• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1475-1477
• /
• 2001

In odor to set high saturation magnetization and coercivity, it had need to orient axis of easy magnetization of CoCr-based thin film perpendicular direction(c-axis) to the substrate plane. It was known that crystalline orientation of CoCr-based thin film was improved by introducing underlayer like Ti, Ge. We prepared singlelayer and double layer with Si underlayer by Facing Targets Sputtering System. As a result, intensity and c-axis dispersion angle ${\Delta}{\theta}_{50}$ of singlelayer were improved with increasing film thickness. Also, it was found that CoCr/Si and CoCrTa/Si double layer showed good c-axis dispersion angle due to introducing Si.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.396-398
• /
• 2009

Scoliosis is a three-dimensional deformity caused by lateral curvature of the spine. The existing braces used to correct the posture were some drawbacks such as inconvenience, tightness as well as unfitness to wear. In this study, we devised a posture guidance system in order to monitor a posture continuously and lead to pose correctly and a new method fur measuring a Cobb's angle value in third dimension based on two 3-axis accelerometers. As a result, the correlation coefficients between desired and measured angles were and standard error between desired and measured angles were 0.99, 1.32(x-axis), 0.99 and 1.10(y-axis), respectively. The devised system showed good potential for the optimal posture guide and an early detection of scoliosis.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.98-104
• /
• 2020

In this work, a study on the 5-axis machining of ball gear cam is conducted which is a continuation of reference [1]. The ball gear cam used in this study delivers motion in conjunction with the ball supported by the turret. Therefore, it requires carbonizing heat treatment and is usually completed using a 4-axis machining with a carbide ball end mill. If the nose part of the ball end mill is not allowed to participate in the machining, then CBN tools without the nose part can be used. However, machining of certain shapes can be carried out only by contacting the ball in some of the areas on either side which can improve the surface of the machining. This requires a 5-axis machining in order to maintain a constant angle for the processing path. Therefore, in this work, the 5-axis machining method is studied in order to maintain the direction of the cutter axis at a constant angle with the tangent direction of the curve-ball gear cam. Furthermore, the 5-axis machining program for the ball gear cam was developed and the machining experiment was completed and verified.

• 한국화재소방학회논문지
• /
• 제27권5호
• /
• pp.75-79
• /
• 2013

임신부의 경우 심폐소생술동안 좌측 기울림을 적용하도록 권장하고 있다. 하지만, 이 좌측으로 기울리면 임신부의 자궁 뿐만이 아니라 좌심실도 좌측으로 편위되어 심폐소생술의 심장펌프기능이 떨어질 가능성이 있다. 이에 좌측 기울림이 심폐소생술동안 흉골 운동 방향을 대변하는 전후축과 좌심실의 공간적 관계에 미치는 영향을 알아보고자 하였다. 컴퓨터 단층촬영을 이용한 가상내시경검사를 받은 90명의 환자를 대상으로 의무기록과 컴퓨터단층촬영결과를 후향적으로 조사하였다. 가상내시경은 앙와위와 좌측 기울림 위치 모두에서 실시되었다. 좌심실 단면적이 가장 넓은 축면에서 전후축과 좌심실축사이의 각도($Angle_{AP-LV}$), 전후축과 좌심실 중앙사이 최단거리($D_{AP-MidLV}$), 및 전후축과 좌심실첨부사이 최단거리($D_{AP-Apex}$)를 측정하였다. 대상환자 중 87명(96.7%)에서는 앙와위에서 좌심실이 전후축의 좌측에 위치하였다. 좌측으로 기울인 영상에서의 기울림 각도는 $43.4{\pm}11.0^{\circ}$였다. $D_{AP-MidLV}$와 $D_{AP-Apex}$는 좌측 기울린 위치에서 의미있게 길었지만 (p<0.001), AngleAP-LV는 두 자세 사이에 비슷했다. 심장정지인 임신부에서 좌측으로 기울림은 흉부압박의 심장펌프 효과를 떨어뜨릴 수도 있다.

• 한국운동역학회지
• /
• 제13권2호
• /
• pp.49-63
• /
• 2003

For this study, four male university Taekwondo players were randomly chosen, between the weight categories of 60Kg and 80Kg. Their side kicks (yeop chagi), which are part of foot techniques, were kinematically analyzed in terms of the time, angle, and angular velocity factors involved with the kicks through the three-dimensional imaging. The results of the analysis are as fellows. 1. Time factor The first phase(preparation) was 0.48sec on average, accounting for 60% of the entire time spent; the second phase(the minimum angle of the knee joint) was 0.21sec on average, taking up 26% of the whole time spent; and the third phase(hitting) was 0.11sec on average, representing 14% of the entire time spent. 2. Angle factor In the first phase(preparation), rotating their bodies along the long axis, the players bended their hip and knee joints a lot, by moving fast in the vertical and horizontal directions, in the second phase(the minimum angle of the knee joint), the players continued to extend their bodies along the vertical axis, while pronating their lower legs and bending their hip and knee joints a lot to reduce the radius of gyration, and in the third phase(hitting), they extended their knee joints greatly so that the angle movements of their lower bodies shifted to circle movements. 3. Angular velocity factor In the first phase(preparation), the angular velocity of the hip and knee joints increased. while moving horizontally and rotating the body along the long axis; in the second phase(the minimum angle of the knee joint), the angular velocity increased by bending the hip and knee joints fast to reduce the rotation radios; and in the third phase(hitting), the angular velocity was found to have increased, by rotating the body along the long axis to increase the angular velocity and shifting the angular momentum of the pronated knee joint to the circular momentum.

