• 대한방사선치료학회지
• /
• 제27권2호
• /
• pp.123-129
• /
• 2015

목 적 : 본 연구에서는 원격 후 장전치료기를 이용한 근접치료 시, 선원 위치 부정확성의 기하학적 요인인 선원 전달도관의 늘어진 정도를 나타내는 곡률과, 각기 다른 기구의 형태가 선원 위치 재현성에 미치는 영향을 분석하고자 한다. 대상 및 방법 : HDR plus 3.0.5로 선원의 위치 간격 1 cm 씩 10 개의 지점으로 선원이 각 위치에 머무는 시간을 15 초로 하는 치료 계획을 수립하였다. 선원 전달도관(Universal applicator transfer tube)의 늘어짐이 선원의 위치 정확성에 미치는 영향을 파악하기 위하여 선원 전달도관을 MultiSource container에서 GAFCHROMIC$^{(R)}$ EBT3 film 까지 일직선으로 연결한 후, 이 위치부터 MultiSource container를 필름 방향으로 5 cm, 10 cm, 20 cm으로 이동하여 선원의 위치를 측정하였다. 또한 각기 다른 각도를 가진 기구(applicator) 4 종류($0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $65^{\circ}$)에 대해서도 동일한 방법으로 실험을 하였다. 분석을 위해 Image J를 이용하여 선원의 위치 차이 값을 획득하였고 이를 비교 분석하였다. 결 과 : 선원 전달 도관의 형태가 곡률이 없는 일직선일 경우, 형태가 다른 기구의 선원 위치 평균 오차는 기구의 각도가 $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $65^{\circ}$일 때, 각각 0.90 mm, 0.96 mm, 1.66 mm, 1.83 mm로 나타났고, 선원 위치 오차범위 ${\pm}2mm$ 내에 있는 것으로 확인되었다. MultiSource container을 필름 방향으로 5 cm, 10 cm, 20 cm 이동하였을 때 기구 형태 별 선원 위치의 평균 오차는 증가하였고, 그 값은 ${\pm}2mm$를 초과하였다. 또한, 좌표값을 분석한 결과 4 종류의 기구 모두 치료계획 상의 선원 위치보다 윗부분으로 치우치는 방향성을 나타냈다. 결 론 : 선원 위치의 오차는 선원 전달도관의 곡률과 치료 시 사용되는 기구의 형태에 모두 영향을 받는 것으로 나타났다. 선원 전달도관과 기구 모두 직선의 형태를 갖추고 있을 때 선원 위치 오차가 가장 작았다. 본 연구를 바탕으로 근접치료 시, 선원 전달도관의 곡률 발생을 최소화하여 최대한 직선의 형태로 유지시켜야 할 것이며, 치료 시 사용되는 기구의 굴곡이나 폐암의 기관지 내 강내조사와 같이 곡률이 발생할 수밖에 없는 경우에는 선원 위치점검이 선행되어야 할 것으로 사료된다.

• 한국방사선학회논문지
• /
• 제7권5호
• /
• pp.313-320
• /
• 2013

류마티스성 관절염 등의 관절 질환이나 내반 변형 등을 동반한 환자에게 정형외과적으로 인공슬관절 치환술을 시행하는데 수술용 금속정을 삽입할 때 대퇴체부의 휨 정도로 인해 대퇴피질부에 손상을 주거나 2차 골절 등의 부작용을 유발하기도 한다. 이때 대퇴체부의 중심 좌표값을 알면 금속정이 해부학적 모양의 중심으로 삽입될 수 있어 이러한 부작용을 예방할 수 있을 것이다. 본 연구에서는 인공슬관절 치환술이 필요한 10명의 환자와 대퇴골 질환이 없는 정상군 10명의 대퇴부 단층촬영영상을 이용하여 3차원 좌표값을 찾은 후 Matlab을 이용하여 중심좌표값을 찾아 해부학적 모양을 반영한 그래프를 얻었고, 구간별 3차원 곡률반경 값을 구하였다. 그 결과 실험군의 대퇴골 평균 곡률반경과 표준편차는 $758.15{\pm}206.3mm$로 측정되었고, 정상군은 $1672.97{\pm}395.6mm$로 측정되었다. 측정된 결과는 통계적 유의성 확보를 위해 f-검정을 실행하여 두 집단간 평균의 차이를 검증하였다. 이 결과로 미루어 실험군의 대퇴체부 휨 정도가 더 심함을 확일할 수 있었으며 이러한 영상 분석방법을 이용하여 해부학적 중심점을 찾는다면 인공슬관절 치환술 같은 정형외과적 수술에 도움이 될 것이라 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.244-253
• /
• 1997

