• Magazine of the Korea Concrete Institute
• /
• v.8 no.6
• /
• pp.163-172
• /
• 1996

Recently, the disposal of used vehicle tires is a big social problem because the amount of used vehicle tires has been increased with development of' automobile industry. Many researches have been made on the recycling of used vehicle tires in the various fields of industry as well as construction industry. When the crumb rubber made of vehicle tires is mixed in cement concrete and mortar, it is indicated that the adhesive strength of interface between the crumb rubber and cement hydrates is very low. The purpose of this study is to improve the fundamental properties by increasing of the adhesion strength of styrene-butadiene rubber(SF3R) latex coated crumb rubber in ; cement mortar. SBR-modified mortar using crumb rubber is also tested as the same method. From the test results, the cement mortar using SBR latex coated crumb rubber have a good fundamental properties compared with that using uncoated crumb rubber. The mechanical properties of SBR-modified mortar using crumb rubber with polymer-cement ratios of 10% are also improved.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.2
• /
• pp.203-218
• /
• 2022

The global value chain, as a major feature of the contemporary global economic system, has been mainly led by developed countries. Whereas developing countries have taken the relatively low value-added activities and this made geographical imbalances in value distribution. This imbalance in value distribution, however, began to gradually alleviated. Related to this phenomenon, the purpose of this research is to analyze the factors affecting factors. Focused on the method of upgrading the industry in the global value chain, the impact on the acquisition of value-added in developing countries was analyzed among the various factors to achieve the research purpose. Panel analysis was conducted on all industries, food and tobacco industries, textile and clothing industries, computer and electornics industries, and automobile industries of the OECD Value-Added Trade Data (TiVA). As a result of the analysis, it was confirmed that in all industries, value-added acquisition in developing countries was improved by increased total production, high value-added product production and participation in early stage. The analysis results by detailed industry showed slightly different patterns depending on the characteristics of each industry.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.33-41
• /
• 2022

As the number of automobile registrations increases yearly, parking spaces that are located in downtown areas are increasing, and mechanical parking facilities are also increasing. Therefore, there is a high risk of accidents when installing and repairing a mechanical parking facility. In the preceding six years (from 2012 to 2018), the statistics that pertain to accidental disasters indicated that a total of 137 disaster victims were generated by the construction sector, 33 accidents occurred, and 10 people died. However, only the safety management items pertaining to accidents that occur during maintenance work and the use of the installed mechanical parking facilities are being studied; furthermore, there is no ongoing research with respect to the risk management that is conducted at the construction site. In 2017, the Korea Occupational Safety and Health Agency (KOSHA) announced the "Guidelines for Safe Installation and Maintenance of Mechanical Parking Equipment"; however, it is a safety guideline that is limited to the installation of basic protective equipment and to facility installation. There is no model for mechanical parking facilities that is indicated in the "Risk Assessment Model by Construction Industry Type", which is issued by the Safety and Health Corporation and is widely utilized for risk assessment in the construction industry; moreover, elevator installation work CODE N0: 22 is the only major example of a disaster. In this study, "risk assessment through a focus group interview" was performed, and data was derived from the "risk assessment of Article 41 (2) of the Industrial Safety and Health Act", which reflects the characteristics of the construction industry based on AHP analysis. The results of this study can be utilized for the risk assessment that is conducted during the construction stage of mechanical parking facilities.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.915-923
• /
• 2023

As environmental regulations on carbon emissions are strengthened worldwide, the existing internal combustion engine-centered automobile industry is being reformed. In particular, large buses and large cargo trucks are pointed out as one of the main causes of environmental destruction due to excessive carbon emissions. The E-Highway power collection system, which has recently been proposed as a solution, uses the vehicle's battery as a backup power source or regenerative braking, depending on whether the pan head of the pentograph installed in the vehicle is in contact with the overhead line. It is used to store the excess energy generated. However, wear through contact due to continuous contact reduces the current collection effect and causes failure. In this paper, by using the current difference, the horizontal position information of the panhead in contact with the overhead line is acquired, thereby reducing the abrasion of the conductor and the panhead Make it possible to follow the overhead line. The position estimation method proposed in this paper simply configures a device that can detect the position of the overhead line of the pantograph by the difference in resistance. It is economical and has the advantage of reducing the volume. The characteristics of the pantograph estimating the location of overhead lines were analyzed using the difference between the two currents of the current collector, the feasibility of the positioning estimation system was verified through simulations and experiments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.47 no.3
• /
• pp.95-103
• /
• 2024

The diversity of smart EV(electric vehicle)-related industries is increasing due to the growth of battery-based eco-friendly electric vehicle component material technology, and labor-intensive industries such as logistics, manufacturing, food, agriculture, and service have invested in and studied automation for a long time. Accordingly, various types of robots such as autonomous mobile robots and collaborative robots are being utilized for each process to improve industrial engineering such as optimization, productivity management, and work management. The technology that should accompany this unmanned automobile industry is unmanned automatic charging technology, and if autonomous mobile robots are manually charged, the utility of autonomous mobile robots will not be maximized. In this paper, we conducted a study on the technology of unmanned charging of autonomous mobile robots using charging terminal docking and undocking technology using an unmanned charging system composed of hardware such as a monocular camera, multi-joint robot, gripper, and server. In an experiment to evaluate the performance of the system, the average charging terminal recognition rate was 98%, and the average charging terminal recognition speed was 0.0099 seconds. In addition, an experiment was conducted to evaluate the docking and undocking success rate of the charging terminal, and the experimental results showed an average success rate of 99%.

