• Macromolecular Research
• /
• 제8권5호
• /
• pp.243-245
• /
• 2000

can be determined from the number and weight average molecular weight. When the value of the exponent, a, appearing in the relation between the intrinsic viscosity and the viscosity average molecular weight, is in the range from 0.6 to 0.8, as is the case for the most polymers, the viscosity average molecular weight is much more close to the weight average molecular weight than to the number average molecular weight.

• 분석과학
• /
• 제8권4호
• /
• pp.465-468
• /
• 1995

Matrix assisted laser desorption ionization in mass spectrometry is a fast and accurate method to determine the molecular weight of natural and synthetic polymers. Unknown peptides such as elastase inhibitor and $\small{D}$-hydantoinase were analyzed using sinapinic acid as matrix and their molecular weights were compared with the results from protein sequencer and gel filtration chomatography, respectively. Synthetic polymers such as polyethyleneglycol, polypropyleneglycol, polydimethylsiloxane, and polystyrene were analyzed using matrices such as 2,5-dihydroxybenzoic acid, 4-hdroxyazobenzenecarboxylic acid, and 2-nitrophenyl octyl ether. Average molecular weights of polystyrene were compared with molecular weights by gel permeation chromatography.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1310-1314
• /
• 1998

The oligo(methylsilene) (1) was treated with the group 4 metallocene Cp2MCl2/Red-Al (M = Ti, Zr, Hf) combination catalysts and with the group 6 metal carbonyl M(CO)6 (M = Cr, W) catalysts, producing the modified, cross-linked polymers. The average molecular weights and percent ceramic residue yields of modified polymers increase as the catalyst goes down from Ti to Hf and similarly as the catalyst goes down from Cr to W. An interrelationship between average molecular weights and percent ceramic residue yield is found within the respective group of catalysts, but is not observed as the catalyst goes down from Ti to W. The polymers modified with the group 4 metallocene combination catalysts have higher molecular weights and similar percent ceramic residue yields as compared to the polymers modified with the group 6 metal carbonyl catalysts. The catalytic activities of group 4 metallocene combinations appear to be higher -100 ℃, but to be lower at very high temperature than those of group 6 metal carbonyls.

• 한국식품과학회지
• /
• 제22권7호
• /
• pp.805-811
• /
• 1990

대두단백질의 기능성을 개선하기 위하여 고정화된 트립신 및 키모트립신으로 가수분해시킨 후, 이 대두단백 가수물의 기능성을 조사하였다. Ferguson plot으로부터 가수분해물의 평균분자량 및 평균전하를 계산하여 대두단백의 기능성을 나타내는 인자로 이용하였다. 즉, 단백질의 평균분자량을 평균전하로 나눈 값은 단백가수물의 용해도, 포수력, 포유력, 유화도 등의 기능성을 예측하는데 이용될 수 있었다. 이 분자비가 낮으면 용해도는 향상되었으나 포수력은 감소되었으며 중간범위일 경우 포유력과 유화도는 증가되는 경향을 나타냈다.

• Bulletin of the Korean Chemical Society
• /
• 제28권5호
• /
• pp.847-850
• /
• 2007

• Macromolecular Research
• /
• 제9권5호
• /
• pp.277-284
• /
• 2001

Poly(exo-3,6-epoxy-1,2,3,6-tetrahydrophthalic anhydride)s [poly(ETA)s] and poly($\alpha$-ethoxy-exo-3,6-epoxy-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil)s [poly(EETFU)s ] with various average molecular weights were prepared by photopolymerizations. The number average molecular weights of the fractionated poly(ETA)s and poly(EETFU)s determined by GPC were in the range of 3,600∼21,000 and 3,600-33,400, respectively. The release rate of 5-FU from poly(EETFU) decreased with increasing average molecular weight. The in vitro cytotoxicity of poly(ETA) against a normal cell line was lower than that of 5-fluorouracil(5-FU), The in vivo antitumor activities of the synthesized samples at dosage of 0.8 mg/kg against mice bearing sarcoma 180 tumor cell line decreased in the following order: poly(EETFU) > poly(ETA) > EETFU > ETA > 5-FU. The antiangiogenic activities of the poly(ETA)s were better than those of 5-FU.

