• 대기
• /
• 제30권2호
• /
• pp.169-181
• /
• 2020

We conducted a study on the impact of observation station density; this was done in order to enable the accurate estimation of spatial meteorological variables. The purpose of this study is to help operate an efficient observation network by examining distributions of temperature, relative humidity, and wind speed in a test area of a three-dimensional meteorological observation project in the Yeongdong region in 2019. For our analysis, we grouped the observation stations as follows: 41 stations (for Step 4), 34 stations (for Step 3), 17 stations (for Step 2), and 10 stations (for Step 1). Grid values were interpolated using the kriging method. We compared the spatial accuracy of the estimated meteorological grid by using station density. The effect of increased observation network density varied and was dependent on meteorological variables and weather conditions. The temperature is sufficient for the current weather observation network (featuring an average distance about 9.30 km between stations), and the relative humidity is sufficient when the average distance between stations is about 5.04 km. However, it is recommended that all observation networks, with an average distance of approximately 4.59 km between stations, be utilized for monitoring wind speed. In addition, this also enables the operation of an effective observation network through the classification of outliers.

• Imaging Science in Dentistry
• /
• 제31권2호
• /
• pp.101-107
• /
• 2001

Purpose: To evaluate the precision of measurements of distances and angle in the cross-sectional views of linear tomogram of panorama and to assess the technique for visualizing the mandibular canal. Methods: Ten dry mandibles were radiographically examined with 3 continuous cross-sectional views of linear tomogram of panorama and 4 continuous computed tomograms. The distance between the superior border of canal and alveolar crest and the bucco-lingual width of alveolar bone at the level of the superior border of canal and the angle between the two lines above were measured. Measurements were performed by radiologist and implantologist group and compared with measurements on computed radiograms of the same areas. Results: The measurements differences for the distance of alveolar bone height between in panorama and in CT showed 0.9 mm±0.6 mm by radiologists and 1.3mm±0.8mm by implantologists. There was no statistically significant difference between two groups' measurements. The differences in measurements for the distance of alveolar bone width between in panorama and in CT showed 0.5mm±0.8mm by radiologists and 2.5mm±1.4 mm by implantologists. There was significant difference (P<0.05) between two groups' measurements. The average bucco-lingual inclination of alveolar bone above mandibular canal was average 95.8° in CT. The difference of measurements between two groups was average 1±0.9°. Three cross-sectional views of panorama could show that the mandibular canal crosses antero-lingually and slopes inferiorly from the posterior segment of the mandible. Conclusions: The measurements in the linear tomogram of panorama by radiologists gave the accurate values of the distances and the angle compared with the values in computed tomograms.

• 한국의학물리학회지:의학물리
• /
• 제30권1호
• /
• pp.32-38
• /
• 2019

Purpose: The objective of this study is to evaluate the geometrical accuracy of a patient-specific bolus based on a three-dimensional (3D) printed mold and casting method. Materials and Methods: Three breast cancer patients undergoing treatment for a superficial region were scanned using computed tomography (CT) and a designed bolus structure through a treatment planning system (TPS). For the fabrication of patient-specific bolus, we cast harmless certified silicone into 3D printed molds. The produced bolus was also imaged using CT under the same conditions as the patient CT to acquire its geometrical shape. We compared the shapes of the produced bolus with the planned bolus structure from the TPS by measuring the average distance between two structures after a surface registration. Results and Conclusions: The result of the average difference in distance was within 1 mm and, as the worst case, the absolute difference did not exceed ${\pm}2mm$. The result of the geometric difference in the cross-section profile of each bolus was approximately 1 mm, which is a similar property of the average difference in distance. This discrepancy was negligible in affecting the dose reduction. The proposed fabrication of patient-specific bolus is useful for radiation therapy in the treatment of superficial regions, particularly those with an irregular shape.

• 대한소아치과학회지
• /
• 제49권4호
• /
• pp.453-467
• /
• 2022

이 연구는 지리 정보 시스템을 활용하여 우리나라 소아 전문 치과 병·의원의 접근성을 평가하고 접근성이 가장 좋은 지역과 좋지 못한 지역을 정량적으로 비교, 분석하고자 하였다. 분석 결과 서울에서 가장 높은 정도의 밀집도를 보여주었고, 경북과 전북에서 가장 낮은 정도의 밀집도를 보여주었다. 서울은 10 km 기준에서 모든 행정구역에서 100%의 서비스 면적 비율을 보여주어 서울의 모든 지역에서 수요가 발생할 수 있음을 나타냈다. 하지만 경북, 전북의 경우 절반 이상의 행정구역에서 0%의 서비스 면적 비율을 보여주었다. 초등학교에서 가장 가까운 소아치과 병·의원까지의 거리를 살펴보았을 때 서울은 평균 3.45 km였으나 경북, 전북은 각각 43.66 km, 40.57 km로 서울에 비해 각각 12.66배, 11.76배에 달하는 평균 거리를 보여주었다.

