• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.22-35
• /
• 1999

The block assembly process takes more than half of the total shipbuilding processes. Therefore, it is very important to have a practically useful block assembly process planning system which can build plans of maximum efficiency with minimum man-hours required. However, the process plans are often not readily executable in the assembly shops due to severe imbalance of workloads. This problem arises because the process planning is done on block by block basis in current practice without paying any attention to the load distribution among the assembly shops. this paper presents the development of an automated hull block assembly process planning system which results in the most effective use of production resources and also produces plans that enable efficient time management. If the load balance of assembly shops is to be considered at the time of process planning, the task becomes complicated because of the increased computational complexity. To solve this problem, a new approach is adopted in this research in which the load balancing function and process planning function are iterated alternately providing to each other contexts for subsequent improvement. The result of case study with the data supplied from the shipyard shows that the system developed in this research is very effective and useful.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권10호
• /
• pp.410-417
• /
• 2006

Generally, the training set of maximum $m{\times}L(m+f)$ patterns in the pattern recognition method is required for the real-time bus reconfiguration strategy when a main transformer fault occurs in the distribution substation. Accordingly, to make the application of pattern recognition method possible, the size of the training set must be reduced as efficient level. This Paper proposes a methodology which obtains the minimized training set by applying the pattern clustering method to load patterns of the main transformers and feeders during selected period and to obtain bus reconfiguration strategy based on it. The MaxMin distance clustering algorithm is adopted as the pattern clustering method. The proposed method reduces greatly the number of load patterns to be trained and obtain the satisfactory pattern matching success rate because that it generates the typical pattern clusters by appling the pattern clustering method to load patterns of the main transformers and feeders during selected period. The proposed strategy is designed and implemented in Visual C++ MFC. Finally, availability and accuracy of the proposed methodology and the design is verified from diversity simulation reviews for typical distribution substation.

• 한국습지학회지
• /
• 제21권4호
• /
• pp.305-311
• /
• 2019

최근 전 지구적인 기후변화는 예측이 어려운 이상 기후를 발생시키며 기존의 기후에 맞추어 수립된 재해 대응 방안으로는 충분한 방어 및 완화조치가 이루어지지 않고 있다. 특히, 반복되는 집중호우는 견고하게 구성되었던 도심지 홍수방어 체계에서도 피해를 발생시키고 있다. 따라서 본 연구에서는 강우의 공간적인 분포와 도시 특성을 고려하여 유출량의 변화를 분석하였으며, 이는 특정 지역에 집중되는 강우 양상과 불투수층이 많은 도시의 유출특성에 대한 연구이다. 서울 지역에서 한 곳에 집중되는 강우의 경우, 유역의 유입량 및 유출량 계산이 정확하게 이뤄지기 위해서는 유역에 내린 강우를 정확하게 측정해야 한다. 본 연구는 서울 기상청에서 제공 하고 있는 종관기상관측장비(Automated Surface Observing System, ASOS)와 방재 기상관측장비(Automatic Weather Stations, AWS)로 관측된 강우자료를 이용하여 서울 용답 빗물펌프장 유역과 가산1빗물 펌프장 유역에서의 유출량을 EPA-SWMM 모형을 사용하여 산정하고, 비교·분석을 하였다. 빗물펌프장 유역은 불투수 면적이 대부분인 작은 도시 유역이므로, ASOS 자료를 사용할 경우에는 유역과 강우 관측 지점의 거리가 멀어, 유역 내 내린 강우와 상이한 강우 자료를 이용하여 유출량을 계산하게 되는 경우가 많다. 본 연구에서는 유역 근처에 위치한 AWS에서 관측한 강우자료와 유역에서 멀리 떨어진 ASOS에서 관측한 강우자료의 차이를 분석하고, 이에 따라 달라지는 유출량을 계산하였다. 이를 통해 정확한 강우량을 사용하여 빗물펌프장을 운영하거나 도시 홍수 홍수 예보 등을 수행해야 한다는 것을 알 수 있었다. 또한, 본 연구의 결과는 설계강우량 산정 및 유출량 계산에 도움이 될 수 있을 것으로 판단된다.

