• 한국터널지하공간학회 논문집
• /
• 제14권2호
• /
• pp.141-157
• /
• 2012

TBM 공법 적용을 위한 도로터널 단면의 국내 외 설계사례와 시공사례 및 터널단면 설계기준을 조사 분석하였다. 교통량에 따라 차로수의 규모 및 내부형상(단층 혹은 복층)이 상이하였고, 상 하부의 여유공간은 환기, 방재시설 및 유지관리 공간 등으로 다양하게 활용하고 있음을 확인하였다. TBM도로터널의 구성요소별 면적비를 확인하기 위하여 2차로 규모의 표준단면을 가정하고, 길어깨 폭원변화에 따른 내공단면 구성요소(시설한계 수용공간, 상부여유공간, 하부여유공간)의 단면적비를 분석하였다. 아울러 도로터널에 필수적으로 설치되는 차도 슬래브의 지지형식별 소요두께를 구조해석을 통하여 산정하였고, 산정된 벽체 및 슬래브 두께와 하부 여유공간의 상관관계를 분석하여 유효단면적 범위를 제시하였다.

• 대한건축학회논문집:구조계
• /
• 제34권10호
• /
• pp.11-18
• /
• 2018

In this study, the cross-sectional image has been acquired to evaluate the aggregate distribution affecting quality of lightweight aggregate concrete, and through the binarization method, the study is to calculate the aggregate area of upper and lower sections to develop the method to assess the aggregate distribution of concrete. The acquisition of cross-section image of concrete for the above was available from the cross-sectional photography of cleavage tension of a normal test specimen, and an easily accessible and convenient image analysis software was used for image analysis. As a result, through such image analyses, the proportion of aggregate distribution of upper and lower sections of the test specien could be calculated, and the proportion of aggregate area U/L value of the upper and lower regions of concrete cross-section was calculated, revealing that it could be used as the comprehensive index of aggregate distribution. Moreover, through such method, relatively easy image acquisition methods and analytic methods have been proposed, and this indicated that the development of modeling to assess aggregate distribution quantitatively is available. Based on these methods, it is expected that the extraction of fundamental data to reconsider the connectivity with processes in concrete will be available through quality assessment of quantitative concrete.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.39-52
• /
• 2003

A computer program has been developed for the optimum design of prestressed concrete beams under flexure. Optimum values of prestressing force, tendon configuration, and cross-sectional dimensions are determined subject to constraints on the design variables and stresses. 28 constraints have been used including flexural stresses, cover requirement, the aspect ratios for top and bottom flanges and web part of a beam and ultimate moment. The objective function contains cost of concrete, prestressing force and formwork. Using this function, it is possible to obtain minimum cost design, minimum weight or cross-sectional area of concrete design and minimum prestressing force design. Besides the idealized I-shaped cross-section, which is widely used in literature, a general I-shaped cross-section with eight geometrical design variables are used here. Four examples, one of which is available in the literature and the others are modified form of it, have been solved for minimum cost and minimum cross-sectional area designs and the results are compared. The computer program, which employs modified grid search optimization method, can assist a designer in producing efficient designs rapidly and easily. Considerable savings in computational work are thus made possible.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.54-59
• /
• 2000

The next generation fibre size analyser has been developed in Kajaani based on over 15 years experience in fibre measurement. This new FiberLab-analyser can measure fibre length both along the fibre centre line and as projected. The cross-sectional measurements of fibre are in principle similar to the earlier version FiberLab. Measured data are generally displayed in distributions. Some new calculations have been added, for example the fibres cross sectional area and fibre volume index both available as distributions as well. The performance of the FiberLab measurement is verified against the manual microscopic testing. These tests show that the new image analysis-based measurement well matches with the manual methods.

• 한국임상수의학회지
• /
• 제40권3호
• /
• pp.182-188
• /
• 2023

Sarcopenia and myosteatosis can increase the risk of adverse effects in dogs and humans. However, such imaging study results for evaluating sarcopenia and myosteatosis in small dogs have not yet been available. The objective of this study was to assess age-related changes according to the breed in epaxial muscle cross-sectional area (CSA) and fat infiltration using CT to evaluate sarcopenia and age-related myosteatosis in small breed dogs. In 144 dogs (92 Maltese dogs, 27 Poodle dogs, and 25 Shih Tzu dogs), Hounsfield Unit (HU) values and CSA of left epaxial muscle were measured at the thirteenth thoracic vertebral level on non-contrast transverse CT images. Differences in HU values and CSA according to age and breed were analyzed. The geriatric group (≥12 years) had significantly lower HU values of epaxial muscle than mature adult group (2 to 6 years) of all breeds. The geriatric group had significantly lower CSA of epaxial muscle than mature adult and senior groups (7 to 11 years) of Maltese dogs. HU values of epaxial muscle were not significantly different among all age groups of all breeds. Maltese dogs had significantly lower CSA of epaxial muscle than Poodle and Shih Tzu dogs in all age groups. Results of this study showed that as age increased in small breed dogs, muscle mass and density decreased.

