• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1017-1021
• /
• 2000

This paper addresses experimental results carried out to investigate the characteristics of dynamic mass for Korean. Vertical seat vibration in the frequency range of 0.5-30 Hz was applied to a seated Korean male subject. To examine the intra-variable effects on dynamic mass, five different postures and three different vibration excitation levels were considered. The applied acceleration and transmitted force to the hip of the seated subject were measured simultaneously. Detailed experimental results of measured dynamic mass are illustrated for each posture and/or vibration excitation level. Maximum peaks of around 5 Hz were observed for most experimental cases. They are found to allow the identification of dynamic characteristics of Korean seated body for various real vibration environments. Furthermore, they are expected to be very useful in designing new seats for automotive and railway vehicles and in improving their vibration ride duality.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.9-14
• /
• 2020

This paper is a purpose to study the failure examples for a large bus vehicle fire. The first example, the researcher certified the fact that the absorbing material break away from the upper side of engine room because of weaken durability and the fire was produced in engine. The second example, it sought the fact that the fire breaks out by electric short because of over-load of compressor. The third example, it found the fact that the fire took place by heating of bellows upper part that was connected with muffler and exhaust manifold. The fourth example, it knew the fact that the fire occurred because of the electric short inside junction box of crash body part that was located to driver seat rightside. Therefore, the fire of a large bus occurring by decrepit of absorbing material and electric short have to thoroughgoingly manage the damage and dangerousness if it happens.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.108-114
• /
• 2010

The injection nozzle of an electro-hydraulic injector is being opened and closed by movement of a injector's needle which is balanced by pressure at the nozzle seat and at the needle control chamber, at the opposite end of the needle. In this study, the effects of needle movement in a piezo-driven injector on unsteady cavitating flows behavior inside nozzle were investigated by cavitation numerical model based on the Eulerian-Lagrangian approach. Aimed at simulating the 3-D two-phase flow behavior, the three dimensional geometry model along the central cross-section regarding of one injection hole with real design data of a piezo-driven diesel injector has been used to simulate the cavitating flows for injection time by at fully transient simulation with cavitation model. The cavitation model incorporates many of the fundamental physical processes assumed to take place in cavitating flows. The simulations performed were both fully transient and 'pseudo' steady state, even if under steady state boundary conditions. As this research results, we found that it could analyze the effect the pressure drop to the sudden acceleration of fuel, which is due to the fastest response of needle, on the degree of cavitation existed in piezo-driven injector nozzle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.140-147
• /
• 2011

The injection nozzle of an electro-hydraulic injector for the common rail Diesel fuel injection system is being opened and closed by movement of a injector's needle which is balanced by pressure at the nozzle seat and at the needle control chamber, at the opposite end of the needle. In this study, the slenoid actuator was considered as a prime movers in high pressure Diesel injector. Namely a solenoid-driven Diesel injector with different driving current types, as a general method driven by solenoid coil energy, has been applied with a purpose to develop the analysis model of the solenoid actuator to predict the dynamics characteristics of the hydraulic component (injector) by using the AMESim code. Aimed at simulating the hydraulic behavior of the solenoid-driven injector, the circuit model has been developed as a unified approach to mechanical modeling in this study. As this analytic results, we know the suction force and first order time lag for driving force can be endowed in solenoid-driven injector in controlling the injection rate. Also it can predict that the input current wave exerted on solenoid coil is the dominant factor which affects on the initial needle behavior of solenoid-driven injector than the hydraulic force generated by the constant injection pressure.