During preparation of narrow curved canals, procedural accidents such as, ledge, zipping, and transportation are frequently encountered and may lead to failure of endodontic therapy. To reduce these procedural errors and efficiently manage curved canals, various modifications in instrumentation technique and the design and flexibility of instruments have been advocated. This study compared the maintenance of the original canal curvature, cross sectional canal shape, and preparation time during instrumentation with stainless steel hand (K-Flexo) file, and nickel-titanium rotary files (Profile and Lightspeed). Thirty resin blocks with simulated curved canals of 20~25 degrees were used and divided into three groups of 10 each. In group 1, canals were instrumented using a quarter turn/pull technique with K-Flexofiles. Group 2 canals were prepared with rotary NiTi Profiles. Group 3 was prepared with rotary NiTi Lightspeed instrument. Before and after instrumentation, all canals were scanned using stereo microcope, FlexCam camera, and Photoshop 3.0 computer program. The results were as follows : 1. All groups showed some loss of canal curvature after instrumentation. Average loss of canal curvature was 8.6 degrees for K-Flexofile, 7.7 degrees for Profile, and 5.8 degrees for Lightspeed. Lightspeed exhibited significantly less curvature loss than K-Flexofile (p<0.05). 2. At the apical 1-mm level, Profile produced significantly rounder canals than Lightspeed (p<0.05). At the 3-mm level, Profile and Lightspeed exhibited significantly rounder canals than K-Flexofile (p<0.05). 3. Preparation with Lightspeed was significantly faster than Profile and K-Flexofile, and Profile was faster than K-Flexofile (p<0.05). 4. There was no significant difference in incidence of zipping between the hand K-Flexofile and rotary NiTi (Profile and Lightspeed) instruments. Most of apical canals were slightly widened near the apical foramen. As a results of this study, rotary NiTi instruments are superior to the K-Flexofile in regard to the maintenance of original canal curvature, cross-sectional shape and preparation time. But more investigations and studies should be needed to evaluate the ideal canal instrumentation.

• 한국측량학회지
• /
• 제8권2호
• /
• pp.45-51
• /
• 1990

수치표고모델은 실제지형모델의 참값과 비교하여 충분하고 높은 정확도를 지녀야 하며, 미리 주어져 있는 지형데이타와 보간법을 사용하여 임의의 평면위치(X, Y)에 대응하는 표고 h를 구하고 경사를 구할 수 있는 모텔을 만들어 놓아야 한다. 보간의 정확도는 지형의 기복 상태와 자료의 밀도에 우선적으로 영향을 받게 되므로, 지형을 객관적인 방법으로 분류할 필요가 있다. 평균경사도와 면적비는 지형이 경사상태에 따라 비슷한 분류 결과를 가져오는 변수이지만, 지형의 국소적인 변화크기를 동시에 표시하는 변수는 면적비이다. 그러므로 본 연구는 지형의 분류를 좀 더 객관화하기 위하여 비고에 의해서가 아니라 경사도에 의해 분류하고, 경사와 곡률경중율의 영향을 분석하여 그 경사도에 합당한 매개변수를 도입하므로써 보다 현실에 가까운 모델을 재현하는데 연구의 목적이 있다. 연구의 결과는 첫째, 경사에 의한 지형의 분류는 평지는 pl6과 p24 준경사지 pl6과 S, 급경사지는 S 와 p24가 적합하고 곡률에 의한 분류는 평지와 준경사지에서 모두 p24와 S가 적합하며, 급경사지에서는 pl6이 적합하였다. 경사와 기복 변화량을 조합한 경우는 평지는 pl6, 준경사지는 p24, 급경사지는 S가 각각 적합하였다. 둘째, 유형화율은 경사 50%, 곡률경중율 0.0015에서 50∼80%로 가장 컸다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.249-254
• /
• 1987

