• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.47-55
• /
• 2003

In the development of positioning device for precision manufacturing and measuring, the friction from mechanical contact causes serious decrease of performance. In this study, we studied about variable reluctance type contact-free linear actuator to overcome drawbacks from friction. In the view of electromagnetics, we analyzed and derived theoretical magnetic force equation and designed structure for generating suspension and propulsion force simultaneously. In the view of dynamics, we derived equation of motion and identified the stability of the system. Finally, we verified the feasibility of the proposed system.

• Journal of the KSME
• /
• v.35 no.10
• /
• pp.917-923
• /
• 1995

회전체 진동은 주로 밸런싱에 의해 줄일수 있지만 위험속도에서 나타나는 회전체 진동은 종종 피할 수 없다. 전자기 베어링은 이러한 회전체 진동을 능동적으로 제어하는 방법으로써 사용된다. 비접촉으로 회전체에 힘을 작용하는 동흡진기(dynamic vibration absorber)는 기존의 것에 비해 새로운 것을 필요로 하지 않는 아주 간단한 방법이다. 영구자석으로 구성된 자석 댐퍼는 비접 촉동흡진기의 일종이지만 영구자석만으로는 적절한 감쇠 성능을 만족시킬 수 없다. 따라서 영 구자석과 전자석을 동시에 사용하는 하이브리드 자석이 넓은 운전영역에서 좋은 진동제어 성능을 자지기 때문에 유용하다. 전력공급의 편리성을 위해서 하이브리드 자석을 합진기쪽에 설치하고 여러 개의 편으로 된 영구자석은 회전체의 주위에 부착하였다. 본 연구의 목적은 수직 회전 체(vertical rotor)의 진동을 제어하기 위해서 전자기력을 이용하는 하이브리드 관성 댐퍼를 개 발하는 것이다. 지금까지 전자석을 이용한 진동제어는 여러 저자에 의해 연구되어 왔으며 자기 베어링은 회전체의 진동을 제어하기 위한 전형적인 예이다. 그러나 회전체에 능동관성 댐퍼를 직접 적용한 예는 없었다. 이동흡진기는 전자석의 반발력(repulsive force)을 이용하고 흡진기의 운동에 의해 에너지가 감쇠된다. 반면에 자기 베어링에서는 전자석의 흡인력(attractive force)을 이용한다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.250-253
• /
• 2007

Since Mg alloy has many attractive advantages among the practically used metals, many researchers have been studied to develop useful process and material. The crystal structure of Magnesium was hexagonal close-packed, so its formability was poor at room temperature. But formability was improved in high temperature with increasing of slip planes, twins, dynamic recrystallization. In this study The formability of AZ31B magnesium sheet is estimated according to the variable temperatures, forming speed, thickness, blank holding force. The results of deep drawing experiences show that the formability is well at the range from 200 to $250^{\circ}C$, 20 to 60 mm/min forming speed and 2.5 to 3KN blank holding force.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.342-348
• /
• 2012

This paper presents a moving-magnet type linear actuator designed by using flux concentration type permanent magnet arrangement, which can generate higher magnetic flux density in air-gap. In this construction, detent force which is induced by both slot-effect and end-effect becomes larger due to strong attractive forces. To reduce cogging force we have employed a modular mover structure of two magnetic pole sections connected with a center yoke. The improved motor performance is demonstrated with the prototype machine.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1041-1046
• /
• 2004

A proportional pressure control valve has a nonmagnetic ring which is inserted in between a coil and plunger and it can get attraction force in proportion to input current by an influence of control cone. Therefore, a proportional pressure control valve is applied to a servo system as substitution of servo valve and an on-off solenoid valve widely because control of a high level is possible and pollution level is low. The purpose of this study is to develop domestic model of a proportional pressure control valve, and a test model was designed and manufactured through valve system analysis and finite element analysis. And comparison between results of theoretical analysis and static / dynamic characteristics test were carried out on a manufactured test model, and it was confirmed that it has excellent performance in comparison with other foreign products.

• Asian Journal of Business Environment
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2023

Purpose: This study aims to understand the potential of destinations, accessibility and accommodation services of Vietnam and India for the purpose of cooperation in tourism development. Research design, data and methodology: The data was mainly based on Tourism statistics at a glance of India Vietnam National Administration of Tourism, and Ministry of Culture, Sports and Tourism of Vietnam between the two countries. The qualitative research was supported by a case study methodology. Documentary sources were used as collection instruments, which allowed the characterisation of Vietnam - India as well as interviews applied within a focus group, supported by a semi-structured script. Result: The results of the study indicate that Vietnam - India understand the importance of cooperation to obtain synergies that ensure the development of tourism; Government of two countries recognize and identify a set of benefits associated with cooperation and have a collective awareness of some of the difficulties associated with it, but which do not necessarily prevent their willingness to cooperate. Conclusion: The strength of tourism development between the two countries is great, in which the relationship between "attractive force - propulsive force" is not commensurate with the tourism potential of Vietnam - India.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.455-462
• /
• 2000

