• 대한의용생체공학회:의공학회지
• /
• 제33권3호
• /
• pp.155-162
• /
• 2012

Devices to measure the blood pressure of patients are being used without any calibration in a hospital. It is an important to show consistent values when any medical devices measure the same patients regardless they are sphygmomanometer or fully automatic electronic blood pressure meter. We compared sphygmomanometer and fully automatic electronic blood pressure meters with standard digital blood pressure monitor (SDBPM) to evaluate the consistency of the small healthy subjects. We measured the blood pressure from six healthy subjects (three of 20~40 years and three of 40~60 years old). Two sphygmomanometer and two fully automatic electronic blood pressure meters were used and compared with the SDBPM. Blood pressures measured from right and left arms each and were compared. All six healthy subjects showed normal blood pressure values. In general, left blood pressure values showed higher values than right side. Comparing SDBPM, with the other monitors, the systolic pressure showed ${\pm}$ 34.8% difference and ${\pm}$ 33.3% for the diastolic pressure. Correlation between SDBPM and Sphygmomanometer was 0.59~0.71, and 0.50~0.70 for fully automated digital BP monitors. It fell in grade-D when we apply the BHS(British hypertension society). AAMI(American association for the advancement of medical instrumentation) also showed unsatisfactory results for the mean value (${\leq}$ 5 mmHg) and standard deviation (${\leq}$ 8 mmHg). We tested sphygmomanometer and fully automatic electronic blood pressure meters and compared with a standard digital blood pressure monitor. All devices showed inconsistent blood pressures. A reliable calibration system is highly needed for all devices in all hospitals.

• 정보관리연구
• /
• 제35권4호
• /
• pp.81-105
• /
• 2004

본 연구에서는 웹기반 질의문을 자동 범주화하는 방안에 대해 조사하였다. 질의문 범주화에 대한 실험은 SVM-light를 사용하여 범주자질로써 유사어 사전을 부여하기 전과 후를 비교하였다. 유사어는 학습을 통해 수작업으로 대상문서에서 713개를 추출하였다. 전체적으로 유사어 부여전과 부여후의 결과는 6개 범주에서 정도율은 -0.01%로 거의 변화가 없었으며 재현율은 8.53%가 향상되었다. F1-Measure 값도 4.58%가 향상되었다. 특히 범주내 정도율과 재현율의 표준편차가 18.39%나 개선되어 적정한 검색효율을 확보할 수 있었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.1429-1430
• /
• 2005

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2505-2510
• /
• 2009

Semiconductor processes need measurement to confirm where there are problems in quality after progresses manufacturing process. This paper suggests equipment and automatic measure sampling method that control monitoring ratio according to change point occurrence availability of process that is not measure method by the existent simple ratio rate. This paper defines measure section as ailment section, metastable section and stability section by change point standard and create statistical model of each section and developed suitable measure rate model by section. As a result, we have accomplished maximum throughput and minimum sampling number that needs to maintain constant level of quality. Proposed method minimizes load of measure process by brings production quality sophistication and decrease of process badness and lowers measure rate in stable section making perception about problem occurrence quick heightening measure rate at change point occurrence.

• Spatial Information Research
• /
• 제15권2호
• /
• pp.181-187
• /
• 2007

수치고도자료를 생성하기 위해서, 항공기 혹은 위성에 탑재된 센서로부터 획득한 입체영상으로부터 자동상관매칭기법에 의해 고도값을 획득하는 연구가 수행되어 왔다. 자동상관매칭에 의한 결과값은 센서의 각도 및 수목 등에 의해 지표고도를 직접 추출하는데는 한계가 있고 영상내 지형지물 분포에 의해 고도값의 수정, 편집량이 결정된다. 본 연구는 수목차폐율과 수목고 자료가 자동상관매칭 고도 결과값에 미치는 영향을 분석하였다.

• International Journal of Automotive Technology
• /
• 제3권2호
• /
• pp.57-62
• /
• 2002

It is well known that the entrained air in oil causes appreciable reduction in the stiffness of hydraulic systems. It makes the response delay of the systems and sometimes destroys the stability. Because the hydraulic systems of automatic transmissions are operated in relatively low pressure and high temperature, it is very important to analyze the effects of the air included in automatic transmission fluid. However, it is difficult to derive the generalized model to describe the effective bulk modulus theoretically or measure it in actual operating conditions of automatic transmissions. This paper reviews previous studies of the air effects in hydraulic systems and the measurement techniques of the effective bulk modulus in operating conditions. Based on this work, the theoretical model with moderate complexity and the measurement technique of the effective bulk modulus considering entrained air effect at real operating conditions are suggested. Our paper also shows that the quantity of the entrained air in the automatic transmission fluid can be estimated from the experimental results.