This paper presents a new method for generating smooth free-form surface by local correction. B-spline surface is used for its convenience of local correction, and the direction of surface correction is fixed to the average-surface-normal direction. The surface to be corrected is approximated into a uniform cubic B-spline surface. Then, the smoothness (curvature arrows, iso-parametric lines) of the approximated surface is displayed with B-spline control points. When a control point near the region that needs correction is selected, a new point 1 mm higher than the original control point in the direction of the average surface normal is displayed. And the surface is corrected by giving the amount of control point movement interactively. Since the direction of correction is given by the program and the amount of correction is selected by the user, the method is called semiautomatic. sufficiently smooth surface can be obtained by this method. Examples are given to illustrate the method.

• 대한인간공학회지
• /
• 제33권3호
• /
• pp.191-202
• /
• 2014

Objective: This study is conducted on the differences between flat and curved displays with respect to location of focused points, posture and satisfaction as well as preferred tilt angles. Background: In order to avoid physical and eye fatigue caused by misplayed sitting posture, many studies have asserted that the display requires appropriate location, size and tilt angle as well as curvature. However, most studies have focused on the work environment and the results are varied in the extent. Method: Eye height data in sitting posture were collected from 30 participants. Participants selected the most comfortable viewing angle within the range from $0^{\circ}$ to $12^{\circ}$ while watching videos for both curved and flat display. Then, physical and eye fatigue and overall satisfaction were subjectively evaluated. Lateral diagram describing viewing display condition was set and used to develop linear models for expecting the preferred tilt angle. Results: Due to sitting in the natural viewing posture rather than upright, the eye height is lowered to about 4.6 centimeters, on average, for both displays showing no significant differences. In contrast, preferred angles for the two displays are significantly different and this can be interpreted that curvature vary the points focused. Two linear models as functions of sitting eye height are developed to expect preferred tilt angle for each display. Based on the result of overall satisfaction evaluation, curved display is statistically better than flat display. Conclusion: The results show that flat and curved displays are significantly different expect for the viewing posture. However, reasons for preferring curved display are not accurately factorized and the linear models are limited in the experiment condition such as size of display, distance between display and viewer and other physical environmental factors. Further studies on curved displays under more various conditions are required. Application: This study can contribute to use of the curved display in various way.

• 한국게임학회 논문지
• /
• 제2권2호
• /
• pp.28-36
• /
• 2002

일반적으로 삼각형 메쉬는 가상 게임 캐릭터와 같은 기하학적 객체를 모델링하기 위해 사용되고 있다. 아주 조밀한 메쉬는 복잡한 객체를 세부적으로 표현하는 장점은 있지만 객체를 저장, 전송 및 렌더링하는데 많은 비용을 요구한다. 그러므로 세밀한 객체를 질 좋게 근사시킬 수 있는 기법, 즉 삼각형 메쉬의 단순화가 연구되어왔다. 본 논문에서는 주어진 메쉬를 단순화하기 위해 사용될 수 있는 정점과 에지에 관한 근사 평균 곡률이라는 새로운 측정치를 제시한다. 에지 평균 곡률은 이웃한 에지를 고려하게 계산되고 정점 평균 곡률은 부속된 에지의 평균 곡률의 평균으로 정의된다. 그리고 제안된 측정치를 토끼, 용 및 치아와 같은 모델에 적용한다. 결과로, 제안된 평균 곡률이 주어진 모델에 더 좋은 근사를 제공하기 위한 좋은 기준치로 사용될 수 있음을 알았다.

