• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.321-324
• /
• 2011

지상연소시험용 소형 액체로켓엔진 초음속 노즐의 성능해석을 위하여 노즐내 유동특성 및 플룸 구조를 $k-{\omega}$ SST모델을 사용한 Reynolds-averaged Navier-Stokes 방정식으로 해석하였다. 해석기법의 검증을 위하여 2차원 축소-확대 노즐 초음속 유동의 해석값과 실험치를 비교하고, 검증된 기법으로 2차원 축대칭 노즐의 성능해석을 수행하였다. 그 결과 노즐 내부에 유동박리 및 역류현상의 발생이 확인되었으며, 이 해석결과는 소형 액체로켓엔진 노즐 최적설계에의 기초자료로 제시되었다.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.9-16
• /
• 2012

This paper presents the numerical results of a simulation of the free surface flow around a blunt bow ship model and focuses on the validation of the proposed method with a brief investigation of the relation between the resistance and free surface behavior. A finite volume method based on the Reynolds Averaged Navier-Stokes (RANS) approach is used to solve the governing flow equations, where the free surface, including wave breaking,is captured by using a two-phase Level-Set (LS) method. For turbulence closure, a two equation k-${\varepsilon}$ model with the standard wall function technique is used. Finally, the numerical results are compared with the available experimental data, showing good agreement.

• 한국전산유체공학회지
• /
• 제22권1호
• /
• pp.8-14
• /
• 2017

In this paper, separated flow characteristics is studied using the RANS(Reynold-averaged Navier-Stokes) modeling. The analysis is performed for the NASA's hump configuration which is the combination of a flat plate and a hump. This configuration was used in NASA's flow control workshop and it was one of validation cases for RANS and LES simulations. The separation occurs at the 65% of model length where a slot is positioned for the flow control. No flow control case and steady suction case are studied using RANS modeling. The Spalart-Allmaras model and the SST(Shear Stress Transport) model are applied and their accuracy are compared. To correlate CFD analysis with experimental data, the optimal boundary condition was investigated and the effect of a cavity around the slot is studied for the no flow case.

• 한국해안해양공학회지
• /
• 제13권1호
• /
• pp.1-8
• /
• 2001

파랑으로 인해 발생되는 흐름은 연안에서 질량수송의 일련의 과정을 야기시키므로 연안유역의 관리에 파랑과 흐름의 상호작용에 대한 정확한 이해가 요구된다. 본 논문은 적응가능한 사면 구조 격자에 근간을 둔 파랑장과 흐름장을 혼합한 수치모델을 기술하였다. 사용한 모델은 쇄파, 천수, 굴절, 회절, 파랑과 흐름의 상호작용, 평균해면의 저하와 상승, 혼합 과정, 바닥 마찰 효과 그리고 해안선에 접한 운동 등을 해석할 수 있다. 주기와 수심으로 평균한 지배 방정식은 단계적으로 엇갈린 사면구조 격자에 적응 가능한 Adam-Bashforth 2차 유한 차분 기법으로 양해적으로 모델화 되었다. 본 모델로부터의 결과는 평면 해변에서 경사 입사파에 의해 발생된 연안류의 실험치와 타당한 일치를 보였다.

• 대기
• /
• 제22권4호
• /
• pp.429-436
• /
• 2012

The performances of the Seoul National University Urban Canopy Model (SNUUCM) under different meteorological conditions (clear, cloudy, and rainy conditions) in summertime are compared using observation dataset obtained at an urban site. The daily-averaged net radiation, sensible heat flux, and storage heat flux are largest in clear days and smallest in rainy days, but the daily-averaged latent heat flux is similar among clear, cloudy, and rainy days. That is, the ratio of latent heat flux to net radiation increases in order of clear, cloudy, and rainy conditions. In general, the performance of the SNUUCM is better in clear days than in cloudy or rainy days. However, the performance in simulating sensible heat flux in clear days is as poor as that in rainy days. For all the meteorological conditions, the performance in simulating latent heat flux is worst among the performances in simulating net radiation, sensible heat flux, and latent heat flux. The normalized mean error for latent heat flux is largest in rainy days in which the relative importance of latent heat flux in the surface energy balance becomes greatest among the three conditions. This study suggests that improvements to the parameterization of processes that are related to latent heat flux are particularly needed.