• 전자공학회논문지B
• /
• 제33B권11호
• /
• pp.53-61
• /
• 1996

In this paper, efficient techniques for solder joint inspection have been described. Using three layers of ring shaped LED's with different illumination angles, three frames of images are sequentially obtained. From these images the regions of interest (soldered regions) are segmented, and their characteristic features including the average gray level and the percentage of highlights - refereed to as 2D features - are extracted. Based on the backpropagation algorithm of neural networks, each solder joint is classified intor one of the pre-defined types. If the output value is not in the confidence interval, the distribution of tilt angles-referred to as 3D features - is claculated, and the solder joint is classified based on the bayes classfier. The second classifier requires more computation while providing more information and better performance. The proposed inspection system has been implemented and tested with various types of solder joints in SMDs. The experimental results have verified the validity of this scheme in terms of speed and recognition rate.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1399-1410
• /
• 2003

In this paper, we develop a joystick manual driving algorithm for an electric vehicle called Cycab. Cycab is developed as a public transportation vehicle, which can be driven either by a manual joystick or an automated driving mode. The vehicle uses six motors for driving four wheels, and front/rear steerings. Cycab utilizes one industrial PC with a real time Linux kernel and four Motorola MPC555 micro controllers, and a CAN network for the communication among the five processors. The developed algorithm consists of two automatic vehicle speed control algorithms for normal and emergency situations that override the driver's joystick command and an open loop torque distribution algorithm for the traction motors. In this study, the algorithm is developed using SynDEx, which is a system level CAD software dedicated to rapid prototyping and optimizing the implementation of real-time embedded applications on distributed architectures. The experimental results verify the usefulness of the two automatic vehicle control algorithms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1307-1311
• /
• 2004

This paper deals with an automated computer-aided process planning and die design system by which designer can determine operation sequences even if they have a little experience in process planning and die design for axisymmetric products. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. They can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution on the level of the required forming loads by controlling the forming ratios. Especially in die design module an optimal design technique and horizontal split die were investigated for determining appropriate dimensions of components of multi-former die set. It is constructed that the proposed method can be beneficial for improving the tool life of die set at practice.

• 품질경영학회지
• /
• 제31권3호
• /
• pp.114-125
• /
• 2003

In this paper, we deal with the problem of modeling of agent-based robot manufacturing cell. Its role is becoming increasingly important in automated manufacturing systems. For Object Oriented & Queueing Petri Nets (OO&QPNs), an extended formalism for the combined quantitative and qualitative analysis of different systems is used for structure and performance analysis of mobile robotic cell. In the case study, the OO&QPN model of a mobile robotic cell is represented and analyzed, considering multi-class parts, non-preemptive priority and alternative routing. Finally, the comparison of performance values between Shortest Process Time (SPT) rule and First Come First Serve (FCFS) rule is suggested. In general, SPT rule is most suitable for parts that have shorter processing time than others.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.55-56
• /
• 1996

In order to investigate the spatial orientation of the spin vectors of galaxies in the Virgo cluster, we carried out a detailed identification of all the certain and possible member disk galaxies with four UK Schmidt Telescope (UKST) III a-j direct plates digitized by the Automated Plate Measuring System (APM). As a result, a relatively large and complete database with no selection effect of the member galaxies has been established. We provide the APM measured values of the position angle (P.A.) and diameters at the isophotal level of 24.5 $m_j / arcsec^2$. Based on this newly generated database, an initial study on the spatial orientation of the spin vectors of galaxies in the Virgo cluster is shown.

• 한국수산과학회지
• /
• 제50권2호
• /
• pp.195-206
• /
• 2017

Joint time-frequency images of the broadband echo signals of six fish species were obtained using the smoothed pseudo-Wigner-Ville distribution in controlled environments. Affine transformation and principal component analysis were used to obtain eigenimages that provided species-specific acoustic features for each of the six fish species. The echo images of an unknown fish species, acquired in real time and in a fully automated fashion, were identified by finding the smallest Euclidean or Mahalanobis distance between each combination of weight matrices of the test image of the fish species to be identified and of the eigenimage classes of each of six fish species in the training set. The experimental results showed that the Mahalanobis classifier performed better than the Euclidean classifier in identifying both single- and mixed-species groups of all species assessed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.861-863
• /
• 1998

F.I(Fault Indicator) is equipped in automatic switchs for Distibution Automation System(DAS), and plays important role of providing the information for picking out a fault section. The restrictive sentence that F.I doesn't react for the inrush current is in the F.I specification. Nevertheless F.I has sometimes mal-functioned on the DAS in Kang-Dong branch office of KEPCO for latest 2 years. This Paper Proved the causes of the mal-function, and proposed the new F.I specification and operation methods against the mal-function causes.