surface color. Polymerized each sample's one side was treated by Sof-Lex finishing and polishing system (Group C, M, F, SF). 40 disc samples (diameter: 6 mm, thickness: 1 mm) were prepared to measure the opacity. 1 mm samples were ground one side with #600, #1000, #1500 and #2000 sandpapers. CIE $L^{*}a^{*}b^{*}$ values of each 5 mm thickness samples, and XYZ values of 1 mm thickness samples on the white and black background were measured with spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Mean surface roughness (Ra) of all samples before and after surface treatment was measured using the Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan). Regardless of type and shade of the composite resin, $L^{*}$ values measured in group C were higher than others (p < 0.05), and $L^{*}$ value decreased as the Ra value decreased except B3 shade of Esthet-X. But there were no significant difference in $a^{*}$ values among groups. In control group and SF, highest $b^{*}$ values were measured (p < 0.05), except B1 shade of Esthet-X. Contrast ratio decreased as the Ra value decreased (p < 0.05). With the above results, difference of surface roughness has influence on surface color and translucency of dental composite resins.

• The KIPS Transactions:PartB
• /
• v.11B no.4
• /
• pp.395-402
• /
• 2004

In this paper, we proposed a new method of the large capacity steganography using adaptive threshold on bit planes. Applying fixing threshold, if we insert information into all bit planes, all bit planes showed different image quality. Therefore, we first defined the bit plane weight to solve the fixing threshold problem. We then proposed a new adaptive threshold method using the bit plane weight and the average complexity to increase insertion capacity adaptively. In the experiment, we inserted information into the standard images with the same image quality and same insertion capacity, and we analyzed the insertion capacity and image duality. As a result, the proposed method increased the insertion capacity of about 6% and improved the image quality of about 24dB than fixed threshold method.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.133-138
• /
• 2006

Learning with Attribute Value Taxonomies (AVT) has shown that it is possible to construct accurate, compact and robust classifiers from a partially missing dataset (dataset that contains attribute values specified with different level of precision). Yet, in many cases AVTs are generated from experts or people with specialized knowledge in their domain. Unfortunately these user-provided AVTs can be time-consuming to construct and misguided during the AVT building process. Moreover experts are occasionally unavailable to provide an AVT for a particular domain. Against these backgrounds, this paper introduces an AVT generating method called GA-AVT-Learner, which finds a near optimal AVT with a given training dataset using a genetic algorithm. This paper conducted experiments generating AVTs through GA-AVT-Learner with a variety of real world datasets. We compared these AVTs with other types of AVTs such as HAC-AVTs and user-provided AVTs. Through the experiments we have proved that GA-AVT-Learner provides AVTs that yield more accurate and compact classifiers and improve performance in learning missing data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.355-359
• /
• 2009

본 논문에서는 퍼지 기법을 이용하여 구름의 종류를 분석하는 방법을 제안한다. 본 논문에서는 가시 영상과 적외 영상을 대상으로 육지 영역은 RGB 컬러 정보 중에 G 채널 값의 수치가 높고, 바다영역에서는 B 채널 값의 수치가 높다는 정보를 이용한다. 이 정보를 이용하여 육지 영역에서는 R과 B 채널 값을 적용하고, 바다 영역에서는 R과 G 채널 값을 적용한다. 가시 영상과 적외 영상에서 임계치를 적용하여 잡음(구름 이외의 영역)을 제거하고, 잡음을 제거한 영상에서 육지 영역과 바다 영역을 구분한 후, 각 R, G, B 채널 정보를 퍼지 기법에 적용하여 구름 영역을 판별한다. 그리고 가시영상과 적외 영상에 모두 포함된 구름 영역에 대해서는 두 영상을 합성하여 구름을 판별한다. 제안된 기법을 구름 분류에 적용한 결과, 제안된 방법이 기존의 양자화를 적용한 방법보다 구름의 분류 성능이 개선된 것을 확인하였다.

• Journal of the Korean Society of Radiology
• /
• v.5 no.2
• /
• pp.59-66
• /
• 2011

There is a difficulty because of classifying the anatomical structure in the neck CT scan by the beam hardening artifact no more than disease and it including the 6, 7 number cervical spine and intervertebral disk. In case of enforcing the neck CT scan cause of the inner diameter of beam artifact tried to be inquired by the image evaluation according to the change of the image evaluation according to the direction of the shoulder joint applying the variation method of a posture and location and Kernel value and it was most appropriate, the lion tax and Kernel value try to be searched for through an experiment. Somatom Sensation 16 (Siemens, Enlarge, Germany) equipment was used in a patient 30 people coming to the hospital for the neck CT scan. A workstation used the AW 4.4 version (GE, USA). According to a direction and location of the shoulder joint, the patient posture gave a change to the direction of the shoulder joint as the group S it gave a change as three postures and placed the both arms comfortably and helps a group N and augmented unipolar left in the wealthy merchant and group P it memorized the both hands and ordered the eversion and drops below to the utmost and enforced a scan. By using a reconstructing method as the second opinion, it gave and reconstructed the Kernel value a change based on scan data with B 10 (very smooth), B 20 (smooth), B 30 (medium smooth), B 40 (medium), B 50 (medium sharp), B 60 (sharp), and B 70 (very sharp). By using image data which gave the change of the examination posture and change of the Kernel value and are obtained, we analyzed through the noise value measurement and image evaluation of. The outside wire eversion orders the both hands and the examination posture is cost in the neck CT scan with the group P it drops below to the utmost. And in case of when reconstructing with B 40 (medium) or B 50 (medium sharp) being most analyzed into the inappropriate posture and Kernel value and applying the Kernel value to a clinical, it is considered to be very useful.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.36-36
• /
• 2011

