• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.925-928
• /
• 1995

Recently, the system of the industry demands quick and accurate measurement for the mass production and high quality. Also, we need to improve the accuracy to decrease the failure rate in automatic assembly processing and improve the confidence, durability and the compatibility of parts. To answer this tendency and requirement, we have developed many accrate measuring instruments and methods. In this paper, we develop the whidows program using the DSP board(TMS320C25) which is used the data acquisition and the Visual C $^{++}$ , a windows programming language. We perform the measurement, analysis and output process in GUI(Graphic User Interface)environment. By using system, we will save the time required for the hand-worked measurement and avoid the useless iterative measurement. Furthermore, we expect to improve the productivity through automotive quality control in manufacturing process.s.

• International Journal of Contents
• /
• v.9 no.4
• /
• pp.102-112
• /
• 2013

Using data on the U.S. automobile industry between 1979 and 1999, we have investigated the impact of inter-divisional domain overlap on a division's product differentiation vis-$\grave{a}$-vis sister divisions. The results show that the higher the level of inter-divisional domain overlap, relative to the focal division's own domain, the higher the chances of locating a new product closer to the existing products of a sister division, thereby decreasing product differentiation vis-$\grave{a}$-vis this sister division. We argue that this is due to a high level of similar capabilities between the two divisions and the division with less distinctive capabilities may have little choice but to launch a new product that is close to the products of the other division.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.206-215
• /
• 2002

It is to be classified into friendly environment and safety problems, as a main technology development of the recent automotive industry. As these tendency, lots of automobile companies focus on a reduction of fuel expenses and strengthen of crash safety using high strength steel. In this study advanced technologies such as tailored blanks, aluminum extrusion and high strength steel forming applied to bumper beam will be described. As a result of impact analysis and an actual impact test, in terms of beam performance and a possibility fur the mass production will be discussed.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.343-349
• /
• 2007

One of the useful technologies for light-weightening of components required in the automobile and machine industry is to use high strength materials. To improve material properties, the carbonizing treatment, nitrifying treatment, and shot-peening method are representatively applied. However, the shot-peening method is generally used to remove surface defect on steel and to improve the fatigue strength of the surface. Benefits of shot-peening are increasing resistance against fatigue, stress corrosion cracking, fretting, galling, erosion and closing of pores. In this paper, the effect of shot-peening on the corrosion of SUP-9 steel immersed in a 3.5% NaCl solution and corrosion characteristics from heat treatment during the shot peening process has been investigated. The immersion test was performed on four kinds of specimens. Corrosion potential, the polarization curve, residual stress etc. Were analyzed from the experimental results.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.128-134
• /
• 2015

This research is that analyze multi-body system that have flexible and rigid body. Transfer robots are widely used mainly in automobile industry owing to its capability to handle heavy parts with high speed in wide range of movement. For the transfer robots to widen the application area, a new three-axis mechanism with heavy payload has been recently developed in consideration of the strength and stiffness. For the purpose, transient dynamic analysis is carried out to find the component position yielding a certain time. Though this research, we can analysis stress distribution and deformation of robot component.

• Journal of the Korean Society of Safety
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2010

The tensile and fatigue experiments were conducted with tensile-shear specimens for investigating the strength of adhesive bonded and mechanical press joints of SPCC steel sheet used in the field of the automobile industry. The optimal punch press force was evaluated 50kN for combining epoxy adhesive bonding and mechanical press joining with a diameter of 8.3mm using SPCC sheet with a thickness of 0.8mm. The combining epoxy adhesive bonding and mechanical press joining exhibits the maximum tensile force of 750N. The fatigue strengths of the combination of adhesive bond and mechanical press joint and pure adhesive joint were evaluated 370N and 320N at 106cycles, respectively. These values correspond to 22% and 20% of their maximum tensile forces, respectively. However, the fatigue strength of the combination of adhesive bond and mechanical press joining was much lower than that of pure mechanical press joining.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.847-852
• /
• 2004

The virtual engineering technologies have been broadly used for the design, testing, manufacturing and maintenance works of industrial product. Recently many VR systems with walk through navigation and web databases; such as design and installation database. load history database, maintenance history database et al. are developed. However, the virtual engineering in railroad industry is not well developed compared to other industries like automobile, air, shipbuilding. In this paper, we explain the strategy that we have applied the virtual engineering technology to the design works of rolling stock and our plan to build the virtual testing laboratory(VTL) in the Korea Railroad Research Institute.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.05a
• /
• pp.575-592
• /
• 2004

In modern dynamic management environment, there is growing recognition that? information & knowledge management systems are essential for CEO's efficient/effective decision making. As a key component to cope with this current, we suggest the management performance analysis syystem based on Knowledge Discovery in Database (KDD). The system measures management performance that is considered with both VA(Value- Added), which represents stakeholder's point of view and EVA(Economic Value-Added), which represents shareholder's point of view. The relation ship between management performance and some 80 financial ratios is analyzed, and then important financial ratios are drawn out. In analyzing the relationship, we applied KDD process which includes such as multidimensional cube, OLAP(On-Line Analytic Process), data mining and AHP(Analytic Hierarchy Process). To demonstrate the performance of the system, we conducted a case study using financial data over the 16-years from 1981 to 1996 of Korean automobile industry which is taken from database of KISF AS(Korea Investors Services Financial Analysis System).

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.55-61
• /
• 2010

Many enterprises are looking for counterproposals to be survival through innovation activities and to be held on their continuous businesses for their business management environments nowadays. One of the innovation activities is an improvement of Loss and reinforcement of business structure through Lean, TPM. Another one is an improvement of these innovation activities and have achieved lots of outcomes (profits). But most these activities have been applied for only the industries in Automobile, Semiconductor, Aviation, Construction with large enter in Korea. And most of minor cable enterprises don't even try to import these innovation activities excluding some how the small and medium cable enterprise can import the LEAN / 6 Sigma activities effectively with some of sample in real small and medium cable company.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.153-158
• /
• 2006

Nowadays, hollow upper-shaft of monobloc type has been considered for weight reduction and high quality in the automobile industry. To form the upper-shaft under tube cold extrusion, Taguchi method is applied to optimize the die design in this study. Taguchi method for optimum die design is to establish the optimal combination of design parameters and to reduce a number of experiments. Effect of parameters including the die relief, mandrel, die half angle is investigated and analyzed based on FEA analysis using a FEM commercial software MSC_Marc. Furthermore extrusion experiments have been performed to verify the results investigated in the FEM simulations.