• 대한치과보철학회지
• /
• 제42권5호
• /
• pp.524-534
• /
• 2004

Statement of problem: The meaning of the beauty has a little different nature according to a time, culture, and nation. Purpose : This study was undertaken to estimate the geometric esthetic criteria for Korean woman by analysis of facial photograph in a smiling. Material and methods: The facial photographs of 678 Korean beautiful woman were collected from Miss Korea candidates(from 1971 to 2003 year). The dento-facial composition was measured and analyzed geometrically on computer monitor using $Adobe^{(R)}$ $Photoshop^{(R)}$ 7.0. The statistical significance of the differences among the 4 decade groups was estimated by a $x^2$ test. Result : The Korean beautiful woman skewed the geometric characteristics such as the 'coincidence' (83.0%) between facial midline and dental midline, the 'normal' (96.9%) alignment and arrangement of upper anterior teeth. the 'average' (79.1%) position and 'upward' (53.4%) curvature of upper lip, the 'parallel' (85.7%) relationship between the lower lip and upper anterior incisal curvature, the 'touching' (49.9%) and 'not-touching' (44.8%) relationship between upper anterior incisor and towel lip, the 'first premolar' (54.1%) and 'second premolar' (38.9%) displayed in a smile, and the 'symmetry' (89.4%) of smile. There was statistical significance among the 4 decades in the respect of the upper lip curvature, the relationship between upper anterior incisor and lower lip, and the most posterior teeth displayed in a smile (p<0.05). Conclusion : The Korean beautiful woman showed similar results to the western esthetic criteria in the some respects and the tendency that the Korean woman had more active smiling recently.

• 대한조선학회논문집
• /
• 제48권3호
• /
• pp.281-287
• /
• 2011

This paper explains the basic theory and a new development of for the residual strength prediction program of the asymmetrically damaged ships, being capable of searching moment-curvature relations considering neutral axis mobility. It is noted that moment plane and neutral axis plane should be separately defined for asymmetric sections. The validity of the new program is verified by comparing moment-curvature curves of 1/3 scaled frigate model where the results from new algorithm well coincide with experimental and nonlinear FEA results for intact condition and with nonlinear FEA results for damaged condition. Applicability of new algorithm is also verified by applying VLCC model to the newly developed program. It is proved that reduction of residual strengths is visually presented using the new algorithm when damage specifications of ABS, DNV and IMO are applied. It is concluded that the new algorithm shows very good performance to produce moment-curvature relations with neutral axis mobility on the asymmetrically damaged ships. It is expected that the new program based on the developed algorithm can largely reduce design period of FE modeling and increase user conveniences.

• Archives of Plastic Surgery
• /
• 제37권3호
• /
• pp.250-255
• /
• 2010

Purpose: Pincer nail is a relatively rare deformity characterized by an increase in transverse curvature along the longitudinal axis of the nail. This curvature commonly increases from proximal to distal end of nail, leading to pinching, curling, and distortion of the underlying soft tissue and resulting frequently in severe pain. Numerous surgical procedures have been reported. Preserving the width of the nail in the correction of the pincer nail is very important for functional and aesthetic reasons. We report the results of the correction of the pincer nail using autogenous dermofat graft with a good result. Methods: From May 2006 to September 2008, dermofat graft was performed in 6 patients with pincer nail. Patients were four women and two men, and the average age was 51. The affected digits were the unilateral great toes in four patients and the unilateral thumbs in two patients. Average follow-up period was 13 months. Surgical procedure was removal of nail using an elevator to avoid damage to the nail bed. An incision was created in distal portion of hyponychium. Paronychium was dissected from distal phalanx by periosteal elevator through incision of hyponychium and tunnel was made. Then dermofat grafts harvested from inguinal area were inserted into the tunnel. Finally, a silicone sheet was inserted eponychial fold for prevention of synechia. Objective assessment was evaluated by use of the width index and height index. Results: All patients reported resolution of the pain and soft tissue pinching sensation that they had before the operation. There was good adherence between the nail plate and the underlying nail bed. The nails have regrown and were corrected in a normal and flattened appearance. The width index and height index were improved. Conclusion: The autogenous dermofat graft seems to provide an effective treatment of the pincer nail with preservation of the nail matrix.