• 대한기계학회논문집B
• /
• 제26권2호
• /
• pp.245-252
• /
• 2002

Numerical analysis was conducted to characterize particle deposition on a horizontal rotating disk with thermophorectic effect under laminar flow field. The particle transport mechanisms considered were convection, Brownian diffusion, gravitational settling and thermophoresis. The averaged particle deposition velocities and their radial distributions for the upper surface of the disk were calculated from the particle concentration equation in a Eulerian frame of reference for rotating speeds of 0∼1000rpm and temperature differences of 0∼5K. It was observed from the numerical results that the rotation effect of disk increased the averaged deposition velocities, and enhanced the uniformity of local deposition velocities on the upper surface compared with those of the disk at rest. It was also shown that the heating of the disk with ΔT=5K decreased deposition velocity over a fairly broad range of particle sizes. Finally, an approximate deposition velocity model for the rotating disk was suggested. The comparison of the present numerical results with the results of the approximate model and the available experimental results showed relatively good agreement between them.

• 콘크리트학회논문집
• /
• 제21권3호
• /
• pp.377-386
• /
• 2009

ACI life-365 기준확산계수 모델은 NT build 443 방법에 의한 시험 결과들로부터 만들어졌다. 이 방법은 침지기간 동안의 시간평균 확산계수를 구하는 방법이므로 ACI에서는 침지기간 동안의 시간평균 확산계수를 기준확산계수로 정의한 것이다. ACI 모델에서는 재령에 따른 감소효과를 지수함수 형태로 표현하고 있으므로 이를 고려한 ACI 기준확산계수 모델의 수정이 필요하다. 이를 위해 본 연구에서는 염소이온 노출개시기를 고려한 확산방정식의 해석해를 유도하고, 이를 사용하여 NT build 443 방법의 시간평균 확산계수를 기준재령의 확산계수로 변환하였다. 연구결과 life-365 기준확산계수 모델은 기존 값 보다 10% 정도 증가되고 수정되어야 함을 밝혔으며, 이에 따라 NT build 443 방법과 NT build 492 방법의 기존관계를 수정하여 내구수명 평가에 이용할 수 있도록 하였다. JCI 확산계수모델과 ACI 확산계수모델의 직접적인 비교를 위하여 JCI 확산계수모델에 대응하는 기준확산계수를 유도하였으며, 이를 통해 JCI 모델보다 ACI 모델이 더 보수적인 결과를 나타내는 것을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.123-128
• /
• 2002

In this paper, an averaged constitutive model of concrete and reinforcing bars for RC structure and path-dependent Ohsaki's model for soil are applied, and an elasto-plastic interface model having thickness is preposed for seismic analysis of underground RC subway station structure. A finite element analysis technique is developed by applying aforementioned constitutive equations and verified through seismic analysis of underground RC subway station. Then, failure mechanisms of the RC subway station structure under seismic action are numerically derived. Then, failure modes and damage levels of the station are also analytically evaluated for the cases of several designs of the underground RC station.

• Water Engineering Research
• /
• 제4권4호
• /
• pp.175-185
• /
• 2003

A numerical model to analyze dam break flows has been developed based on approximate Riemann solver. The governing equations of the model are the nonlinear shallow-water equations. The governing equations are discretized explicitly by using finite volume method and the numerical flux are reconstructed with weighted averaged flux (WAF) method. The developed model is verified. The first verification problem is about idealized dam break flow on wet and dry beds. The second problem is about experimental data of dam break flow. From the results of the verifications, very good agreements have been observed

• Communications for Statistical Applications and Methods
• /
• 제14권3호
• /
• pp.687-698
• /
• 2007

A normal mixture model with which dependence between classes is incorporated is proposed in order to detect differentially expressed genes. Gene clustering approaches suffer from the high dimensional column of microarray expression data matrix which leads to the over-fit problem. Various methods are proposed to solve the problem. In this paper, use of simple averaging data within each class is proposed to overcome the various problems due to high dimensionality when the normal mixture model is fitted. Some experiments through simulated data set and real data set show its availability in actuality.