• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.131-133
• /
• 2001

The basic function of a Power-System Stabilizer(PSS) is to add damping to the generator rotor oscillations by controlling its excitation using auxiliary stabilizing signals. To provide damping. the stabilizer must produce a component of electrical torque in phase with the rotor speed deviations. This paper introduces the hardware specifications and various functions of microprocessor (TMS320C32)-based digital PSS to provide the damping torque.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.106-111
• /
• 2020

In this paper, we propose the non-contact gesture recognition system and algorithm using proximity-based sensors. The system uses four IR receiving photodiode embedded on a single chip and an IR LED for small area. The goal of this paper is to use the proposed algorithm to solve the problem associated with bringing the four IR receivers close to each other and to implement a gesture sensor capable of recognizing eight directional gestures from a distance of 10cm and above. The proposed system was implemented on a FPGA board using Verilog HDL with Android host board. As a result of the implementation, a 2-D swipe gesture of fingers and palms of 3cm and 15cm width was recognized, and a recognition rate of more than 97% was achieved under various conditions. The proposed system is a low-power and non-contact HMI system that recognizes a simple but accurate motion. It can be used as an auxiliary interface to use simple functions such as calls, music, and games for portable devices using batteries.

• Structural Engineering and Mechanics
• /
• 제29권4호
• /
• pp.381-390
• /
• 2008

This paper proposed a conceptual design of bascule bridge, which is a new kind of movable bridge with an aim of reducing the weight of superstructure. Compared with the traditional bascule bridge, the light bascule bridge chooses cable-stayed bridge with inclined pylon as its superstructure; therefore, the functions of balance-weight and structure will fuse into one. Otherwise, it adopts moving counterweight to adjust its center of gravity (CG) to open or close the bridge. In order to lighten the superstructure, it uses contact springs to auxiliary retract, and intelligent prestressing system (IPS) to control the main girder's deformation. Simultaneously the vibration control scheme of structure is discussed. Starting from establishing the mechanical model of bridge, this article tries to analyze the conditions that the design parameters of structure and attachments should satisfy to. After the design procedure was presented, an example was also adopted to explain the primary design process of this kind bridge.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.146-151
• /
• 2001

The Grand-Touring is a game motion simulator that simulates the race-car driving motion with three hydraulic cylinders which connect the platform and base in parallel. Its motion control system consists of the PC-based main controller and micro-controller based sub-controller. The former one process the dynamic image of race-car in response to the driver's action and computes the reference command for each cylinder and the latter one is designed for the tracking control of hydraulic cylinder and interfacing the auxiliary signals between various sensors/actuator and main controller. In this research, we developed the sub-controller that implements the required functions of Grand-Touring and prove the overall performance with experiments.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.634-639
• /
• 2003

The static inverter is mainly used to provide with the electric power of various loads in the train. In the recent european projects, the specification of static inverter become harder, and many additional service function is expected. It takes long time and high cost to develope a static inverter with these high performances and additional function. But, these are became general demands for static inverter in the many projects from now on. The APSE(Auxiliary Power Supply Equipment) is a static inverter of high performance to satisfy the severe specification and various service function following these tendency for Athens project In this paper, the specification of APSE and various service functions are introduced to look about current tendencies of static inverter.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.69-76
• /
• 2002

In this paper, several improved Element-Free Galerkin (EFG) methods containing singular expression in their approximation functions are compared one another through a patch test with near-tip field. Intrinsic enrichments that expand the basis function partially and fully with known near-tip displacement field and a local enrichment using auxiliary supports based on the partition of unity concept are examined by evaluating a relative stress norm error and the stress intensity factor. Some numerical examinations graphically show that how the size of compact support, dilation parameter and the diffraction parameter can affect the accuracy of the improved EFG methods in the error and the stress intensity factor.

• 한국통신학회논문지
• /
• 제37권5A호
• /
• pp.367-374
• /
• 2012

본 논문에서는 binary offset carrier (BOC) 신호를 위한 새로운 상관함수 주변첨두 제거 기법을 제안한다. 제안한 기법은 BOC 자기상관함수를 구성하는 부상관함수의 결합에 기반을 두고 있으며, 수신기에서 보조 신호를 필요로 하지 않고, sine 위상 및 cosine 위상 BOC 신호에 모두 적용이 가능하다. 또한 모의실험 결과를 통해 제안한 기법이 기존의 기법들에 비해 더 좋은 신호 추적 성능을 가짐을 보인다.

• Kyungpook Mathematical Journal
• /
• 제64권1호
• /
• pp.95-111
• /
• 2024

The filled function method is useful in solving unconstrained global optimization problems. However, depending on the type of function, and parameters used, there are limitations that cause difficultiies in implemenations. Exponential and logarithmic functions lead to the overflow effect, requiring iterative adjustment of the parameters. This paper proposes a polynomial-filled function that has a general form, is non-exponential, nonlogarithmic, non-parameteric, and continuously differentiable. With this newly proposed filled function, the aforementioned shortcomings of the filled function method can be overcome. To confirm the superiority of the proposed filled function algorithm, we apply it to a set of unconstrained global optimization problems. The data derived by numerical implementation shows that the proposed filled function can be used as an alternative algorithm when solving unconstrained global optimization problems.

• Journal of Microbiology and Biotechnology
• /
• 제28권4호
• /
• pp.622-629
• /
• 2018

Expansins are cell wall proteins that mediate cell wall loosening and promote specific tissue and organ morphogenesis in plants and in some microorganisms. Unlike plant expansins, the biological functions of fungal expansin-like proteins have rarely been discussed. In the present study, an expansin-like protein-encoding fvexpl1 gene, was identified from Flammulina velutipes by using local BLAST. It consisted of five exons with a total length of 822 bp. The deduced protein FVEXPL1 contained 274 amino acids with a predicted molecular mass and isoelectric point of 28,589 Da and pH 4.93, respectively. The first 19 amino acids from the N terminal are the signal peptide. Phylogenetic analysis and multiple protein alignment indicated FVEXPL1 was an expansin-like protein. The expression level of fvexpl1 gene in the stipe was significantly higher than that in the mycelia, primordia, and cap. However, the expression level of fvexpl1 gene was significantly higher in the fast elongation region of the stipe as compared with the slow elongation region. Expression analysis indicated that fvexpl1 gene might have an auxiliary role in the stipe morphogenesis of F. velutipes.

• 정보보호학회논문지
• /
• 제29권1호
• /
• pp.29-43
• /
• 2019

최근, IoT 무선 디바이스 등의 증가로 WSN(Wireless Sensor Network) 환경에서 네트워크 트래픽이 증가하면서 네트워크 자원을 안전하고 효율적으로 관리하는 SDN(Software-Defined Networking)을 WSN에 적용한 SDWSN(Software-Defined Wireless Sensor Networking)과 그에 대한 보안 기술에 대한 관심도가 증가하고 있다. 본 논문에서는 SDWSN 환경에서 PUF(Physical Unclonable Function) 기반 그룹 키 분배 방법을 안전하고 효율적으로 설계하는 방법을 서술한다. 최근에 Huang 등은 그룹 키 분배에 SDN의 장점과 PUF의 물리적 보안 기능을 이용하여 그룹 키 분배 방법을 설계하였다. 하지만, 본 논문에서는 Huang 등의 프로토콜이 보조 제어부 미인증과 불필요한 동기화 정보를 유지하는 취약점이 존재함을 발견하였다. 본 논문에서는 보조 제어부에 인증과정을 안전하게 설계하고, 불필요한 동기화 정보는 삭제하되 카운터 스트링과 랜덤 정보를 추가하여 Huang의 취약점을 개선하였다.