• 농업과학연구
• /
• 제50권4호
• /
• pp.773-784
• /
• 2023

In this study, we developed a dynamic model and steering controller model for an autonomous tractor and evaluated their performance. The traction force was measured using a 6-component load cell, and the rotational speed of the wheels was monitored using proximity sensors installed on the axles. Torque sensors were employed to measure the axle torque. The PI (proportional integral) controller's coefficients were determined using the trial-error method. The coefficient of the P varied in the range of 0.1 - 0.5 and the I coefficient was determined in 3 increments of 0.01, 0.05, and 0.1. To validate the simulation model, we conducted RMS (root mean square) comparisons between the measured data of axle torque and the simulation results. The performance of the steering controller model was evaluated by analyzing the damping ratio calculated with the first and second overshoots. The average front and rear axle torque ranged from 3.29 - 3.44 and 6.98 - 7.41 kNm, respectively. The average rotational speed of the wheel ranged from 29.21 - 30.55 rpm at the front, and from 21.46 - 21.63 rpm at the rear. The steering controller model exhibited the most stable control performance when the coefficients of P and I were set at 0.5 and 0.01, respectively. The RMS analysis of the axle torque results indicated that the left and right wheel errors were approximately 1.52% and 2.61% (at front) and 7.45% and 7.28% (at rear), respectively.

• 제어로봇시스템학회논문지
• /
• 제21권3호
• /
• pp.199-209
• /
• 2015

This paper presents a model predictive control (MPC) approach to control the steering angle in an autonomous vehicle. In designing a highly automated driving control algorithm, one of the research issues is to cope with probable risky situations for enhancement of safety. While human drivers maneuver the vehicle, they determine the appropriate steering angle and acceleration based on the predictable trajectories of surrounding vehicles. Likewise, it is required that the automated driving control algorithm should determine the desired steering angle and acceleration with the consideration of not only the current states of surrounding vehicles but also their predictable behaviors. Then, in order to guarantee safety to the possible change of traffic situation surrounding the subject vehicle during a finite time-horizon, we define a safe driving envelope with the consideration of probable risky behaviors among the predicted probable behaviors of surrounding vehicles over a finite prediction horizon. For the control of the vehicle while satisfying the safe driving envelope and system constraints over a finite prediction horizon, a MPC approach is used in this research. At each time step, MPC based controller computes the desired steering angle to keep the subject vehicle in the safe driving envelope over a finite prediction horizon. Simulation and experimental tests show the effectiveness of the proposed algorithm.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.80-86
• /
• 2020

Autonomous driving is one of the most important new technologies of our time; it has benefits in terms of safety, the environment, and economic issues. Path following algorithms, such as automated lane keeping systems (ALKSs), are key level 3 or higher functions of autonomous driving. Pure-Pursuit and Stanley controllers are widely used because of their good path tracking performance and simplicity. However, with the Pure-Pursuit controller, corner cutting behavior occurs on curved roads, and the Stanley controller has a risk of divergence depending on the response of the steering system. In this study, we use the advantages of each controller to propose a hybrid control strategy that can be stably applied to complex driving environments. The weight of each controller is determined from the global and local curvature indexes calculated from HD map information and the current driving speed. Our experimental results demonstrate the ability of the hybrid controller, which had a cross-track error of under 0.1 m in a virtual environment that simulates K-City, with complex driving environments such as urban areas, community roads, and high-speed driving roads.

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.696-703
• /
• 2005

Since most autonomous mobile robots are powered by a battery, it is important to increase the continuous operating time without recharging. This can be achieved by improving the energy efficiency of a mobile robot, but little research on energy efficiency has been performed. This paper proposes two methods for improving the energy efficiency of an omnidirectional mobile robot.. One method is to realize a continuously variable transmission (CVT) by adopting the mechanism of steerable omnidirectional wheels. The other is the proposed steering algorithm in which wheel arrangement of the mobile robot is continuously adjusted so as to obtain the maximum energy efficiency of the motors during navigation. In addition, new omnidirectional wheels which can be transformed to the conventional wheels depending on the driving conditions are proposed to compensate for less efficient omnidirectional drive mode. Various tests show that motion control of the OMR-SOW works satisfactorily and the proposed steering algorithm for CVT can provide higher energy efficiency than the algorithm using a fixed steering angle. In addition, it is shown that the differential drive mode can give better energy efficiency than the omnidirectional drive mode.