• Journal of Energy Engineering
• /
• v.21 no.1
• /
• pp.86-108
• /
• 2012

$CO_2$ reduction, energy security, and emission reduction are the critical issues in the current automotive industry. As one of the solutions to these issues, Battery Electric Vehicle is attracting attention recently. Advanced battery electric drive vehicle require batteries, power electronics and electrical machines to function. These devices allow the vehicle to use energy from the battery to assist in the propulsion of the vehicle. In this paper, the main feature of these technologies are briefly introduced and recent trends of patent applications are described.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.969-975
• /
• 2013

While accelerating, bicycle frames are subject to torsion forces and deformation. In this study, bicycle frame durability was evaluated by using structural, fatigue, and vibration experiments. Three types of models were designed by changing the frame configurations according to the shape and direction of a bicycle frame design. Because maximum equivalent stress was greatest at the saddle and at connected parts in Models 1, 2, and 3, these frame sections were most vulnerable to failure. Model 2 was the least safe, due to the increased total deformation and equivalent stresses in the top tube horizontal to the ground. Based on vibration and fatigue analysis results, Model 2 was also determined to be the least safe frame, because the head tube was placed slightly higher above the seat tube and inclined to $10^{\circ}$. These study results can be utilized in the design of bicycle frames by investigating prevention and durability against damage.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.5
• /
• pp.390-396
• /
• 2014

A study on smart seats for railroad vehicles was conducted using piezoelectric (PZT) sensors. For this purpose, the concept of passenger friendly smart seats was defined, and a PZT sensor was selected as the optimum sensor based on this concept. Using PZT sensors, simulation tests were performed using a sub-scale model railroad vehicle. In these tests, the main functions of the smart seats were extracted and simplified to improve the effectiveness of the simulation tests. Based on the test results, the system for smart seats proposed in this paper was successfully verified using PZT sensors and the dedicated operation software for the system. This paper will contribute to the improvement of services in high-speed rail systems through advances in ticket checking tasks.

• Advances in Automotive Engineering
• /
• v.1 no.1
• /
• pp.61-77
• /
• 2018

In this study, the effects of sitting position of the driver on the whiplash neck injury have been analyzed experimentally by using hybrid III series 50 percentile male crash test dummy. A testing platform consisting of vehicle ground, driver foot rest, driver seat and a 3-point seatbelt has been prepared. This testing platform and the instrumented crash test dummy are prepared for tests according to the Euro NCAP whiplash testing protocol. The prepared test set-up has been exposed to 3 different acceleration-time loading curves defined in the Euro NCAP whiplash testing protocol by performing sled tests. 9 different sled tests have been performed with the combinations of 3 different seating positions of the crash test dummy and 3 different acceleration-time loading curves. The sensor data obtained from the crash test dummy and high-speed videos taken are analyzed according to the injury assessments criteria defined in the Euro NCAP whiplash testing protocol and the criticality of the whiplash injury is defined. It is seen that the backset distance of the driver head with the headrest and the height difference of the top of the head of the driver with the headrest have a great importance on whiplash injuries.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.3
• /
• pp.192-197
• /
• 2013

In this study, it is investigated the relationship between sitting discomfort and major design variables of lumber support, such as prominence, height and width through volunteer tests. Korean $50^{th}$ percentile males and American $50^{th}$ percentile males are recruited among 36 to 45 years old peoples who have driving experiences and have no back pain during the past 12 months. Subject ratings are asked by changing design variables randomly. Body pressure and lumber position changes are also measured as object measures. And correlation among subject ratings, object measures and three design variables are analyzed using statistical analysis. As a result, it is revealed that prominence is the most dominant factor that correlates to the discomfort strongly for both-Koreans and Americans and contribution of other two variables are very low.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.12
• /
• pp.14-20
• /
• 2020

Currently, the automotive market is intensively researching eco-friendly vehicles such as EV vehicles and hydrogen vehicles. Further, research and developments for the future markets such as autonomous vehicles and the connective cars are coped up continuously along with the rising fuel economy regulations and the emission regulations. In this development, various sensors, batteries, and control devices are fused in order to decrease the weight of the vehicle. Moreover, since the fuel economy regulation is an issue, research on the weight reduction of body parts is underway. Therefore, in this work, a study is conducted to obtain the optimal design of the Dash part that separates the engine room and the passenger seat of the vehicle body by combining lightweight materials with high rigidity materials. The optimal design was obtained using the Finite Element Analysis. Further, AL5083 was used as the lightweight material and ASBC1470 was used for high strength materials. The parts made with this combination of materials had strength equivalent to that of the existing steel and the weight was reduced by 10%.