• 한국콘텐츠학회논문지
• /
• 제9권10호
• /
• pp.1-12
• /
• 2009

본 논문은 한 마디 내에서 나타나는 음표들을 조합했을 때 규칙적인 배수관계가 있음을 이용하여 단음으로 구성된 노래에서 정확하게 마디 위치를 찾는 방법을 제안한다. 제안된 방법에서는 먼저 노래의 개별음의 길이들을 찾아내고, 이들 개별음 길이들의 배수관계를 적용한 규칙들을 이용한다. 이렇게 찾아진 마디정보는 자동 음악 채보 시스템의 사전 정보로 활용될 수 있는 박자 및 빠르기 등을 위한 원천적인 정보를 추출하는데 활용될 수 있다. 남성 및 여성의 단음으로 구성된 12곡의 노래들에 대한 실험 결과 1곡을 제외한 11곡 노래들의 마디위치를 정확히 검출 했으며, 이렇게 찾은 마디 정보와 음악적 이론을 이용하여 곡의 박자 및 빠르기 정보 등을 추출할 수 있다.

• 펄프종이기술
• /
• 제44권2호
• /
• pp.18-28
• /
• 2012

This study was to develop a novel automatic system for measuring St$\ddot{o}$ckigt sizing degree and contact angle at a time. The conventional methods to measure sizing degree had serious problems in obtaining significant differences according to different dosages of a sizing agent, and moreover they disclosed unique limitation due to liquid types used and tester's subjectivity. However, the newly developed system could get reproducible results through total automation of all procedures including liquid dropping, image acquisition and measurement of both St$\ddot{o}$ckigt sizing degree and contact angle. For the St$\ddot{o}$ckigt sizing test, the automatic system could measure sizing degree with more definite differences according to different dosage of AKD, compared to the conventional method. For the contact angle test, the automatic system showed a similar trend to the conventional method but had smaller contact angles due to distortion of an image focus by a sheet curl than the conventional testing machine. The problem from the image out of focus due to specimen curl will be overcome with adopting a new specimen holder for the future system.

• 한국대기환경학회지
• /
• 제27권6호
• /
• pp.734-745
• /
• 2011

In this article, we reviewed the monitoring status of hazardous VOC in ambinet air in Korea and some developed countries such as USA, Japan, and UK. In many countries, two types of VOC monitoring stations are being operated, i.e., for hazardous VOC and photochemical VOC. Each country has different target VOC but all includes benzene. Korea, Japan, and UK have a national ambient air quality standard for benzene, but no national standard has been established in the USA. For sampling of the hazardous VOC, the adsorbent method is adopted in Korea and UK, while the canister method is used in the USA. Both of adsorbent and canister methods are used in Japan. USA and UK have only non-automatic method to measure the hazardous VOC, and the individual samples are being sent to their national laboratories for integrated analysis. On the other hand, Korea and Japan have automatic and nonautomatic methods to measure the hazardous VOC. Local governments or regional environmental agencies in Korea and Japan have the authorization for the sampling and analysis of VOC. According to a field study to evaluate the performance of automatic VOC monitoring system, controlling the moisture in the air sample was identified as the most important problem. However, careful attention must be given to using a moisture removing device such as Nafyon dryer, because of unexpected artifacts formation. In order to have reliable data, it is highly recommended not only to use internal standards, but to use appropriate hydrophobic adsorbents as a cold trap in any automatic on-line VOC monitoring system.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.488-493
• /
• 2006

Accurate river discharge is the most important factor in managing river basins and for successfully maintaining total maximum daily loads in Korea. It is not easy to measure the discharge directly in large rivers owing to physical and environmental constraints, even after investing much time and money. Recently, to overcome these historical drawbacks in river discharge measurement, we have developed the Automatic Discharge Acquisition & Management System (ADAMS) that scans the river cross-section and measures each cell $(1m{\times}1m)$ velocity using HADCP. The hardware system is composed of an HADCP sensor and winch, as well as a PC and software system for the discharge calculation module and hardware control module. It is controlled remotely via the internet and uses the velocity-depth integration method and the velocity-contour method for calculating river discharges. The characteristics of ADAMS are a ubiquitously accessible system, featuring real time automatic discharge measurement, remote control via the internet. The results using ADAMS at the Jindong stage site show less than 5% uncertainty and are 4 times more efficient than the ADCP & Q-boat system. This system can be used to measure any large river, river mouth or tributary river affected by backwater, all of which have a very difficult measuring real time discharge. The next generation of ADAMS will feature an upgrade to increase portability and GPS integration.