The objective of this study was to examine the physicochemical characteristics of coagulation reaction between loess and red tide organisms (RTO) and its feasibility, in developing a technology for the removal of RTO bloom in coastal sea. The physicochemical characteristics of loess were examined for a particle size distribution, surface characteristics by scanning electron microscope, zeta potential, and alkalinity and pH variations in sea water. Two kinds of RTO that were used in this study, Cylindrothen closterium and Skeietonema costatum, were sampled in Masan bay and were cultured in laboratory. Coagulation experiments were conducted using various concentrations of loess, RTO, and a jar tester. The supernatant and RTO culture solution were analyzed for pH, alkalinity, RTO cell number. A negative zeta potential of loess increased with increasing pH at $10^(-3)M$ NaCl solution and had -71.3 mV at pH 9.36. Loess had a positive zeta potential of +1,8 mV at pH 1.98, which resulted in a characteristic of material having an amphoteric surface charge. In NaCl and $CaCl_2$, solutions, loess had a decreasing negative zeta potential with increasing $Na^+\;and\;Ca^(+2)$ ion concentration and then didn't result in a charge reversal due to not occurring specific adsorption for $Na^+$ ion while resulted in a charge reversal due to occurring specific adsorption for $Ca^(+2)$ ion. In sea water, loess and RTO showed the similar zeta potential values of -112,1 and -9.2 mV, respectively and sea sand powder showed the highest zeta potential value of -25.7 mV in the clays. EDLs (electrical double-layers) of loess and RTO were extremely compressed due to high concentration of salts included in sea water, As a result, there didn't almost exist EDL repulsive force between loess and RTO approaching each other and then LVDW (London-yan der Waals) attractive force was always larger than EDL repulsive force to easily form a floe. Removal rates of RTO exponentially increased with increasing a loess concentration. The removal rates steeply increased until $800 mg/l$ of loess, and reached $100{\%}$ at 6,400 mg/l of loess. Removal rates of RTO exponentially increased with increasing a G-value. This indicated that mixing (i.e., collision among particles) was very important for a coagulation reaction. Loess showed the highest RTO removal rates in the clays.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.129-135
• /
• 2014

In the paper, we propose a design method for the logistics transportation system using magnetic levitation that has a good characteristics without mechanical friction, noise and dust. The proposed transportation system consists of a levitation control system and a propulsion control system. Magnetic levitation system is an electromagnetic suspension system in which electromagnet generates magnetic attractive force and the attractive force pulls the rail. We design a PID controller for the current control of electromagnets. We use linear induction motors for propulsion of the proposed logistics transportation system and adapt the space vector PWM method for the propulsion control system. The proposed transportation system using magnetic levitation is verified performances through levitation and propulsion experiments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.6
• /
• pp.716-722
• /
• 2003

This study determined the optimum dosage for coagulation reactions of red tide organisms (RTO) using a combination of ignited oyster shell powder (10sp) and loess and examined the electrokinetic and rheological characteristics of their flocs. Two kinds of RTO, Cylindrotheca closterium and Skeletonema costatum, were sampled in Masan Bay and cultured in the laboratory. Coagulation experiments were conducted using various concentrations of IOSP, loess, IOSP+1oess, RTO, and a jar tester RTO cell numbers were counted for both the supernatant and RTO culture solution. The removal rates increased rapidly with increasing IOSP concentrations up to 50 mg/L and loess concentrations up to 800 mg/L. A removal rate of $100\%$ was reached at 400 mg/L of IOSP and 6,400 mg/L of loess. The highest increment $(16.7\%)$ of the rates of coagulation reaction occurred using both IOSP and loess (50+200 mg/L) in comparison with IOSP alone. The rate of coagulation reaction using both IOSP and loess (50+200 mg/L), $90.6\%,$ was similar to employing either IOSP of 150 mg/L or loess of 3,200 mg/L. All of the coagulation liquids for RTO, IOSP (200 mg/L), loess (200 ma/L), and IOSP+1oess (200+200 mg/L) revealed non-Newtonian fluid properties and therefore their shear rate vs. shear stress curves were non-linear. The coagulation liquids revealed elastic body properties at a lower shear rate increasing in the following order: RTO, IOSP (200 mg/L), loess (200 mg/L), and IOSP+1oess (200+200 mg/L. IOSP+1oess (200+200 mg/L) especially demonstrated plastic flow properties at a lower shear rate.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.3
• /
• pp.103-113
• /
• 2015

This study is an evaluation index development research based on Gyeongju Historic Heritage Sites to identify the attractive Properties of Gyeongju, which decided to competitiveness of the historical city. We got the export Indicator candidate groups by the literature reviews and UNESCO, ICOMOS, and 49 Indicator candidate groups had been selected. In the end, we chose 42 attraction indexes in charm of the cultural heritage side, Cultural heritage tourism resources Side, Restraining force Heritage tourism Side three aspects based on the analysis of Importance(M), Standard deviation(SD), Content Validity Ratio(CVR), Agreement, convergence by using Delphi Technique. We can determine these indicators will be useful basic information, for improving the city's historic attractions. In the future, used these indicators as a basis for Attractions effectiveness evaluation of Gyeongju, Through which the attractions of Gyeongju can be re-recognized.