• 인터넷정보학회논문지
• /
• 제20권1호
• /
• pp.39-46
• /
• 2019

This paper investigates the importance of various environmental factors that have a strong influence on strawberry yields grown in greenhouse using the pattern recognition methods. The environmental factors influencing the production of strawberries were six factors such as average inside temperature, average inside humidity, average $CO_2$ level, average soil temperature, cumulative solar radiation, and average illumination. The results of analyzing the observed data using Dynamic Time Warping (DTW) showed that the most significant factor influencing the strawberry production was average soil temperature, average inside humidity, and cumulative solar radiation. Second, the results of analyzing the observed data using Multidimensional Scaling (MDS) showed that the most influential factors on the strawberry yields, such as average $CO_2$ level, average inside humidity, and average illumination were differently given for each farms. However, these results are based on the distance in 3D space and can be deduced from the fact that there is not a large difference between these distances. Therefore, in order to increase the harvest of strawberries cultivated in the farms, it is necessary to manage the environmental factors such as thoroughly controlling the humidity and maintaining the concentration of $CO_2$ constantly by ventilation of the greenhouse.

• 대한치과보철학회지
• /
• 제31권2호
• /
• pp.237-248
• /
• 1993

Although pantograph has been used to investigate whether the determinents of the mandibular movement were possible contributing factors of TMJ click, there was the problems to understand the role of tooth morphology upon the occurrence of click because of using appliance without tooth contacts. There Were advantages to evaluate the effects of tooth morphology upon the mandibular movements, because intraoral tracing device(Functiograph$^{(R)}$) had been obtained maintaining occlusal contact between the upper and lower natural teeth during mandibular movement. The purpose of this study was to record the mandibular eccentric movement quantitatively performed in 20 adult control subjects and 20 adult subjects with TMJ click and to investigate the effects of occlusion upon the occurrence of TMJ click. The obtained results were as follows : 1. The average ICP-P distance was $3.07{\pm}0.73mm$ in subjects with TMJ click, $2.14{\pm}0.85mm$ in control subjects. There was a statistical significance between subjects with TMJ click and control subjects(P<0.001). 2. The average ICP-P distance was $3.07{\pm}1.14mm$ in subjects with TMJ click, $2.61{\pm}0.96mm$ in control subjects. There was a statistical significance between subjects with TMJ click and control subjects(P<0.05). 3. The average distance of right and left lateral movement was not statistically significant between subjects with TMJ click and control subjects. 4. The average lateral displacement from midline during RCP was $0.75{\pm}0.54mm$ subjects with TMJ click, $0.16{\pm}0.17mm$ in control subjects. There was a statistical significance between subjects with TMJ click and control subjects(P<0.001). 5. The average lateral displacement from midline during protrusive movement was $0.88{\pm}0.54mm$ in subjects with TMJ click, $0.20{\pm}0.23mm$ in control subjects. There was a statistical significance between subjects with TMJ click and control subjects(P<0.001). 6. The average angle of right and left lateral movement was $144.2{\pm}20.20^{\circ}$ in subjects with TMJ click, $138.15{\pm}20.09^{\circ}$ in control subjects. There was a statistical significance between subjects with TMJ click and control subjects(P<0.05).

• Reproductive and Developmental Biology
• /
• 제29권4호
• /
• pp.213-221
• /
• 2005

We used nine decamer primers to generate DNA fragment sizes ranging from 100 bp to 1,600 bp from two bullhead (Pseudobagrus fulvidraco) populations of Dangjin in Korea. 376 fragments were identified in the cultured bullhead population, and 454 in the population of wild bullhead from Dangjin: 287 specific fragments $(76.3\%)$ in the cultured bullhead population and 207 $(45.6\%)$ in the wild bullhead population. On average, a decamer primer was used to generate 34.2 amplified products in a cultured bullhead. A RAPD primer was used to generate an average of 3.1 amplified bands per sample, ranging between 2.5 and 6.0 fragments in this population. Nine primers also generated 24 polymorphic fragments (24/376 fragment, $6.4\%$) in the cultured bullhead population, and 24 (24/454 fragments, $5.2\%$) in the wild bullhead population. The OPA-16 primer, notably, produced which 11 out of 11 bands $(100\%)$ were monomorphic in the wild bullhead population. 110 intra-population-specific fragments, with an average of 12.2 per primer, were observed in the cultured bullhead population. 99 fragments, with an average of 11.0 per primer, were identified in the wild bullhead. Especially, 55 inter-population-common fragments, with an average of 6.1 per primer, were observed in the two bullhead populations. The bandsharing value (BS value) of individuals within the wild bullhead population was substantially higher than was determined in the cultured bullhead population. The average bandsharing value was $0.596\pm0.010$ within the cultured bullhead population,. and $0.657\pm0.010$ within the wild bullhead population. The dendrogram obtained with the nine primers indicates two genetic clusters, designated cluster $1\;(CULTURED\;01\~CULTURED\;11)$, and cluster $2\;(WILD\;12\~WILD\;22)$. Ultimately, the longest genetic distance displaying significant molecular differences was determined to exist between individuals in the two bullhead populations, namely between individuals WILD no. 19 of the wild bullhead population and CULTURED no. 03 of the cultured bullhead population (genetic distance = 0.714). RAPD-PCR allowed us to detect the existence of population discrimination and genetic variation in Korean population of bullhead. This finding indicates that this method constitutes a suitable tool for DNA comparison, both within and between individuals, populations, species, and genera.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1358-1361
• /
• 2003