• Computers and Concrete
• /
• 제31권3호
• /
• pp.253-265
• /
• 2023

In this research, the gene expression programming (GEP) technique was employed to provide a new model for predicting the maximum loading capacity of concrete-encased steel (CES) columns. This model was developed based on 96 CES column specimens available in the literature. The six main parameters used in the model were the compressive strength of concrete (f_c), yield stress of structural steel (f_ys), yield stress of steel rebar (f_yr), and cross-sectional areas of concrete, structural steel, and steel rebar (A_c, A_s and A_r respectively). The performance of the prediction model for the ultimate load-carrying capacity was investigated using different statistical indicators such as root mean square error (RMSE), correlation coefficient (R), mean absolute error (MAE), and relative square error (RSE), the corresponding values of which for the proposed model were 620.28, 0.99, 411.8, and 0.01, respectively. Here, the predictions of the model and those of available codes including ACI ITG, AS 3600, CSA-A23, EN 1994, JGJ 138, and NZS 3101 were compared for further model assessment. The obtained results showed that the proposed model had the highest correlation with the experimental data and the lowest error. In addition, to see if the developed model matched engineering realities and corresponded to the previously developed models, a parametric study and sensitivity analysis were carried out. The sensitivity analysis results indicated that the concrete cross-sectional area (A_c) has the greatest effect on the model, while parameter (f_yr) has a negligible effect.

• Advances in Computational Design
• /
• 제3권1호
• /
• pp.71-86
• /
• 2018

Thin-walled cross-sections can be optimized to enhance their resistance and progress their behaviour, leading to more competent and inexpensive structural system. The aim of this study is to afford a methodology that would facilitate progress of optimized cold formed steel (CFS) column section with maximum ultimate strength for practical applications. The proposed sections are designed to comply with the geometrical standards of pre-qualified column standards for CFS structures as well as with the number of industrialized and practical constraints. The stiffening evaluation process of CFS lipped channel columns, a five different cross section are considered. The experimental strength and behaviour of the proposed sections are verified by using the finite element analysis (FEA). A series comprehensive parametric study is carried out covering a wide range of section slenderness and overall slenderness ratio of the CFS column with and without intermediate web stiffeners. The ultimate strength of the sections is determined based on the Direct Strength Specification and other design equation available from the literature for CFS structures. A modified design method is proposed for the DSM specification. The results indicate that the CFS column with complex edge and intermediate web stiffeners provides an ultimate strength which is up to 78% higher than standard optimized shapes with the same amount of cross sectional area.

• Journal of Forest and Environmental Science
• /
• 제34권2호
• /
• pp.119-125
• /
• 2018

The tropical forests in developing countries are faced with the problem of illegal exploitation of trees. However, dearth of empirical means of expressing the dimensions, structure, quality and quantity of a removed tree has imped conviction of offenders. This study aimed at developing a model that can effectively estimate individual tree basal area (BA) from stump diameter (Ds) for Tectona grandis stands in Omo Forest Reserve, Nigeria, for timber valuation in case of illegal felling. Thirty-six $25m{\times}25m$ temporary sample plots (TSPs) were laid randomly in six age strata; 26, 23, 22, 16, 14, and 12 years specifically. BA, Ds and diameter at breast height were measured in all living T. grandis trees within the 36 TSPs. Least square method was used to convert the counted stumps into harvested stem cross-sectional areas. Six basal area models were fitted and evaluated. The BA-Ds relationship was best described by power model which gave least values of Root mean square error (0.0048), prediction error sum of squares (0.0325) and Akaike information criterion (-15391) with a high adjusted coefficient of determination (0.921). This study revealed that basal area estimation was realistic even when the only information available was stump diameter. The power model was validated using independent data obtained from additional plots and was found to be appropriate for estimating the basal area of Tectona grandis stands in Omo Forest Reserve, Nigeria.

• 한국추진공학회지
• /
• 제1권1호
• /
• pp.55-63
• /
• 1997

본 연구에서는 기본적인 배관요소 중의 하나인 급축소/확대관을 지나는 압축성 유동을 해석하기 위하여 압축성 유체에 대한 이론계산을 수행하였다. 관 입구에서 유동의 마하수, 단면적 축소 및 확대비 등을 변화시켜, 압축성 효과 및 유동의 초우킹 조건 등을 구하였다. 본 연구의 결과들은 배관계를 설계하는데 기초자료가 될 뿐만 아니라 배관계를 지나는 압축성 유동에 대한 실용적인 계산법으로 활용될 수 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1997년도 제8회 학술강연회논문집
• /
• pp.235-244
• /
• 1997

The empirical factor and reaction force based on published data were involved to investigate compressible flows through sudden enlargement and sudden contraction passages. Analytical solutions of engineering interest were obtained from one-dimensional steady compressible gas dynamic equations. The effects of compressibility, cross-sectional area ratio, and inlet Mach number on the air flows were discussed with regards to the total pressure loss and flow choking. The present results provide available information necessary ta design the compressible pipe flow systems.