• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.399-406
• /
• 2001

This study describes the geometric characteristic and the 5-axis machining method of end mill body with insert tip. The geometry of end mill body is consisted of the flute part and the insert tip part. Thus, this study defines the flute part as ruled surface with constant helix angle and the insert tip part as rectangular plane on general direction. The geometric algorithm and the 5-axis NC part program were calculated by our programmed software and a sampled end mill body was machined on 5-axis machining center equipped with two index tables. The machined end mill body with insert tip was very agreeable to the designed end mill body with insert tip. Thus, the method proposed in this study may be very useful for the machining of end mill body with insert tip.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.19-26
• /
• 1997

The manufacture of an impeller typically requires the 5-axis CNC machining, since the impeller is usually under working conditions such as high speed, high temperature, and high pressure. Thus, this study contributes to development of an exclusive CAM system for effective 5-axis CNC machining of a ruled surface type impeller. In this study, the sampled impeller is made of blades and a body and the blade consists of ruled surfaces between hub curve and shroud curve. In the post processing for 5-axis NC part program, the cutter axis direction vector is the straighten vector on ruled surface. The position of ball center in ball end mill cutter is decided on the interference check between the cutter and body surface of impeller using with the modified z-map method that z-axis is the same of cutter axis direction vector. The exclusive CAM system for an impeller developed in this study was very effective for designs and 50-axis machining of a ruled surface type impeller.

• 대한수의학회지
• /
• 제35권1호
• /
• pp.19-28
• /
• 1995

The histological and histochemical study of the axis body of piglet was performed in order to clarify the ossification process. These experimental animals collected from after birth to 52 days were used for this study. The results were summarized as follows; 1. The epiphysis, the intercentrum 2 and the centrum of proatlas were appeared in the axis body and dens of piglet after birth. 2. In 39 days of age piglet, the ossification of the intercentrum 2 was first observed but the epiphysis was already initiated. The centrum of proatlas was observed cranioventral part of the dens of the 52 days piglet axis. 3. The notochordal remnants revealed distinctively in the part between the centrum 1 and the centrum2, in the apical cartilaginous tissue of dens and in the caudal cartilaginous part of body of axis. 4. Intramembranous ossification occurred in the adjacent area of perichondrium of centrum 2. These ossified trabeculae show the woven bone configuration.

• 한국동물학회지
• /
• 제30권3호
• /
• pp.248-260
• /
• 1987

In order to investigate the importance of the prospective mesodermal and endodermal blastomeres at 32-cell stage in the anis formation, blastomeres were deleted or transplanted into the ventrovegital site of another normal embryo. The results are as follows: When the dorsomesodermal or dorsoendodermal blastomeres were deleted, there was a substantial developmental lesion in the axis structure. However, when the ventromesodermal or ventroendodermal blastomeres were deleted, the formation of an axis structure was nearly normal. The dorsomesodermal or dorsoendodermal blastomeres which were transplanted into the ventral side of the normal 32-cell embryo caused the formation of a secondary body axis, and the capacity of the second axis induction in the dorsomesodermal blastomeres was a little higher than that in the dorsoendodermal blastomeres. These results imply that both the dorsomesodermal and dorsoendodermal blastomeres are involved in the formation of a set of dorsal body structures during early embryogenesis. As well, in order to investigate the axis inducing capacity in the early cleavage embryos, the dorsovegital blastomeres were transplanted into the ventrovegital site at 4-cell, 8-cell and 16-ceIL stage respectively. As a ruts·fIt, a second body axis was formed. Therefore, it seems that the early cleavage embryo as 4-cell stage dorsal blastomeres contain some informations necessary for the axis formation.

• 소음진동
• /
• 제10권2호
• /
• pp.269-279
• /
• 2000

This paper deals with the development of biomechanical model on a seat with backrest support in the vertical direction. Four kinds of biomechanical models are discussed to depict human motion. One DOF model mainly describes z-axis motion of hip, two and three DOF models describe z-axis of hip and head, and while nine DOF model suggested in this study represents more motion than the otehr model. Three kinds of experiments were executed to validate these models. The first one was to measure the acceleration of the floor and hip surface in z-axis, the back surface in x-axis, and the head in z-axis under exciter. From this measurement, the transmissiblities of each subject were obtained. The second one was the measurement of the joint position by the device having pointer and the measurement of contact position between the human body and the seat by body pressure distribution. The third one was the measurement of the seat and back cushion by dummy. The biomechanical model parameters were obtained by matching the simulated to the experimental transmissiblities at the hip, back, and head.