• Journal of the Economic Geographical Society of Korea
• /
• v.7 no.2
• /
• pp.261-281
• /
• 2004

The location of auto industry in Jeon-buk is due to the strategies for secure a low-priced industrial site of the auto assembly companies, which attained to quantitative growth stage in the early part 1990's, and the regional balanced development policy by the location of leader enterprise of the government. As a consequence of the reversal development pattern that is located the auto parts firm after locating the auto assembly companies, the Jeon-buk auto industry has many structural vulnerability. First, because of the lack development of auto parts industries, the auto assembly companies located in Jeon-buk are dependent many auto parts at a external region. Second, most of auto parts firm belongs to the singular assembly company exclusively. And the majority of auto parts industries are the low value-added products that are necessary a simple labor power. Third, the agglomeration undeveloped of associated industries with automobile caused a low competitiveness of invitation a manufacturing company as against other provinces. For a regional economic development by the auto industry, it is necessary a flexible regional structure of production through an agglomeration of associated industries. The geographical proximity between an assembly company and a parts firms is an important locational factor with the induction of Just-in-Time production system and a modularization in the auto industry. And a modularization applies to more new factory than the existing factories. So that, Jeon-buk self-government has to create an amicable industrial environment, try to attract an auto parts enterprises and plan an agglomerated industrial complex that is able to supply a parts modulated to assembly company.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.119-124
• /
• 2006

The present study evaluated the accuracy of MSD-related work criterion of Korea Ministry of Labor by using ergonomic workload evaluation methods. 1,948 manufacturing works in automobile industry were divided into 1,286 MSD-related risky works and 662 risk-free ones by using RULA, ANSI Z-365 and perceived discomfort evaluation. Then, the two types of works were evaluated by Labor Ministry work criterion to analyze the classification accuracy of the work criterion. The work criterion of Korea Labor Ministry had low hit and false alarm ratio(20 and 11%) and high miss and correct rejection ratio(80 and 89%), and the odd ratios of hit and correct rejection were 0.2 and 8.3, respectively. It can be concluded that the work criterion of Korea Labor Ministry is a conservative evaluation method which tends to evaluate a target work as risk-free.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.405-415
• /
• 2014

Objectives: The aim of this study is to comprehensively summarize endotoxin levels reported in operations using metalworking fluids(MWFs). Methods: An extensive literature review was conducted of studies reporting endotoxin levels in processes using metalworking fluids. Keyword search terms included 'metalworking fluids', 'machining fluids', 'metalworking operation', 'machining operation' and 'endotoxin', which were used in combination. Results: A total of ten manuscripts were found to report on airborne endotoxin levels from metalworking operations in the automobile industry. Polycarbonate(PC), polyvinyl chloride(PVC) and mixed cellulose ester(MCE) were used to collect airborne endotoxin. Limulus Amebocyte Lysate was mainly used to quantify endotoxin amount. The levels of airborne endotoxin reviewed varied considerably, ranging from < $4EU/m^3$ to $790EU/m^3$, which was found to be far lower than those from cotton and potato processing plants, sawmills, and poultry farms. Several studies assumed that exposure to endotoxin could be a causative agent of respiratory diseases. Conclusions: Inhalation endotoxin exposure levels reported from metalworking operations were found to be lower than those from industries handling organic materials, even though it could be considered as a possible cause for several respiratory diseases.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.3071-3085
• /
• 2017

Currently, various technological models and services are emerging because of the development of information and communication technology and the convergence of industries. The ICT car field is expanding because of technological convergence in the automobile industry. However, ICT convergence services are still being developed based solely on technology; characterization of users and their needs is lacking. Therefore, two types of ICT car services that apply human-centered design processes are developed in this study. These processes create services and models while considering the quality and functions of products based on users (instead of technology) when developing products or services. Usability evaluation was performed on the developed services; a human-centered design process was applied to the results to confirm that the derived services resulted in high satisfaction. In the future, these research results will provide useful applications when developing ICT car services and strategies.

• Transactions of Materials Processing
• /
• v.28 no.6
• /
• pp.321-327
• /
• 2019

In this study, a hot and cold forging process was investigated to produce a complex-shaped hub of dual clutch transmission with low material loss and high productivity. The process was designed by the commercial finite element (FE) analysis program, DEFORM-2D (hot forging) and 3D (cold forging). And, the material flow and ductile fracture characteristics were studied to check the surface crack initiation of the specimen. The simulation results indicated that the proposed process could manufacture the complex-shaped hub with no surface crack and high-efficiency compared to the conventional machining process. For verification the numerical results, the hub of the SCM440 was fabricated by the proposed process and the mechanical properties and microstructure evolution were studied. It was demonstrated that the suggested hot and cold forging process might be useful in producing the key components of the automobile industry as a high-efficiency and environmentally friendly process.