• 대한전자공학회논문지TC
• /
• 제48권5호
• /
• pp.46-53
• /
• 2011

유한한 기판크기가 E-평면으로 배열된 선형 위상 배열 안테나의 방사 특성에 미치는 영향을 연구하였다. 여러 가지 기판 크기에 따른 active reflection coefficient 와 average active element pattern 으로부터 선형 배열안테나의 방사특성을 예측하였다. E-평면과 만나는 기판 가장자리까지의 거리 변화가 H-평면과 만나는 기판 가장자리까지의 거리 변화에 비해 위상 배열 안테나의 방사 패턴 특성에 미치는 영향이 큰 것을 알 수 있었다.

• 대한치과교정학회지
• /
• 제21권2호
• /
• pp.367-397
• /
• 1991

This study was aimed to investigate the occlusal plane inclination in relation to the skeletal and dental assessment measurements in order to provide a reference in orthodontic treatment planning as the occlusal plane should be reconstructed orthodontically or gnathologically. The sample consisted of 73 normal occlusions and 113 malocclusions of adults. The computerized statistical analysis of 38 occlusal plane's and 29 skeletal and dental measurements were carried out with SPSS. The conclusions were as follows; 1 In normal occlusion, COP-NaPog was average $83.63^{\circ}$ (2.44) and occlusal plane inclination had a strong negative correlation with SNB and FH-NaPog. 2. In normal occlusion, ArANS plane was nearly parallel to the occlusal plane. 3. In malocclusion, the larger the mandibular plane angle and the shorter the ramus height was, the more downward the occlusal plane had a tendency to tip anteriorly. 4. Occlusal plane was more horizontal in deep bite group, while it was steeper in openbite group. 5. The curve of Spee was severe in deep bite group but in openbite group mandibular occlusal plane showed average reverse curvature, where it was found that the configuration of the occlusal plane contributed to the excess or deficiency of anterior overbite.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.61-62
• /
• 2006

The suppression of fluid force acting on a square prism near plane wall was studied by attaching fences on the comers of the prism. The height of the fence was 10% of the square width and the range of Reynolds number considered was $Re=2.0{\times}10^4$. The experimental parameters were the attaching position and numbers of fences, the space ratios $G/B(G/B=0.1{\sim}1.2)$ between prism and plane wall. The average drag coefficients were increased and the average hit coefficients were decreased and increased with the space ratios foulard plane wall. The drag of the prism was reduced average 7.6% with the space ratios by attaching the normal fence at the rear and upper comer and the horizontal normal fence at the rear and lower corner on the prism.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2567-2572
• /
• 2007

The suppression of fluid force acting on a square prism near plane wall was studied by attaching fences on the corners of the prism. The height of the fence was 10% of the square width and the range of Reynolds number considered was Re=$2.0{\times}10^4$. The experimental parameters were the attaching position and numbers of fences, the space ratios G/B(G/B=0.1${\sim}$1.2) between prism and plane wall. The average drag coefficients were increased and the average lift coefficients were decreased and increased with the space ratios toward plane wall. The drag of the prism was reduced average 7.6% with the space ratios by attaching the normal fence at the rear and upper corner and the horizontal normal fence at the rear and lower corner on the prism. In this case, the separated flow at the front and upper corner was reattached on the upper side of the prism and the vortex streets between the prism and plane wall were appeared more slowly than that of prism without fences.

• 한국전자파학회논문지
• /
• 제13권9호
• /
• pp.956-963
• /
• 2002

본 논문에서는 SIR(Stepped Impedance Resonator) 구조를 이용한 compact한 slit-folded형 마이크로스트립패치 안테나를 제작하였다 기존의 길이 방향의 $\lambda_{g}/2$ 공진을 이용한 평면형 마이크로스트립패치 안테나를 길이방향 중심에서 반으로 접어서 마이크로스트립 급전선으로 급전하여 전방향성 방사패턴을 얻은 Folded형 마이크로스트립 안테나를 적층형으로 제작시 급전선의 영향을 줄이기 위하여 급전방법을 상하면 패치사이의 접지면 위에 설계하여 급전핀을 세웠다. 또한 평면형 H형 SIR 구조를 Folded형 안테나에 적용한 슬릿 folded형 안테나는 기존의 folded형 안테나에 비하여 27.5 % 더 소형화하였다. 기존의 folded형 마이크로스트립 안테나는 E면(zx-plane)과 H면(xy-plane)의 평균이득이 거의 1.8 dB 정도의 차이를 보였으나 본 논문에서 제안한 슬릿 folded형은 E & H-plane의 평균이득차이가 0.1 dB로 거의 같음을 알 수 있다.

