• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.4_2
• /
• pp.501-507
• /
• 2021

In this study, In order to prevent the safety accidents caused by the sliding, to develop the non-slip grating, the stability judgment based on the span length of the grating and the gap of the bearing bar is performed. The structural analysis of Grating was carried out in accordance with the provisions set out in Grating's load-bearing test conditions. As the span length increases, the deflection increases and the stress and span length tend to be proportional to each other. It was shown that the larger the span, the linear increase in stress and exponential increase in deformation of grating. The maximum stress of grating was approximately 58.2 MPa, indicating a very stable safety rate of about 4.3 compared to the yield strength of the grating material. Based on these results, it will be able to be utilized as the basic data for determining the optimal dimensions of non-slip grading by performing optimal designs in the future.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1197-1204
• /
• 2023

Ti-alloy, a high-strength alloy material among the materials used in aircraft that are trending toward lighter weight, is classified as a difficult-to-cut material that requires a lot of energy for cutting. Cutting in a high-temperature environment is considered one means of making this possible, and various studies have been conducted on it. In particular, research on LAM (Laser Assisted Machining (LAM)), which utilizes laser heating of the cutting area, is being actively conducted. Before processing of the milling cutter begins, the temperature is raised locally by the laser irradiated through the laser head carrier, and the resistance during milling is reduced. Therefore, in this paper, in order to derive such conditions, we performed heat transfer analysis according to transfer conditions and compared it with actually applied test data to use it to establish appropriate processing conditions.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.97-105
• /
• 2023

Recently, with the development of artificial intelligence technology, many technologies for user convenience are being developed. Among them, interest in autonomous vehicles is increasing day by day. Currently, many automobile companies are aiming to commercialize autonomous vehicles. In order to lay the foundation for the government's new and reasonable policy establishment to support commercialization, we tried to analyze changes and perceptions of public opinion through news article data. Therefore, in this paper, 35,891 news article data mentioning terms similar to 'autonomous vehicles' over the past three years were collected and network analyzed. As a result of the analysis, major keywords such as 'autonomous driving', 'AI', 'future', 'Hyundai Motor', 'autonomous driving vehicle', 'automobile', 'industrial', and 'electric vehicle' were derived. In addition, the autonomous vehicle industry is developing into a faster and more diverse platform and service industry by converging with various industries such as semiconductor companies and big tech companies as well as automobile companies and is paying attention to the convergence of industries. To continuously confirm changes and perceptions in public opinion, it is necessary to analyze perceptions through continuous analysis of SNS data or technology trends.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.1-9
• /
• 2020

As the aging problem of the regional industry ecosystem has gradually become serious, research to measure and regenerate the regional industry ecosystem decline has been actively conducted. However, little research has been done on regional industry ecosystem crises. Crisis emerges radically over a short period of time, and it is often impossible to respond by post-response, so you must respond before the crisis occurs. In other words, it is more necessary and required when looking at the crisis early and taking a proactive response from a long-term perspective. Therefore, it is necessary to develop a predictive model that can proactively recognize and respond to the crisis in the regional industry ecosystem. Therefore, this study checked the possibility of predicting the risk of regional industry and market according to the emotional score of the news by using large-scale news data. News sentiment analysis was performed using the Google sentiment analysis API, and this was organized by month to check the correlation between actual events.

• International Commerce and Information Review
• /
• v.11 no.1
• /
• pp.95-116
• /
• 2009

Korea-Us FTA negotiation started in February 2006 with a view to overcoming those uncertainties in the global market and was finally concluded in April, 2007. The Agreement was officially signed between ministers two month later and it is expected to be ratified this year even though the process is most likely to be painful in both countries by the political resistances. For the new President of the United States, effective leadership will depends largely on how to encourage domestic industries such as Automobile industry and Iron and Steel industry from the financial crisis. Many trading partners of US worry about US foreign trade policy changes to protectionism that might be unequal to bear. Korea textile industry is one of the major industry in Korea as it occupies 15% of total number of manufacturers, 11% of total employment and 5% of national GDP. Korea-US FTA will provide a breakthrough for bouncing back by exploring new market. US agreed to remove all tariff and non-tariff barriers to 87% of textile items under trading. This study shows that Korean textile industry has been losing it's competitiveness as textile quota system abolished in the year 2005 and has been traced by pursuers such as China, India and Vietnam. In case of woven fabric which was a representing export item of Korea lost price competitiveness against China after 2005. This study seeks the strategy of Korea textile industry in the US market by utilizing the capacity of KOTRA offices in US. All possible statistical data obtained in the US were used for analysing the competitiveness. Fabrics and Garments are analysed independently with a view to finding out real trends of textile market in US. This study also suggest Korea's textile industry strategic ideas obtained from the potential buyers to show the way to penetrate into US market.

