• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.81-88
• /
• 2003

For driver's convenience, the ACC(Adaptive Cruise Control) requires a system which determines the direction of vehicles and controls the vehicle to keep the distance among the automobiles constant. This paper describes the microstrip array antennas designed to operate at 24 GHz, and used as a direction indicator of moving vehicles. 8${\times}$2 transmit array antenna with wide beamwidth, 8${\times}$4 receive center array antenna, and two 8${\times}$8 receive array antennas with narrow beamwidth were designed and fabricated. Measurement results for the arrays showed that the azimuthal beamwidth is 50$^{\circ}$and the gain is 16.7 dBi for the transmit array antenna. For the receive array antenna, the center, the left, and the right array antenna have beamwidths of 20$^{\circ}$, 13$^{\circ}$, 13$^{\circ}$respectively, and have gains of more than 20 dBi. The left and right array antenna have the beam tilt angle of ${\pm}$18$^{\circ}$. The measured radiation patterns showed a good agreement with the simulated patterns, and the designed array antennas are suitable fur detecting 3 directions of the vehicle within the scan angle area.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.721-731
• /
• 2023

This paper studies various roughness parameters, besides waviness, texture, and nonlinear parameters of Bismarck brown Y (BBY)-doped Poly(methyl methacrylate) (PMMA) films based on the computed values of optical limiting (OL) threshold power and nonlinear refractive index. The films' morphology, grain size, and absorption spectra were investigated using atomic force microscopy in conjunction with ultraviolet-visible (UV-Vis) spectrophotometer. The particle size of the films ranged between 4.11-4.51 mm and polymer films showed good homogeneity and medium roughness, ranging from 1.11-4.58 mm. A polymer film's third-order nonlinear optical features were carried out using the Z-scan methodology. The measurements were obtained by a continuous wave produced from a solid-state laser with a 532 nm wavelength. According to the results, BBY has a nonlinear refractive index of 10^-6 cm²/W that is significantly negative and nonlinear. The optical limiting thresholds are roughly 10.29, 13.52, and 18.71 mW, respectively. The shift of nonlinear optical features with the film's concentration was found throughout the experiment Additionally, we found that the polymer samples have outstanding capabilities for restricting the amount of optical power that may be transmitted through them. We propose that these films have the potential to be used in a wide variety of optoelectronic applications, including optical photodetectors and optical switching.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.3
• /
• pp.89-93
• /
• 2014

In this study, effects of the V/III ratio on a-plane GaN epitaxial on r-plane grown by HVPE have been investigated. According to increasing of V/III ratio, the value of FWHM of a-plane (11-20) GaN and the value of surface roughness (Ra) were decreased. Growth rate of a-plane GaN epitaxial layer were increased until V/III ratio = 7 as the increasing of V/III ratio, but it was reduced at V/III ratio = 10. At V/III ratio = 10, the FWHM of a-plane (11-20) GaN RC and the surface roughness (Ra) were 829 arcsec and 1.58 nm, respectively, as the lowest value in this study. Also for V/III ratio = 10, cracks under surface or voids were observed the lowest values in images of optical microscope. An M-shaped azimuthal dependence over $360^{\circ}$ angle range was observed for all samples. At V/III ratio = 10, the difference of FWHM of a-plane GaN between $0^{\circ}$ and $90^{\circ}$ was 439 arcsec revealed as the lowest value in the 4 samples.