• 융합신호처리학회논문지
• /
• 제4권1호
• /
• pp.56-63
• /
• 2003

본 논문은 실제 무인주행자동차에 적용할 수 있는 비전 기반의 소형 자율이동로봇 개발에 관한 연구를 제시한다. 이전의 자율주행차량은 하드웨어 설계의 복잡성, 실장의 어려움과 많은 계산량으로 인해 PC에 대한 의존도가 높았다. 본 논문에서는 고속에서 정확한 조향 및 빠른 이동을 할 수 있고, 단일 카메라를 사용한 독립형 시스템으로 지능적 인식을 할 수 있는 소형 자율이동로봇을 제안한다. 제안된 시스템은 폭 25~30cm, 총길이 200cm로 만들어진 트랙에서 실험하였다. 실험 로봇은 직선 트랙에서 평균 32.9km/h, 곡률반경 30~40m인 곡선트랙에서 평균 22.3km/h의 속도로 주행할 수 있었다 이 시스템은 실제 무인 자동차를 쉽게 만들기 위해 사용할 수 있는 차선 인식 알고리즘을 적용한 소형 자율이동로봇 시스템에 대한 하나의 모델을 제시할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1014-1019
• /
• 2005

In this paper, a neural network technique for automatic steering control of a four wheel drive autonomous highway snowplow vehicle is presented. Controllers are designed by the LQR method based on the vehicle model. Then, neural network is used as an auxiliary controller to minimize lateral tracking error under the presence of load. Simulation studies of LQR control and neural network control are conducted for the vehicle model under a virtual snowplowing situation. Tracking performances are also compared for two and four wheeled steering vehicles.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.954-959
• /
• 2003

Colonoscopy is an important medical procedure for the diagnosis of various diseases like cancers in the colon and rectum. But it requires a lot of time for a doctor to acquire dexterous skills necessary to perform successful colonoscopy. Moreover, to many patients, conventional colonoscopy simply takes too long time. Therefore, some studies on the development of autonomous and more convenient colonoscope are carried out. In this Paper, we Propose a functional colonoscope robot system that has a locomotive function with a hollow body, a steering system, and other basic functions of typical conventional colonoscope systems. The concept and each component of the functional colonoscope system are described in this paper. In order to evaluate the functional performance of the colonoscope robot, we carried out in -vitro and in-vivo tests.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.151-151
• /
• 2000

The objective of this paper is to develop the new robust and adaptive control system against external environments as applying the probabilistic recognition which is one of the inherent properties of immune system, ability of learning and memorization, and regulation theory of immune network to the system under engineering point of view. In this paper, HIA(Humoral Immune Algorithm) PID controller using Neural Network Identifier was proposed to drive the autonomous guided vehicle(AGV) more effectively. To verify the performance of the proposed HIA PID controller, some experiments for the control of steering and speed of that AGV are performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2572-2574
• /
• 2000

In this paper, cell-mediated immune algorithm(CMIA) controller was proposed and applied for the autonomous guided vehicle(AGV) driving. It was based on specific immune response of the biological immune system which is the cell-mediated immunity. To verify the performance of the designed CMIA controller, some experiments were performed for the control of steering and speed of AGV. And then the displacement and speed tracking error of the AGV was mainly investigated. As results, the capability of realization and reliableness were proved by comparing the response characteristics of the classical controller with the proposed CMIA controller.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.141-148
• /
• 2008

In this paper, we develop a detailed full dynamic model which includes various rough terrains for 6-wheel skid-steering mobile robot based on the real experimental autonomous vehicle called Dog-Horse Robot. We also design a co-simulation for performance comparison of path tracking algorithms. The control architecture in the co-simulation can be divided into two levels. The high level control is the closed-loop control of path tracking to follow a given path, and the low level is concerned about torque control of wheel motion. The simulation using the mechanical data of the Dog-Horse Robot is performed under the Matlab/Simulink environment. We also simulate and evaluate the performance of the model based adaptive controller.