• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1799-1800
• /
• 2006

ATPS(Automatic Transmission Position Sensor) is the position sensor of an automatic transmission which transforms the gear changes into the electrical signals and transmits them to TCU. This paper deals with an development of the sensor output signal analysis system for ATPS inspection using LabVIEW. The developed system is designed to carry easily, and it can be installed for inspection directly in a car fitted with an automatic transmission. The system can not only detect the output signals of the sensor but also inspect the sensor behavior under the running state of a car. For this, the system is designed to control the position and the speed of motor. Also, it has the database system for the systematic output data management and the convenient GUI for user.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.438-443
• /
• 2008

In this paper, segmenting and classifying low contrast defects on flat panel display is one of the key problems for automatic inspection system in practice. Problems become more complicated when the quality of acquired image is degraded by the illumination irregularity. Many algorithms are developed and implemented successfully for the defects segmentation. However, vision algorithms are inherently prone to be dependent on parameters to be set manually. In this paper, one morphological segmentation algorithm is chosen and a technique using frequency domain analysis of input images is developed for automatically selection the morphological parameter. An extensive statistical performance analysis is performed to compare the developed algorithms.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.967-970
• /
• 1988

This paper deals with automatic system of acoustic noise detection for realization of factory automation. The existing inspection process of failure products has mostly been executed in hand by rich-experienced workers. It is difficult to accomplish effectively or systematically the failure test of products owing to the diversality of ill-conditions. But the problem about it must be solved in viewpoint of cost down and factory automation in addition to the reliability of products. The necessity of automatic inspection system to inspect automatically undesirable acoustic noise of products which is one of the kinds of failure is suggested, and the procedure to develope it and the function of each system components are explained briefly.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.197-202
• /
• 2005

An aspheric lens is one of a key point optical element in the optical industry. The feature of an aspheric lens is not to have the spherical aberration. An aspheric lens is also essential element for high-precision and light-weight in the optical machine. Generally it have been used in a tailor progression an aspheric lens modelling much. In this study we applied a lay back-tracer using a index of refraction to draw a creative aspheric lens. Also we developed the automatic design program for aspheric lens. We manufactured the aspheric lens and executed a comparison experiment for refraction situation of shape and straightness experiment to inspect the drawn aspheric lens in this study.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.1
• /
• pp.51-55
• /
• 2014

In this paper, an hybrid automatic focusing method has been proposed for speedy and reliable measurement and inspection in industry. It can improve reliability of focusing position by using not a focusing measure but the hybrid one that is incorporated with sobel operator and auto-correlation. Also, it can not only reduce control time of focusing position using adaptive step size, but also improve accuracy of focusing position by gaussian interpolation. Its performance is verified by experiments. It is expected that it can apply to optical system for measurement and inspection in industry fields.

• The Journal of Korea Robotics Society
• /
• v.5 no.1
• /
• pp.77-84
• /
• 2010

This paper proposes a bridge inspection system using a robot to manage the safety status of bridges. A conventional bridge inspection has a lot of problems because inspection is conducted manually by human. As an alternative, we are to develop a robot system having machine vision and this robot system is mounted on an end linkage of specially designed car having seven DOF (Degrees Of Freedom) to inspect cracks beneath bridge. This system is able to check a status of the bridge and record its changes every other year. As a result, the developed robot system offers us the inspection result of quality and reliability about the bridge inspection status. Also, we have tested the effectiveness of the suggested system through outdoor experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.8
• /
• pp.995-1000
• /
• 1999

This paper presents a optic system and a visual inspection algorithm looking for solder joint defects of J-lead chip which are more integrate and smaller than ones with Gull-wing on PCBs(Printed Circuit Boards). The visual inspection system is composed of three sections : host PC, imaging and driving parts. The host PC part controls the inspection devices and executes the inspection algorithm. The imaging part acquires and processes image data. And the driving part controls XY-table for automatic inspection. In this paper, the most important five features are extracted from input images to categorize four classes of solder joint defects in the case of J-lead chip and utilized to a back-propagation network for classification. Consequently, good accuracy of classification performance and effectiveness of chosen five features are examined by experiment using proposed inspection algorithm.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.6
• /
• pp.626-634
• /
• 2011

The investigation of concrete structure typically relies on visual inspection which is one of the basic inspection techniques. Image processing techniques play a crucial role in the growing field of automatic surface inspection technique. However, kinds of inspection equipment, environmental condition and detection algorithm have much influence on the reliability of inspection result. This paper proposes a verification method and testing procedure for the reliability of inspection results and surveys characteristics of image acquisition systems and crack inspection algorithms.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.157-158
• /
• 2019

Reinforcing bars are an important material for tensile strength of structures. For this reason, the inspection of the reinforcing bars confirming the layout and omission is very important for the safety of the structures. However, the current method of inspecting of the reinforcing bars through photographs of specific areas is difficult to identify condition all reinforcing bars. And It is also difficult to confirm after completion of a building. Therefore, reinforcing bar inspection using 3D scanner is required for automation of rebar inspection and database construction. For this purpose, this study test application of automated inspection method for rebar inspection using 3D scanner and discuss the effect of this method.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.2
• /
• pp.255-265
• /
• 1995

Due to advances in automated manufacturing systems and automatic inspection equipment, complete inspection has drown increased attention recently and has become a widespread practice. In a complete inspection plan all of the items are subject to acceptance inspection If an item fails to meet the predetermined specifications, it is rejected. In this paper, economic complete inspection plans are developed in situations where rejected items are reworked Complete inspections based on the performance variable of interest or a variable which is correlated with the performance variable are considered. Cost models are constructed which involve cost incurred by imperfect quality rework cast and quality inspection cost Methods of finding the optimal complete inspection plans are presented and numerical examples are given.