안개나무 목질부의 열수추출물을 사용하여 한지를 염색하였다. 안개나무 목질부의 추출물을 동결건조하여 만든 염료 분말을 사용하여 제조한 0.0002%(wt) 농도의 염액은 198 nm에서 0.39의 흡광도를 278 nm 에서 0.10의 흡광도를 가지는 자외가시광선 흡수 피크를 나타내었으며 무매염으로도 한지에 염색이 잘 되었다. 염색된 한지는 황색 계열의 색을 나타내었으며, 명반 매염을 하면 $a^*$ 값과 $b^*$ 값이 동시에 증가하여 주황색을 띠는 것을 알 수 있고, 초산동 매염을 하면 $a^*$ 값이 증가하지만 $b^*$ 값이 감소하여 적색을 좀 더 많이 띠게 되었다. 염화철 매염을 하면 $b^*$ 값만 크게 감소하여 녹색계열의 색을 나타내었다. 닥섬유에 염색시 온도가 증가함에 따라서 염착량은 감소하는 경향을 보였고, 양이온화 섬유를 사용하면 염착량이 크게 향상되나, $a^*$값이 더 크게 증가하여 색상이 적황색으로 변하였다. 표면 전하밀도와 염착량은 정비례의 관계를 나타내었으며, 양이온화 정도가 높아질수록 제조한 색한지의 광견뢰도는 악화되었다.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.78-92
• /
• 2016

This study investigated the quality characteristics of white pan bread with banana addition. This analysis was through mixograph and stickiness of dough, fermentation rate, TPA, crumbScan image analysis, color, moisture contents and acceptance test. Mixograph peak time presented 4~5 minutes on every sample. However, CON, B10 and B20 sample presented more than 60%, and B30, B40 presented less than 60% at peak value (%). The result indicated that banana addition increased as the stickiness decreased. The fermentation rate generally increased, but the sample B40 decreased after 75 minutes. The result of crust and inside color, CON was the highest on lightness L value, B40 was the highest on both red a value and yellow b value. The result of pH showed that B40 was the lowest, and more banana addition made pH decreased. Thus, adding banana influences negatively on volume and cost of the product. The image analysis through crumbScan did not show any significant difference on crust thickness and distortion of crumb fineness. On the other hand, CON value was 774.33 that was the lowest, and B40 value was 927.66 which is the highest on the density of crumb fineness. Hardness showed a significant difference; B40 was the lowest, and Control was the highest. Moisture contents generally had a noticeable difference; CON value was the highest, and banana addition increased as the value decreased. At the result of acceptance test, one of the sensory tests, B20 showed the highest grade, and B40 showed the worst. Based on the above results of characteristic difference, banana addition could influence volume of the bread negatively.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.285-289
• /
• 2006

A novel alignment-free micro-optic MZI filter has been demonstrated. The filter is composed of two fiber-pigtailed collimators and a beam-splittingplate with a periodically etched stripe pattern. We fabricated the plate through a standard lithographic formulation process by using a pyrex substrate glass with SU-8 resist coating on its one of the surfaces. The maximum insertion loss of the implemented filter was less than 2 dB over 1000 nm to 1600 nm and the extinction ratio was larger than 33 dB. The measured PDL within the 3-dB pass band of the filter was less than 0.15dB and the maximum extinction ratio variation was less than 2 dB even when the worst alignment error occured.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4C
• /
• pp.424-432
• /
• 2003

In this paper, an effective method of stereo image reconstruction through the regularized adaptive disparity estimation is proposed. Althougth the conventional adaptive disparity estimation method can sharply improve the PSNR of a reconstructed stereo image, but some problems of overlapping between the matching windows and disallocation of the matching windows can be occurred, because the matching window size changes adaptively in accordance with the magnitude of feature values. Accordingly, in thia paper, a new regularized adaptive disparity estimation technique is proposed. That is, by regularizing the estimated disparity vector with the neughboring disparity vectors, problems of the conventional adaptive disparity estimated scheme might be solved, and also the predicted stereo image can be more effectively reconstructed. From some experiments using the CCETT'S stereo image pairs of 'Man' and 'Claude', it is analyzed that the proposed disparity estimation scheme can improve PSNRs of the reconstructed images to 10.89dB, 6.13dB for 'Man' and 1.41dB, 0.81dB for 'Claude' by comparing with those of the conventional pixel-based and adaptive estimation method, respectively.