• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.321-329
• /
• 2006

The ultimate target cf this study is to develop ship's Digital Compass that can substitute for conventional ship's Magnetic Compass. At first, a new Digital Compass system consisting of three-axis Flux-gate sensors and small sized step motor was developed Then, new deviation adjustment theory incorporating with Kalman filter method was proposed through which automatic deviation analysis and correction are obtainable without ship's swinging procedures. The effectiveness of developed Digital Compass and proposed deviation adjustment theory are verified throughout the performance evaluation tests on the training ship 'SAE-NU-RI'.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.734-737
• /
• 2008

This paper presents a new automatic TFT-LCD image quality optimization system. We also have developed new algorithms using 6-point programmable matching technique with reference gamma curve, and automatic power setting sequence. It optimizes automatically gamma adjustment and power setting registers in mobile TFT-LCD driver IC to reduce gamma correction error, adjusting time, and flicker. Developed algorithms and programs are generally applicable for most of the TFT-LCD modules. The proposed optimization system contains module-under-test (MUT, TFT-LCD module), control program, multimedia display tester for measuring luminance and flicker, and control board for interface between PC and TFT-LCD module. The control board is designed with DSP, and it supports various interfaces such as RGB and CPU. Developed automatic image quality optimization system showed significantly reduced gamma adjusting time, reduced flicker, and much less average gamma error than competing system. We believe that the proposed system is very useful to provide high image quality TFT-LCD and to reduce developing process time using optimized gamma-curve setting and automatic power setting.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.11
• /
• pp.757-764
• /
• 2013

The estimation of maintenance cost of information system so far has been conducted centered on the ordering body, so the problem of provider's having to cover the cost due to small cost compared to the amount of work is not solved. This study is a base study for estimating the maintenance cost of information system centered on provider, and it deduces cost items of maintenance and suggests adjustment factors for adjusting the gap between the ordering body and provider regarding the maintenance cost. In order to deduce the cost items of maintenance, this study adds the activities of the provider for maintenance to the base study of cost factors regarding the existing maintenance activity, divides, and classifies them into the fixed cost and variable cost. In order to adjust the gap between the ordering body and provider regarding the maintenance cost, this study found the adjustment factors such as the code, utility, and components created by the automatic tool that was not included when estimating the maintenance cost centered on the ordering body. After examining and analyzing K Company's data of maintenance performance for three years, it confirmed that the gap regarding the adjustment factors was about 13% in case of K Company.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.698-704
• /
• 2010

The machine vision system has been widely applied at automatic inspection field of the industries. Especially, the machine vision system shows good performance at difficult inspection field by contact method. In this paper, the automatic system of a slant method to inspect screw/bolt shape using machine vision is developed. The inspection system uses pattern matching method that search similar degree of the lucidity, the average lucidity, length and angle of inspection set up area using a circular scan and a line scan method. Also the feeding method for inspection product is the slant method, and feed rate is controlled by the ramp angle adjustment. This inspection system is composed of a feeding device, a transfer device, vision systems, a lighting device and computer, and is composed the sorting discharge system of the inferior product. The performance test carried out the feeding speed, the shape correct degree and the sorting discharge speed according to the type of screw/bolt. This sorting inspection system showed a satisfied test results in whole inspection items. Presently, this sorting inspection system is being used in the manufacturing process of screw/bolt usefully.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.191-199
• /
• 1993

Investigation is given to the detailed procedure of a computer assisted automatic technique for ortho-image generation from digital stereo image data of close-range photographs scanned by the CCD camera scanner. After rectification of geometric scanning errors, the bundle adjustment technique was used to determine the exterior orientation parameters of terrestrial camera. An automatic correlation matching technique was applied to search for the conjugate pixels in digital stereo pairs. And the 3-dimensional coordinates of the corresponding pixels were calculated by the space intersection method. For the generation of ortho-image from the calculated coordinates and right image data values, inverse-weighted-distance average method was used. And the accuracy of the resulting ortho-image was checked by comparing its image coordinates with there corresponding ground coordinates for the check points.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.288-291
• /
• 1999