• KDI Journal of Economic Policy
• /
• v.27 no.1
• /
• pp.211-238
• /
• 2005

Korea is far behind other OECD countries in economy-wise productivity: Korea's labor productivity in terms of GDP per hour worked is the lowest among OECD countries. Against the existing productivity gap, there is a worrying sign in Korea's investment trend - rapid fall in machinery and equipment investment with slow increase in R&D investment. The challenge facing Korea is how to transform her economy from catching-up model to a knowledge-based one. The paper shows that, in tandem with the structural changes that today's Korean industries are experiencing, industry's innovation system is also changing. Innovation networks are emerging as the result of economy-wise restructuring since the financial crisis of 1997 and, though still not a dominant force, the newly emerging innovation networks will be the main threads of industry's innovation activities in the future. The changes in industrial innovation system would positively contribute in raising the productivity of the Korean economy. The paper contains a case study on Korea's automobile industry in order to highlight some of main characteristics of the structural changes, in addition to a chapter that gives an overview of the evolutionary paths of the Korea's industrial innovation. The paper assesses that changes can be considered as a positive sign of future growth perspective; but there are further challenges to make the Korea's industrial innovation system effective. The list of such challenges includes strengthening upstream sectors of currently leading industries, expanding the innovation base to SME and promoting technological co-operation between domestic firms and foreign firms.

• KDI Journal of Economic Policy
• /
• v.26 no.2
• /
• pp.249-280
• /
• 2004

This paper analyzes the industrial growth of Korea in the 1990s and its relationship with the nation's export performance. The result shows that total factor productivity (TFP) played a significant role in the growth of some industries, where in particular a sharp increase in TFP was observed in the electrics and electronics industry and the automobile industry in the late 1990s. While CEPII RCA indexes for the Korean industries such as IT industry and automobile industry significantly increased since 1998, only limited evidence was found that TFP or TFI influenced RCA. Investigating Korea's export performance in the Northeast Asian context, this paper shows that, in the 1990s, the growth of Korea's exports to Japan was led by industries that recorded relatively fast growth in total factor input (TFI). In contrast, that to China was almost equally contributed by industries that experienced relatively fast growth in TFP or TFI. This paper also investigates competition between Korea and China, and Korea and Japan in the world market. The competition between Korea and China was relatively stronger for the Korean industries to whose growth TFI made a more significant contribution. While no decisive evidence is found for the relationship between TFP growth in Korean industries and their competition against Japan in the world market, it is revealed that the competition between Korea and Japan became less intense for the Korean industries to whose growth TFI made a stronger contribution. In this regard, the paper supports the view of 'nut-cracking' that the Korean economy has lost its competitiveness in the sectors where it maintained comparative advantage, but failed to catch up more advanced countries such as Japan by gaining competitiveness in more capital or technology intensive sectors.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.6 no.3
• /
• pp.1-18
• /
• 2011

Publication Industry of scientific technology is showing tendency of decreasing in sales, which clearly draws down curve since 2000. The printing culture is declining whether it is because of trend avoiding pure science or technological science and engineering, advancement of mass media or increasing frequency of using internet. Nevertheless, researcher considered car industry in publication industry as a life-long purpose for study. For this reason, the researcher tried to find the variables of the marketing which give impact on the customers such as student group and consumer who buys cars, when buying professional books. The found variables are expected to have a huge impact on the publication industry of professional books. As a result of research, in the area of the vision and motive, most said that they have "chosen a major in car because they liked car in usual base." In the stage of recognizing the problem, they buy the books when it is inevitably necessary. In the stage of searching for the information, they get information from advertisements, friends, professors, internet or sales clerk in book stores. In the stage of evaluation, they look for the title and the publication date of the books. In addition, in the stage of deciding purchase, "buy immediately" was the most frequent answer while impulsive purchase is the least frequent answer. In the stage of evaluating after purchase, many of them mostly are satisfied with their purchase.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.817-823
• /
• 2020

In recent, the machining of difficult-to-cut materials such as titanium alloys, stainless steel, Inconel, ceramic, glass, and carbon fiber reinforced plastics (CFRP) used in aerospace, automobile, medical industry is actively researched. Abrasive waterjet is a non-traditional processing method in which ultra-high pressure water and abrasive particles are mixed in a mixing chamber and shoot out jet through a nozzle, and removed by erosion due to collision with a material. In particular, the nozzle of the abrasive waterjet is one of the most important parts that affect the machining quality as with a cutting tool in general machining. It is very important to monitor the condition of the nozzle because the workpiece is uncut or the surface quality deteriorates due to wear, expanding of the bore, damage of the nozzle and clogging of the abrasive, etc. Therefore, in this paper, we propose a monitoring system based on Acoustic Emission(AE) sensor that can detect nozzle condition in real time during AWJ processing.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.4
• /
• pp.265-273
• /
• 2017

Major industries in Gyeongnam area include robot and automobile manufacturing, shipbuilding, and aviation. According to the research, the mechanical part of the products has been advanced, but awareness over the improvement of quality of the software still lacks. The quality performance test presently conducted by the companies in Gyeongnam is mostly the manual performance test performed by the program manager. In order to systematize this and extend the range of using software testing tools, the current study intends to suggest the necessity for conducting a survey on demand to improve performance and securing testing tools such as measured data analysis. Accordingly, this study is going to investigate 33 companies in Gyeongnam related with software in each of the major business areas centering around the actual field and examine activities related to software quality. And after figuring out the current status of retaining testing tools, the study will suggest the ways to enhance recognition over software quality and propose ultimate solutions to solve the problems on the current stage by finding out how to share information as much as possible in order to lay the foundation for extending the range of activity for the sake of software quality.