• 한국인쇄학회지
• /
• 제7권1호
• /
• pp.65-72
• /
• 1989

Modified phenolics can have a retarding effect on the gelation of wood oil. Modified phenolic resins can be used in media for paint, varnishes, primers, overprinting varnishes, litho, letterpress and rotogravure inks. Varnishes based on rosin phenolic are faster drying, have better durability, are harder and glosser, and have greater resistance to water than ones based on ester gums. These physical properties is concerned with molecular weight distribution of rosin modified phenol resin. This paper was studied about molecular weight distribution of rosin phenolics which were prepared between $130~250^{\circ}C$. The results were as follows: 1) Average molecular weights inereased with increasing reaction temperature. 2) $M_w/M_n$ were from 3.43 to 46.44 with increasing reaction temperature and so the molecular weight distributions were changed from random distribution to broad distribution. 3) The relation ship between intrinsic viscosity and weight average molecular weight was follows: $[{\;}{\;}]={\;}1{\times}{\;}10^{-6}M_w,{\;}M_w=M_w$ 4) Esterification reaction between the acid group of rosin and polyol was started about $230^{\circ}C$$.

• Elastomers and Composites
• /
• 제45권2호
• /
• pp.122-128
• /
• 2010

소수성실리카를 안정제로 하는 현탁중합반응법을 이용하여 합성한 스티렌(St)/부틸메타크릴레이트(BMA) 공중합체 (co-PSB) 입자의 전단점도를 모세관 레오미터 (capillary rheometer)를 이용하여 $170^{\circ}C$에서 측정하였다. co-PSB 입자의 전단점도는 중량평균분자량이 74,800 g/mol 이하인 경우 낮은 전단속도에서는 뉴톤거동을 보였다. 중량평균분자량이 136,800 g/mol을 초과하면서 전단점도는 전단속도의 전 영역에 걸쳐 감소하였고 전단속도에 대한 기울기의 절대값은 분자량의 증가와 함께 증가하였다. St/BMA의 구성비가 7/3, 5/5 및 3/7의 co-PSB 입자는 유사한 분자량을 나타내었지만 BMA의 구성비가 증가하면서 유리전이온도와 전단점도는 감소하였다. St/BMA의 구성비가 1/9 인 co-PSB의 경우 유리전이온도는 더욱 감소하였으나 초기 전단점도는 크게 증가하였다. 카본블랙을 함유하는 co-PSB 복합체 입자의 전단점도는 카본블랙의 증가에 따라 증가하였으나, 카본블랙의 농도에 따른 전단점도의 변화는 분자량 및/혹은 구성비의 변화 효과에 비교하여 미약하였다.

• Elastomers and Composites
• /
• 제49권3호
• /
• pp.232-238
• /
• 2014

수용성 단량체인 아크릴산 (AA)을 단량체로 potassium persulfate (KPS)를 개시제로 이용하여 $60^{\circ}C$에서 $90^{\circ}C$ 사이의 선택된 온도에서 물을 반응매체로 하여 용액중합을 진행하였다. 아크릴산의 농도가 감소하거나 개시제의 농도가 증가하면 분자량은 감소하였다. 중합반응온도를 상승하면 폴리아크릴산 (PAA)의 분자량은 감소하였다. 대부분의 중합반응에서 분산성지수는 1.5 에 근접하는 것으로 관찰되었다. 교반속도가 증가하면서 400 rpm에서 분자량은 최고값을 나타낸 후, 교반속도가 800 rpm에 이르면서 수평균 및 중량평균분자량은 감소하였다. 유리전이온도는 분자량에 따라 크게 변하지 않았으며 $113^{\circ}C$에서 $116^{\circ}C$ 사이의 값을 나타내었다.

• 한국포장학회지
• /
• 제9권1호
• /
• pp.19-24
• /
• 2003

We study on the phase diagram of the polymer blend. For this purpose, one PS (polystyrene) and two PI(polyisoprene) were employed whose molecular weights were low enough to make the experimental determinations possible. The weight-average molecular weight(Mw) of PS was 2514, and Mws of two PIs were 2700. Interaction energy density (IED) of the Flory-Huggins lattice theory was defined as a function of temperature and composition, and the consequent equations for the binodal, and critical points were derived. By fitting the experimental binodal points to the derived binodal curve with a nonlinear regression method, the expression for the IED was determined. And the expression for the IED obtained from this study was compared with those reported in the literatures. Also were discussed the importance of accuracy in the expression the IED, and the IED's dependency on the temperature, composition and molecular weights.