The PID (Proportional-Integral-Derivative) controller is widely used in the industries for more than fifty years with the well known Ziegler-Nichols tuning method and others varieties. However, most of the PID controller being used in the real practice still require trial and error adjustment for each process after the tuning method is done, which is consuming of time and needs the operator experiences to obtain the best results for the controller parameter. In order to reduce the inconvenience in the controller tuning, this paper presents a design of an automatic PID controller parameter analyzer being used as a support instrument in the industrial process control. This analyzer is designed based on the tuning formula of Dahlin to synthesize the PID controller parameter. Using this analyzer, the time to be spent in the trial and error procedures and its complexity can be neglected. Experimental results using PID controller parameter synthesized from this analyzer to the liquid level control plant model and the fluid flow control plant model show that the responses of the controlled systems can be efficiently controlled without any difficulty in mathemathical computation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.754-757
• /
• 2007

This paper presents automatic LCD gamma control system using gamma curve optimization. It controls automatically gamma adjustment registers in mobile LCD driver IC to reduce average gamma error and adjusting time. The proposed gamma system contains module-under-test (MUT, LCD module), PC installed with program, multimedia display tester for measuring luminance, and control board for interface between PC and LCD module. We have developed a new algorithm using 6-point programmable matching technique with reference gamma curve. Developed algorithm and program are generally applicable for most of the LCD modules.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.62-73
• /
• 2020

In this paper, we present electronic acupuncture needles we have developed using intelligence technology based on Bluetooth in order to allow anyone to simply receive customized remote diagnosis and treatment by clicking on the menu of the smartphone regardless of time and place. In order to determine the health condition and disease of patients, we have developed a software and a hardware of electronic acupuncture needles, operating on Bluetooth which transmits biometric data to oriental medical doctors using the functions of automatically determining pulse diagnosis, tongue diagnosis, and oxygen saturation; the functions are most commonly used in herbal treatment. In addition, using fuzzy logic and reasoning based on smartphones, we present in this paper an algorithm and the results of completion of hardware implementation for electronic acupuncture needles, appropriate for the body conditions of patients; the algorithm and the hardware implementation are for a treatment time duration by electronic acupuncture needles, an automatic determinations of pulse diagnosis, tongue diagnosis, and oxygen saturation, a function implementation for automatic display of acupuncture point, and a strength adjustment of electronic acupuncture needles. As a result of our simulation, we have shown that the treatment of patients, performed using an Electronic Acupuncture Needles based on intelligence, is more efficient compared to the treatment that was performed before.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.100-108
• /
• 2023

In this study, a neural network model inspired by a one-dimensional convolution U-net is developed to automatically accelerate edge localized mode (ELM) detection from big diagnostic data of fusion devices and increase the detection accuracy regardless of the hyperparameter setting. This model recognizes the input signal patterns and overcomes the problems of existing detection algorithms, such as the prominence algorithm and those of differential methods with high sensitivity for the threshold and signal intensity. To train the model, 10 sets of discharge radiation data from the KSTAR are used and sliced into 11091 inputs of length 12 ms, of which 20% are used for validation. According to the receiver operating characteristic curves, our model shows a positive prediction rate and a true prediction rate of approximately 90% each, which is comparable to the best detection performance afforded by other algorithms using their optimized hyperparameters. The accurate and automatic ELM-burst detection methodology used in our model can be beneficial for determining plasma properties, such as the ELM frequency from big data measured in multiple experiments using machines from the KSTAR device and ITER. Additionally, it is applicable to feature detection in the time-series data of other engineering fields.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.1
• /
• pp.17-28
• /
• 2010

This paper presents a new automatic TFT-LCD image quality optimization system using DSP for the first time. Since conventional manual method depends on experiences of LCD module developers, it is highly labor-intensive and requires several correction steps providing large gamma correction error. The proposed system optimizes automatically gamma adjustment and power setting registers in mobile TFT-LCD driver IC to reduce gamma correction error, adjusting time, and flicker. It contains module-under-test (MUT, TFT-LCD module), PC installed with program, multimedia display tester for measuring luminance and flicker, and control board for interface between PC and TFT-LCD module. We have developed a new algorithm using 6-point programmable matching technique with reference gamma curve and applying automatic power setting sequence. Developed algorithm and program are generally applicable for most of the TFT-LCD modules. It is realized to calibrate gamma values of 1.8, 2.0, 2.2 and 3.0, and reduce flicker level. The control board is designed with DSP and FPGA, and it supports various interfaces such as RGB and CPU. Developed automatic image quality optimization system showed significantly reduced gamma adjusting time, reduced flicker, and much less average gamma error than conventional manual method. We believe that the proposed system is very useful to provide high-quality TFT-LCD and to improve developing process using optimized gamma-curve setting and automatic power setting.