• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.387-392
• /
• 2006

In the environment where AGVs(Automated Guided Vehicles) operate concurrently in limited space, collisions. deadlocks, and livelocks which have negative effect on the productivity of AGVs occure more frequently. The accelerated motion of an AGV is also the factor that make the AGV routing more difficult because the accelerated motion makes it difficult to estimate the vehicle's exact travel time. In this study, we propose methods of avoiding collisions, deadlocks, and livelocks using OAR(Occupancy Area Reservation) table, and selecting best route by estimating the travel time of an AGV in accelerated motion. A time-driven simulation validated the effectiveness of the proposed methods.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.747-753
• /
• 2005

In this paper, as an anti-sway control strategy of container cranes, we investigate a variable structure control in which the moving load follows a given trajectory, whereas both the trolley and hoist controllers achieve their positioning problems. It is crucial, in an automated container terminal, that collisions should be avoided during the transference of containers from one place to another. It is also necessary, in the case of a quay crane, to select suitable loading and unloading trajectories of containers, so that possible collisions with surrounding obstacles are avoided. After a brief introduction of the mathematical model, a robust control scheme (i.e., a second-order sliding mode control that guarantees a fast and precise transference and a suppression of the resulted swing) is presented. Despite model uncertainties and unmodeled actuators dynamics, the swing suppression from the given trajectory is obtained by constraining the system motion on suitable sliding surfaces, which include both the desired path and the swing angle. The proposed controller has been tested with a laboratory-size pilot crane. Experimental results are provided.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.216-218
• /
• 2007

세계 선진항만은 해운물류시장의 변화에 대응하고, 경쟁력 확보 방안으로 첨단 자동화 장비와 운영시스템 도입을 통한 자동화를 지향하고 있다. 국내 부산항 신항 또한 자동화 컨테이너터미널로 개발을 추진하고 있는 것으로 알려져 있다. 자동화 터미널은 각종 자동화 장비와 시스템이 유기적으로 구성되어 있으며, 이들의 효율적인 운영을 통해 생산성을 향상시킬 수 있다. 터미널의 안벽과 장치장 사이의 컨테이너 운송을 담당하는 이송장비는 컨테이너터미널의 핵심장비로 이의 효율적인 운영은 컨테이너터미널의 생산성과 직결되어 있다. 본 연구에서는 자동화 컨테이너터미널의 운영생산성 향상을 위한 하역장비와 이송장비의 운영방안에 대하여 연구한다. 특히 DHST(Dual Hoist Second Trolley)타입의 QC와 ASHC의 장비특성과 장비간의 연계작업을 고려하여, QC의 대기시간을 최소화하여 하역 생산성을 최대화할 수 있는 ASHC Dispatching Rule을 제시하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.720-725
• /
• 1997

This paper is to study the wind effect of the large scale gantry crane. It is used to control the sway of gantry crane in the loadingiunloading job of containers. I'hls is very important in the automated container terminal because the sway of handling equipments in pard is caused by thc l~nexpected disturbance such as wind and dynamic inertia by deriving force. This study shows the process of the modelling simulation of the wind effect of the sway motion of the gantry crane. Pro-Engineer, ANSYS and DAD'; ~ rr . used for 3D solid modelling and dynamic simulation. Though this study did not use the real parameters. the ; cwl ~ shows the trend of the wind effect is very large in the large scale crane and should be considered in design of the large scale gantry crane. In future, if the study is done by using the real parameters, the result is much more ~ise!'ul for dynamic control and design of gantry crane.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.703-707
• /
• 2000

This paper studied on the lateral motion of the gantry crane which is used for the automated container terminal. Though several problems are occurred in driving of gantry crane, they are solved by the motion by the operator. But, if the gantry crane is unmanned, it is automatically controlled without any human operation. Especially, the collision between wheel-flange and rail is a very critical problem in driving of unmanned gantry crane. To bring a solution to these problems, the lateral and yaw dynamic equations of the driving mechanism of gantry crane are derived. And this study used PD(Proportional-Derivative) Controller to control the lateral displacement and the yaw angle. The simulation result of the driving mechanism using the Runge-Kutta method is presented in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.107-107
• /
• 2000

