• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1712-1713
• /
• 2008

In this paper, we develop the vision control systems of auto tracking based on image processing techniques for video conference. The developed auto tracking vision control system consists of control hardware including vision, two dc motors and dc motor drivers. Image processing techniques are used to pixel of two images. Motion detection algorithm is applied to eliminate the noise. Experiment results are presented to illustrate the effectiveness and the applicability of the approaches proposed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.121-126
• /
• 1999

In this paper, to bring under robust and accurate control of auto-equipment systems which disturbance, parameter alteration of system, uncertainty and so forth exist, neural network controller called dynamic neural processor(DNP) is designed. In order to perform a elaborate task like as assembly, manufacturing and so forth of components, tracking control on the trajectory of power coming in contact with a target as well as tracking control on the movement course trajectory of end-effector is indispensable. Also, the learning architecture to compute inverse kinematic coordinates transformations in the manipulator of auto-equipment systems is developed and the example that DNP can be used is explained. The architecture and learning algorithm of the proposed dynamic neural network, the DNP, are described and computer simulations are provided to demonstrate the effectiveness of the proposed learning method using the DNP.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.187-187
• /
• 1999

in order to perform a elaborate task like as assembly, manufacturing and so forth of components, tracking control on the trajectory of power coming in contact with a target as well as tracking control on the movement course trajectory of end-effector is indispensable. In this paper, to bring under robust and accurate control of auto-equipment systems which disturbance, parameter alteration of system, uncertainty and so forth exist, neural network controller called dynamic neural processor(DNP) is designed. Also, the learning architecture to compute inverse kinematic coordinates transformations in the manipulator of auto-equipment system is developed and the example that DNP can be used is explained. The architecture and learning algorithm of the proposed dynamic neural network, the DNP, are described and computer simulation are provided to demonstrate the effectiveness of the proposed learning method using the DNP.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2299-2301
• /
• 2009

The adaptive IIR filters for active noise control systems are more effective when acoustic feedback exists, but the adaptive IIR filters could be unstable when the filter algorithm is not yet converged. In this paper, auto-secondary path estimation techniques and a stabilizing process for adaptive Multi-Channel Recursive LMS (MCRLMS) filters are developed to improve the stability of multi-channel active noise control systems. Experiments using a TMS320VC33 digital signal processor in a three dimensional enclosure have performed to show the effectiveness of the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.633-636
• /
• 1991

This paper describes the auto depth control system for underwater vehicle that can be used for both near surface and deeply submerged depthkeeping operations. This controller uses the fuzzy control algorithm and is implemented on the 16 bit microprocessor 8086 and coprocessor 8087. For verifying this system design, the digital simulator using PC-386 based T800 transputer is proto-totyped and the real time simulations show us satisfactory results.

• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.363-368
• /
• 2007

Most surgery illumination systems have been developed as passive systems. However, sometimes it is inconvenient to relocate the position of the illumination system whenever the surgeon changes his pose. To cope with such a problem, this study develops an auto-illumination system that is autonomously tracking the surgeon's movement. A 5-DOF serial type manipulator system that can control (X, Y, Z, Yaw, Pitch) position and secure enough workspace is developed. Using 3 ultrasonic sensors, the surgeon's position and orientation could be located. The measured data aresent to the main control system so that the robot can be auto-tracking the target. Finally, performance of the developed auto-illuminating system was verified through a preliminary experiment in the operating room environment.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.8
• /
• pp.774-781
• /
• 1991

This paper proposes an auto-tuning method of a discrete -PIC controllers which is based on the Ziegler and Nichols's PID Tuning Rule. This tunign rule is derived using the Pade's first order approximation and it prevents the performance degradation caused by the time-delay effect of zero order holder when the Ziegler-Nichols tuning rule is applied to a discrete PID controller. A simple and practical auto-tuning method is proposed through combining this discrete tuning rule with the relay control. The auto-tuning scheme is implemented on a microprocessor based system and is applied to a position control system to show the effectiveness of the discrete tuning rule.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.2
• /
• pp.168-173
• /
• 2006

This paper proposes an auto-focusing method for production of compact camera module (CCM). The CCM test handlers are mainly used in the final CCM production stage to test and adjust the lens focus of CCMs. To improve the productivity of CCM test handlers, we propose the auto-focusing method adjusting the lens focus efficiently. The max-min-difference (MMD) method is newly developed to compute the focus value efficiently, and two-stage searching method is also developed to find the best focus position quickly. Experimental results are presented to verify the usefulness of proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.31-34
• /
• 1995

The automated chemical analysis shop floor are developed for the environmental pollution problems in our chemical analysis center. This shop floor have the several equipments include weight, pour, dry, heater, boiler, mixture, spectroscopy etc. And the material handling components are made up by the stored stack, conveyore, turntables, robot etc. Computer simulation has been an important tool for these complete design problem. We have designed the arangement of chemical equipments and material flow systems by using the simulator "AutoModII". "AutoMoII" is one of the advanced simulator, CAD-like drawing tools with a powerful, engineering oriented language to model control logic and material flow. The result is the modeling of the chemical analysis system in accurate, three dimensional detail. We could designed the set able layout and scheduling system by using the AutoMoII simulator. AutoMoII simulator.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.12
• /
• pp.1019-1025
• /
• 2003

We introduce a new auto-calibration/simulation method for a strain gage type transducer/signal-conditioner which guarantees the output linearity and compensates the error automatically. We design a micro voltage supply which is able to interface either AC or DC type excitation voltage. A new strain gage simulator is also designed. We make linearity output of the signal conditioner and can compensate error automatically with this new auto calibration/simulation method. The experimental results show that the error between the real value and the expected one is less than 1%.