• 대한치과교정학회지
• /
• 제8권1호
• /
• pp.27-37
• /
• 1978

In order to know the variation of the associated craniofacial skeletal angle and linear distance according to the change of gonial angle, the roentgenographic cephalo metric study was undertaken in Korean normal cephalometric analysis and eletric computer. The fallowing results were optained. 1) The size of gonial angle is mainly depend on the lower gonial angle. The mean of upper gonial gngle is almost same in normal occlusion group$^*$ and malocclusion group. 2) It was resulted on normal group and malocclusion group by F test that the number of parameters that were significant at 5% level of confidence were 14 parameters in normal occlusion group and 22 parameters in malocclusion group. 3) Ramus height and mandibular body length increased and facial ratio is decreased as gonial angle decreased. 4) MP-T, overbite depth and Y-axis angle is not related to gonial angle in normal occlusion group, but in moloclusion group, as gonial angle decreased, MP-T and overbite depth is increased and Y-axis angle is decreased. 5) SN-MP, OP-MP, PP-MP is increased as gonial anglel increased, it was mainly depend on the lower gonial angle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1467-1470
• /
• 2008

An upper tibial opening wedge osteotomy is an operation to cure a malalignment and a degenerate arthritis. To prevent the postoperative malalignment caused by the upper tibial opening wedge osteotomy, the research to define the relationship between a Hinge Axis Angle and a Posterior Slope Angle is needed. The effect of the relationship between the hinge axis angle and the gap angle on the posterior slope angle is studied. After 3-D Compute Tomography (CT) scanning image is reconstructed, the virtual surgery is performed by the reconstructed 3-D tibia model. It was proved that the relationship between the hinge axis angle and the gap angle were constant and the simple mathematical model could be derived. To verify the suggested mathematical model, it compared with the measured data from the virtual surgery. In conclusion, while the deviation between the data from the virtual surgery and ones of the mathematical model under the gap angle<$10^{\circ}$ was less than 1%.

• 대한치과교정학회지
• /
• 제25권4호
• /
• pp.453-463
• /
• 1995

측모두부 방사선 계측사진에서 일반적으로 사용하는 상악 중절치의 장축은 치근첨(Root Apex)과 절치단(Incisor Edge)를 연결한 선을 사용하지만 일부 부정교합 환자에서는 치관장축과 치근장축이 일치하지 않는 경우가 있으며 이 경우 두장축이 이루는 각을 치관-치근각도(Collum Angle)라 하며, 이 각도는 교정치료의 진단 및 치료과정에 고려되어져야 한다. 본 연구에서는 제 I 급 부정교합 환자 31명, 제 II급 1류 부정교합 환자 30명, 제 II 급 2류 부정교합 환자 31명, 제 III급 부정교합 환자 31명에서 치관-치근 각도를 계측하여 부정교합과의 상관관계를 알아보았으며, 측모두부 방사선 계측사진에서 사용되는 항목들과의 상관분석을 통하여 다음과 같은 결론을 얻었다. 1. 부정교합 분류에 따른 치관-치근 각도의 평균값은 제 I 급 부정교합에서는 $3.11^{\circ}{\pm}3.54^{\circ}$, 제 II급 1류 부정교합에서는 $1.23^{\circ}{\pm}2.41^{\circ}$, 제 II급 2류 부정교합에서는 $3.77^{\circ}{\pm}4.39^{\circ}$, 제 III급 부정교합에서는 $3.90^{\circ}{\pm}4.08^{\circ}$ 이었다. 2. 제 II급 1류 부정교합군의 치관-치근 각도와 제 II급 2류, 제 III급 부정교합군의 치관-치근 각도에 유의성 있는 차이가 나타났다. 3. 치관-치근 각도와 측모두부 방사선 계측사진에서 사용되는 다른 항목들과의 상관관계에서 제 I급 부정교합에서는 IMPA, 제 II급 1류 부정교합에서는 Wits, 제 II급 2류 부정교합과 제 III급 부정교합에서는 Overbite이 가장 큰 상관성을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.165-165
• /
• 2000

The sunlight tracking and reflexing system can be divided into two parts. One is a sunlight tracking system and the other is a sunlight reflexing system. The sunlight tracking system detects an azimuth angie and an elevation angle of the sun using 2-axis sensor sun tracker. The sunlight reflexing system controls a reflection mirror to be reflected a sunlight at the target area after getting the azimuth angle and the elevation angle of the sun from the sunlight tracking system. We applied the fuzzy PID controller to control the reflexing mirror.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.34.2-34.2
• /
• 2011

Wind guide can be installed on the top of buildings to collect wind. In this study, optimum shape of wind guide is developed, and proposed to combinate with the vertical wind turbine. Impact of parameters for wind guide is analyzed with several cases planned by Taguchi test plan. Front angle, rear angle, and roof angle are selected as key variables and changed into four different levels. By the experimental plan, totally, 64 cases are reduced to 16 cases of analysis. With optimum design of wind guide, the installed vertical axis wind turbines can be operated with maximum power output.