In this study, intrinsic static/dynamic fracture toughness of Al 7175-T74 are evaluated from the apparent static/dynamic toughness of notched specimen. The notch/crack critical average stress fracture model is suggested to establish the relationship to predict the intrinsic fracture toughness from the apparent fracture toughness of a notched specimen. The notch/crack critical average stress fracture model is established using the relation between the notch root radius and the effective distance calculated by finite element analysis. It is conclude that the true fracture toughness can be estimated from test results of apparent fracture toughness measured by using a notched specimen. Also, critical notch root radius can be predicted by notch/crack critical average stress fracture model.

• 한국환경생태학회지
• /
• 제30권2호
• /
• pp.146-154
• /
• 2016

본 연구에서는 야생동물위치추적장치(WT-200)을 이용하여 국내에 월동 번식하는 흰뺨검둥오리 서식지 이용을 파악하여, 우리나라 수조류 서식지 보호 관리의 기초자료로 활용하고자 하였다. 대상지역은 경기도 복하천과 청미천, 충청남도 곡교천, 충청북도 병천천, 전라북도 만경강 등 5개 하천과 제주도 용수저수지 1개 저수지로 흰뺨검둥오리 25개체에 위치추적기를 부착하였다. 25개체중 12개체가 국외이동하였으며, 도착지는 중국, 북한, 러시아였다. 평균 이동거리는 683km이었으며, 최대 1,238km였다. 국내에 잔류한 13개체의 일일 평균이동거리는 $1.0{\pm}0.89km$이었으며, 최대 이동거리는 23.8km이었다. 평균 북상일 이전인 월동기의 일일 평균 이동거리는 0.9km였으며, 최대 14.6km였고, 번식기에는 평균 1.3km, 최대 14.4km이었다. 흰뺨검둥오리는 국내에서 하천을 가장 많이 이용하였으며, 다음으로 논, 밭 저수지 등의 순이었다. 월동기 동안 하천을 가장 많이 이용하였으며, 번식기에는 논을 가장 많이 이용하였다. 월동기 주간과 야간모두 하천에서 이용률이 가장 높았으나, 논과 밭의 이용률은 주간보다 야간에 높았다. 번식기에는 주간과 야간 모두 논의 이용울이 가장 높았으나, 야간에 하천의 이용률이 증가하였고 밭의 이용률이 감소하였다. 논은 하천은 시기에 따라 흰뺨검둥오리의 이용형태가 다른 경향을 보였으며, 대부분 하천과 인접한 논을 이용하였다.

• 한국대기환경학회지
• /
• 제28권3호
• /
• pp.294-305
• /
• 2012

The objective of this study is to estimate the chemical compositions and to identify qualitative sources of fall-out particles in study area. Also, this study used a spatial analysis to estimate spatial distributions and average deposition flux. In this study, the chemical compositions of fall-out particle samples collected at Muncheon lake from May 2010 to January 2011 were analyzed by ICP and IC. The monthly trend of deposition fluxes for fall-out particles showed highest in June ($107.61kg/km^2/day$) and lowest in October ($22.22kg/km^2/day$). The average fluxes of Fe, Si, Al, Zn and Ba are 0.44, 0.24, 0.20, 0.17, $0.09kg/km^2/day$, respectively. Also, the average fluxes of $NO_3^-$, $SO_4^{2-}$, $NH_4^+$, $Ca^{2+}$, and $Na^+$ are 6.48, 5.01, 4.96, 1.75, $1.37kg/km^2/day$, respectively. A Factor analysis identified four sources such as 1) nonferrous metal, motor vehicle, and agriculture, 2) soil, 3) field burning, incineration, and 4) road dust and oil burning. The IDW (inverse distance weighting) spatial analysis method was used to estimate spatial distribution and average deposition flux for fall-out particles. A total average deposition fluxes estimated in Muncheon lake were 936.15 kg/month. The spatial distribution trend of deposition flux showed higher at site 1 and 2 than at site 3, 4 because local road is adjacent to the site 1 and 2.