• 동의생리병리학회지
• /
• 제16권6호
• /
• pp.1211-1216
• /
• 2002

To evaluate whole-body vibration(WBV) exposure and fatigue-decreased proficiency(FDP) boundary in passenger car driver, several roads in Busan were divided into 3 types by the condition of road surface; Road 1 was partially damaged, Road 2 was normal without damage, and Road 3 was better than Road 2. The results were following: The highest passenger driver's exposures to whole-body vibration acceleration and fatigue-decreased proficiency boundary at 40km/h were 0.108m/s² and about 2099 minutes in Road 2 for xh axis, 0.134m/s² and about 1585 minutes in Road 2 for yh axis, and 0.183m/s² and about 1053 minutes in Road 2 for zh axis, respectively. The highest passenger driver's exposures to whole-body vibration acceleration and fatigue-decreased proficiency boundary at 80km/h were 0.219m/s² and about 830 minutes in Road 3 xh axis, 0.203m/s² and about 918 minutes in Road 3 for yh axis, and 0.622m/s² and about 195 minutes in Road 1 for zh axis, respectively. The highest vector sums of whole-body vibration exposure at 40km/h and 804km/h were 0.328m/s² in Road 2 and 0.730m/s² in Road 1, respectively. The highest crest factors at 40km/h were 4.25 in Road 1 for xh, 4.51 in Road 3 for yh, and 5.81 in Road 2 for zh, respectively. The highest crest factors at 80km/h were 5.57 in Road 1 for xh, 5.60 in Road 2 for yh, and 6.46 in Road 3 for zh, respectively. The highest transmissibilities of whole-body vibration from floor to seat at 40km/h and 80km/h were 0.89 in Road 3 and 0.82 in Road 3 for xh axis, 0.83 in Road 3 and 0.87 in Road 1 and 2 for yh, and 0.80 in Road 2 and 0.92 in Road 1 tor zh axis, respectively. The highest fatigue-decreased proficiency boundaries for whole-body vibration exposure of passenger car driver in floor and seat were 457 minutes in Road 3 and 583 minutes in Road 3 at 40km/h and 159 minutes in Road 2 and 251 minutes in Road 2 at 80km/h, respectively.

• 전력전자학회논문지
• /
• 제9권1호
• /
• pp.1-9
• /
• 2004

본 논문에서는 로터 블레이드, 발전기, 로터 블레이드와 발전기에 연결된 고/저속 회전축 및 회전축간의 회전력을 전달하는 기어 시스템 등 다수의 몸체가 서로 상대적인 운동이 가능한 채 연결되어 있는 단일로터 수평축 풍력발전 시스템을 다몸체 시스템으로 간주한 후, 다몸체 역학을 이용한 풍력발전 시스템 모델링 기법을 제안하였다. 이를 기반으로 풍력발전 시스템의 성능 해석을 위한 시뮬레이터를 개발하였다. 그리고 다양한 시뮬레이션을 통해 제안된 풍력발전 시스템 모델링 기법과 시뮬레이터의 타당성을 검증하였다.

• 한국산업융합학회 논문집
• /
• 제26권6_1호
• /
• pp.993-999
• /
• 2023

In this paper, a novel polishing tool mechanism with 3-axis compliance is presented, which consists of 2-axis rotational and 1-axis linear compliances in series. The 2-axis rotational compliance mechanism is made up of four cantilever beams for adjusting rotational stiffness and one flexure universal joint at the center for constraining the z-axis deflection. The 2-axis rotational compliance can mechanically adjust the polishing tool to machined surfaces. The polishing press force can be simply controlled by using a linear spring along the z-axis. The 2-axis rotational and 1-axis linear compliance design is decoupled. The stiffness analysis of the 2-axis compliance mechanism was performed based on link compliance matrix and rigid body transformation. A 3-axis polishing tool was designed by configuring the 2-axis compliance mechanism and one linear spring.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.25-28
• /
• 1996

This paper addresses the issues and difficulties encountered in developing a 12-axis measurement system for the assessment of whole-body vibration exposed from the body contact area. The contents of related survey work and the ideas from Professor Griffin in ISVR, that have led to its successful development, are introduced here. The developed 12-axis measurement system is shown to satisfy the international standards of ISO 2631 and BS 6841 in EC. This system is expected to play a key role in assessing the ride quality of passenger cars that is rapidly becomes much interest in Korean car-makers and tyre-makers.

• 에너지공학
• /
• 제24권3호
• /
• pp.128-134
• /
• 2015

본 연구는 연성체와 강체로 구성된 다물체 시스템을 분석한 것이다. 이송용 로봇은 주로 빠른 속도와 넓은 범위의 이동거리의 장점으로 무거운 부품으로 구성된 자동화산업에 사용된다. 주로 3축으로 구성되어 사용되는 이송용 로봇은 커다란 부하를 담당하기 위해 최근에 강도와 강성을 고려하여 개발되어진다. 따라서, 이러한 목적으로 과도모드가 적용된 동적해석을 수행하여 어느 시간과 위치에서 항복되는지 찾기 위해 수행되었다. 이러한 연구의 결과로 로봇의 응력과 변형량을 분석할 수 있었다.