This paper focuses on a method to connect mobile devices such as mobile robot, ACV and UTC with Profibus network. In this paper, the IEEE 802.11 wireless LAN is used for wireless extension of Frofibus, and four major issues are introduced to implement the wireless extended Profibus; First, the integration method between Profibus and IEEE 802.11 is introduced. Second, the implementation method of gateway is proposed. Three, the virtual polling mode algorithm is developed for satisfaction of real-time characteristics required in industrial network. Finally, we implement a experimental model, and carried out the performance analysis of wireless extended Profibus. This results show that wireless extended Profibus is suitable to industrial network such as automated container terminal.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.336-336
• /
• 2000

This paper studied on the yaw motion of the gantry crane which is used for the automated container terminal. Though several problems are occurred in driving of gantry crane, they are solved by the motion by the operator. But if the gantry crane is unmanned, it is automatically controlled without any human operation. There are two types, cone and flat typo in driving wheel shape. In cone type, lateral vibration and yaw motion of crane are issued. To bring a solution to these problems, the dynamic equation of the gantry crane driving mechanism is derived and it used PD(Proportional-Derivative) controller to control the lateral vibration. The simulation result of the driving mechanism using the Runge-Kutta method is presented in this paper.

• Journal of Navigation and Port Research
• /
• v.33 no.6
• /
• pp.443-450
• /
• 2009

In this paper, we propose optimizing a remarshaling plan in an automated stacking yard using a cooperative coevolutionary algorithm (CCEA). Remarshaling is the preparation task of rearranging the containers in such a way that the delay are minimized at the time of loading. A plan for remarshaling can be obtained by the following steps: first determining the target slots to which the individual containers are to be moved and then determining the order of movement of those containers. Where a given problem can be decomposed into some subproblems, CCEA efficiently searches subproblems for a solution. In our CCEA, the remarshaling problem is decomposed into two subproblems: one is the subproblem of determining the target slots and the other is that of determining the movement priority. Simulation experiments show that our CCEA derives a plan which is better in the efficiency of both loading and remarshaling compared to other methods which are not based on the idea of problem decomposition.

• Journal of Navigation and Port Research
• /
• v.44 no.5
• /
• pp.382-391
• /
• 2020

In line with the trend of global transport volume which has increased rapidly over the years, internal transportation in seaports is always conducted with high frequency. Thus, there is always much potential for traffic jams as well as high transportation costs and emissions. Many efforts have been initiated to streamline the inter-terminal container transport (ITT) through the development of automated vehicles and equipment as well as using private transport facilities to overcome these limitations. The purpose of this paper to develop a framework to design, analyze, and validate the efficiency of a new ITT system in a port area based on the monorail network and automatic vehicles. First, the number of shuttles and loaders was determined depending on the transport demand scenario. Next, a simulation model was applied to evaluate the system performance as well as gain more insight into the working process of the ITT system. Finally, by setting goals for the performance indicators, the results showed that the system was highly efficient with 100% of the containers delivered to their destination on time. Besides, a series of other performance tracking was provided to provide insight into the system's capabilities.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.333-335
• /
• 2022

The changes caused by the 4th industrial revolution are accelerating the convergence of technologies due to the COVID-19 Pandemic. As a result, rapid changes are expected in various fields of society and industry. The shipping and logistics industry is also in urgent need of smartization due to changes in environment and technology. However, in the case of Korea, the smartization of shipping and logistics technology is insufficient compared to that of advanced countries. For smartization for complex business processing with many related entities, smooth communication and visual confirmation using the latest technologies are becoming important. Such visualization and communication will become more important in smart shipping and logistics This study intends to present an integrated communication tool between self-driving ships and container terminals for the realization of smart shipping and logistics. In particular, a study was conducted on the development of a digital twin-based communication tool that satisfies the requirements of ship berthing and loading/unloading operations in which various actors participate and process complex tasks.