• Journal of information and communication convergence engineering
• /
• 제10권1호
• /
• pp.1-4
• /
• 2012

Given separated points divided by a line, called a wall, in a plane, we aim to make a gate in the wall to connect the separated points to each other. In this setting, the problem is to find a location for the gate that minimizes the average distance between the points. The problem is a variant of the well-known facility location problem, which is extensively studied in the fields of operations research, location theory, theoretical computer science, and so on. In this paper, we consider the $L^1$-distance of the points in the plane. The points are projected onto the wall and so the problem is transformed to a proximity problem of points on a line. Then it is shown that the transformed problem is related to the weighted median problem of points on the line. Therefore, we obtain an O(n log n)-time algorithm to solve our problem.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권5호
• /
• pp.375-379
• /
• 2010

Introduction: In the management of dentofacial deformities, variable movement of the maxilla can be made possible by a Le Fort I osteotomy. Posterior impaction of the maxilla necessary for rotation of the maxillomandibular complex enhances the functions and esthetic results. In cases of posterior impaction of the maxilla, an increase in the figure of the occlusal plane angle and incisor inclination can occur. This study reports the relationship between the amount of posterior impaction and the change in the occlusal plane angle and incisor inclination in a Le Fort I osteotomy by preoperative and postoperative lateral cephalograms. Materials and Methods: Twenty patients who had undergone orthognathic surgery in Dong-A University Medical Center participated in this study. Lateral cephalometrics, within 3 weeks prior to surgery and 3 days after surgery, were used for analysis. Pre and postoperative measurements of the occlusal plane angle and incisal inclination based on the Frankfort horizontal (FH) plane were performed. X and Y were defined as the amount of vertical change in the upper incisor tip and the amount of vertical change in the upper first molar mesial cup tip through the operation. The amount of final posterior maxillary impaction was determined by subtracting Y from X, which is the difference in vertical height. According to the amount of posterior maxillary impaction, the change in the occlusal plane angle and incisal inclination was measured. Results: The average posterior maxillary impaction was 2.91 mm and the average change in the occlusal plane angle and incisal inclination was $6.54^{\circ}$after surgery. As a result, each mm of posterior maxillary impaction changed the occlusal plane angle and incisal inclination by $2.25^{\circ}$. Statistically, there was high significance. Two cases were observed: one with the same amount of posterior maxillary impaction performed on both the right and left showing $2.20^{\circ}$, and the other with a different amount of posterior maxillary impaction performed showing $2.35^{\circ}$. In this case, there was no significance difference between the two cases. Conclusion: Each mm of posterior maxillary impaction changes the occlusal plane angle and incisal inclination by an average of $2.25^{\circ}$. In posterior maxillary impaction, there was no significant difference in the amount of change in the occlusal plane angle and incisal inclination regardless of whether there was an equal amount of posterior maxillary impaction on both sides. This study is expected to help in the presurgical orthodontic preparation and presurgical treatment planning.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권2호
• /
• pp.143-148
• /
• 2009

Introduction: To correct abnormal occlusal plane by orthognathic surgery, we need to have clear criteria for therapeutic occlusal plane. Authors introduced the concept of individualized ideal occlusal plane(Y-plane), which is determined by the size and form of the mandible, and the ideal incisor tip considering upper and lower lip. Authors studied the following to verify if the actual occlusal plane of the patients with optimal jaw relationship corresponds with the individualized ideal occlusal plane. Patients: We reviewed 44 patients who have normal occlusion visitied in the Dept. of orthodontics, Pundang CHA hospital. Methods: We evaluated if there are agreement between individualized ideal occlusal plane(Y plane) and occlusal plane of actual patients. And we confirmed if tested group has a normal face by measuring FABA, FMA, AB-LOP. Results: There were no significant differences of FABA, FMA, AB-LOP, Mo-Y plane between male and female. FABA, FMA and AB-LOP were included in the normal value. Average distance of Mo-Y plane was $0.75{\pm}0.78mm$. Conclusion: Individualized ideal occlusal plane may be applied to orthognathic surgery.

