• 제목/요약/키워드: averaged flame velocity

검색결과 5건 처리시간 0.017초

가진된 부착화염에서 거대와동의 거동 (Behavior of the Coherent Structure on the Attached Forced Flame)

  • 김대원;이기만
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권2호
    • /
    • pp.259-266
    • /
    • 2009
  • An experimental study was conducted to investigate the effects of forcing amplitude on the flow structure near the nozzle exit of forced jet diffusion flames. The jet was excited up to the blowout occurrence by a considerable large amplitude with a periodic velocity fluctuation at the tube resonating frequency. In the attached flame regime, we disclosed the very interesting result newly that adding of a moderate forcing amplitude caused the jet flame to become longer in spite of being forced. Particular attention is focused on the turnabout mechanism of vortex roll-up around the elongated flame, which has not been reported previously, and on the inner coherent structure of the forced jet in the attached flame regime. From the velocity and flow visualization results, it was ascertained that the surrounding air due to the occurrence of negative velocity parts was suck into the fuel nozzle. To aid in understanding the rotating phenomenon of coherent structure, we present a schematic diagram of the turnabout mechanism of vortex roll-up. The mechanism of vortex turnabout phenomenon can be easily understood by considering the positive and negative velocity amplitudes about the instantaneous velocity of the forcing flow, as shown in this diagram.

반경방향 다중 채널 내 예혼합 화염의 안정화 특성과 맥동 불안정성에 관한 실험적 연구 (An Experimental Study on the Flame Localization Characteristics and Pulsating Instability in a Radial Multi-channel)

  • 이대근;고창복
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.41-43
    • /
    • 2013
  • In order to simulate and visually observe combustion phenomena in cylindrical radial-flow porous inert media, a radial multi-channel burner, made of transparent quartz plates, was fabricated. Flame stabilization characteristics and its pulsating instability in the burner were experimentally investigated with respect to various mixture flow rates and equivalence ratio. As a result, five different flame behaviors, such as stable flame, pulsating instability, sudden extinction, blowout and unstable extinction, were observed. Mean radial position of circularly arranged multi-flame and its averaged burning velocity were measured and then compared to the freely propagating flame. The multi-flame pulsation frequency is about several tens of Hz and it is supposed to be generated by the heat diffusion enhancement to cold pre-mixture by the intensive gas-solid interaction.

  • PDF

Flow Direction Characteristics in the Vicinity of the Spark Plug in an S. I. Engine

  • Han, Sung-Bin;Chang, Yong-Hoon;Chung, Yon-Jong
    • Journal of Mechanical Science and Technology
    • /
    • 제14권8호
    • /
    • pp.891-899
    • /
    • 2000
  • The flame speed may be decomposed into the burning speed and the flame transport speed. The flame transport speed is affected considerably by the flow direction, variation rate of flow direction, and flow speed in the combustion chamber. Especially, the flow direction and the variation rate of flow direction at the spark plug location during the ignition period have an important effect on the ignition process and the early flame propagation process. We measured the flow direction component and the variation rate of flow direction with a hot wire probe at the spark plug location. It was shown that the representative flow direction of ignition period is the right-vertical direction of crank shaft and it was used to investigate the variation rate of flow direction.

  • PDF

폭발챔버에서 전파하는 화염의 국부 거동 (Local Behaviour of Propagating Flames in an Explosion Chamber)

  • 박달재;이영순
    • 한국안전학회지
    • /
    • 제26권2호
    • /
    • pp.32-35
    • /
    • 2011
  • 다중 장애물을 가지는 폭발챔버에서 전파하는 화염과 국부 장애물의 상관관계를 조사하기 위하여 실험적 연구를 수행하였다. 폭발챔버 높이 235 mm, 단면적 $1,000{\times}950\;mm^2$, 벤트면적 $1,000{\times}320\;mm^2$를 가지는 폭발챔버를 제작하였으며, 30% blockage ratio를 가지는 장애물을 챔버내에 설치하였다. 전파하는 화염과 장애물의 상관관계를 조사하기 위해 고속카메리를 사용하였다. 고속카메라로 얻어진 화염 이미지로부터 장애물 주위의 국부 화염전파 거동은 2가지 다른 방법, 즉 전파하는 화염전면(flame front)의 각 pixel point에서 산정된 평균 화염전파속도와 연소면적 증가(incremental burnt area)/화염전면 길이(flame front length) 관점에서 분석하였다. 분석결과, 2가지 방법으로 얻은 결과는 거의 일치하는 경향을 나타났으며, 전파하는 화염이 장애물의 전면과 상호 작용할 때 화염속도는 급격히 증가하다가 장애물의 후단면에서 약간 감소하고, 화염이 장애물 후단에서 재결합될 때 다시 급격히 증가하였다.

재순환영역을 가지는 연소기내의 연소유동해석 (Analysis of Flows in the Combustor with Recirculating Flow Regime)

  • 신동신;허남건
    • 한국추진공학회지
    • /
    • 제1권2호
    • /
    • pp.22-31
    • /
    • 1997
  • 비직교 일반좌표계를 사용하는 범용 연소유동해석 프로그램을 개발하여 재순환영역을 가지는 연소유동 등을 해석하였다. 본 프로그램은 유한체적법에 근간을 둔 비엇갈림격자계를 사용하며 직교좌표 속도성분을 종속변수로 하였다. 연소모델은 무한반응속도의 1단계 비가역 반응을 고려하였으며, 밀도가중평균된 지배방정식을 고려하였다. Conserved Scalar의 확률밀도함수를 clipped gauss 분포로 가정하였다 본 프로그램을 사용하여 재순환영역을 가지는 난류확산화염을 계산하였다. 계산결과는 실험결과와 마찬가지로 두개의 재순환영역을 보였으며, 속도, 난류운동에너지, 온도 및 농도 등이 실험결과와 양호하게 일치하는 결과를 얻을 수 있었다.

  • PDF