• 정보학연구
• /
• 제6권1호
• /
• pp.65-70
• /
• 2003

본 논문에서 우리는 변압기의 부분방전형태를 진단하기위하여 새로운 방법을 제시하였다. 웨이블렛 변화을 위하여, 다우비치 필터가 사용되어졌다. 우리는 3개의 전극 종류(침대평판자극, IEC전극, 보이드 전극)마다 고주파 전류신호에 관한 통계적인 특징 파라메터(최대값, 평균값, 분산, 왜도, 첨쇄도)를 추출하기위하여 사용하였다. 역시 이들 계수들은 변압기내 내부부분방전의 신호의 정체를 알기위하여 사용되어졌다. 그 결과로서 고주파전류신호의 진폭과 평균값의 비교로부터 우리는 IEC electrode> Void electrode> Needle-Plane electrode의 결과를 얻었다. 반면에 왜도와 첨쇄도의 경우, 우리는 Void electrode> IEC electrode> Needle-Plane electrode을 얻었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권3호
• /
• pp.229-237
• /
• 2000

According to the functional matrix theory, Delaire proposes that individual occlusal plane was determined by variable effects of teeth, maxilla, mandible, cranium, cranial base and soft tissue matrix including the orofacial musculature. and that there is the ideal occlusal plane determined by the most proper spatial position of maxilla and mandible, functionally and esthetically. This study was designed to find out the relation between Delaire's ideal occlusal plane and muscle activity of masticatory muscles in individuals who have normal maxillo-mandibular relationships. Lateral cephalometric radiographs were taken and his/her individual occlusal plane and ideal occlusal plane were analyzed with Delaire's architectural and structural craniofacial analytic method. For evaluation of muscle activities of masticatory muscles, electromyography of anterior temporal muscle, superficial masseter muscle, and anterior belly of digastric muscle was recorded in fifty Korean normal Angle class I occlusion individuals. According to the average value of ideal occlusal plane, fifty normal Angle class I occlusion individuals were classified into three groups: Ideal occlusal plane group(I group), hyperrotation group(I+ group) and hyporotation group(I- group). The result of this study was as follows: 1. The results of Delaire's architectural and structural craniofacial analysis of lateral cephalography of the fifty Korean normal Angle class I occlusion individuals are that twelve persons(24%) have consistent or parallel with ideal occlusal plane and the average of angular difference was $1.22^{\circ}{\pm}3.69^{\circ}$. 2. There is no significant difference in muscle activities of masticatory muscles during resting(p<0.05), but significant increases of muscle activity of ipsilateral anterior temporal and masseter muscle, contralateral anterior belly of digastric muscle during unilateral chewing and of anterior temporal and masseter muscle during bilateral clenching(p<0.05). 3. To find out the effect of the angular difference between Delaire's ideal occlusal plane and real occlusal plane to muscle activity, muscle activities of masticatory muscles were compared with three groups in each other; I group, I+ group and I- group. The results were no significant differences during resting, unilateral chewing and bilateral clenching.(p>0.05) 4. Although there is no significant differences of masticatory muscle activities among the three groups, the fact that increasing tendency of masseter muscle activity of ideal occlusal plane group(I+) than those of any other groups(I+ and I-) during bilateral clenching was noted. There is only the implication that occlusal plane makes some effects on masticatory muscle activities, espacially that of masseter muscle during bilateral clenching. In conclusion, the hypothesis that occlusal plane is one of the factors which affect the muscle activities of masticatory muscles and that anyone whose occlusal plane consistent with Delaire's ideal occlusal plane has an extraordinary functional advantage in masticatory muscle function cannot be proven with electromyography methods.