• 제목/요약/키워드: attenuation pole

검색결과 56건 처리시간 0.029초

감쇠극을 갖는 적층형 세라믹 칩 필터의 설계 (Design of Multilayer Ceramic Chip Band pas Filter with an attenuation pole)

  • 강종윤;심성훈;최지원;박용욱;윤석진;김현재
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집
    • /
    • pp.123-126
    • /
    • 2002
  • A proposed multi-layer ceramic (MLC) chip type band-pass filter (BPF) is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coulped stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The passband and attenuation pole depend the coupling between resonators and coupling capacitance. The frequency characterics of the passband and attenuation pole are analysed with the variance of the coupling between resonators and coupling capacitance. An equivalent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the BPF is well acceptable for IMT-2000 application.

  • PDF

감쇠극을 갖는 적층형 세라믹 칩 필터의 설계 (Design of Multilayer Ceramic Chip Band Pass Filter with an Attenuation Pole)

  • 강종윤;심성훈;최지원;박용욱;이동윤;윤석진;김현재
    • 한국전기전자재료학회논문지
    • /
    • 제16권8호
    • /
    • pp.740-743
    • /
    • 2003
  • A multi-layer ceramic (MLC) chip type band-pass filter (BPF) is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coulped stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The passband and attenuation pole depend on the coupling between resonators and coupling capacitance. The frequency characterics of the passband and attenuation pole are analyzed with the variation of the coupling between resonators and coupling capacitance. An equivanlent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the BPF is well acceptable for IMT-2000 application.

Analysis of Attenuation Poles using Closed-form Solutions for Bandpass Filters

  • Shin, Yoon-mi;Lee, Bom-Son
    • Journal of electromagnetic engineering and science
    • /
    • 제1권2호
    • /
    • pp.156-160
    • /
    • 2001
  • Very convenient equivalent circuits fur the design of bandpass filters with an attenuation pole in the lower or upper stopband are provided together with necessary closed-form solutions. The proposed approach gives us much flexibility and simplifies the design of inserting attenuation poles.

  • PDF

저지 대역에 2개의 감쇠극을 갖는 변형된 Generalized Chebyshev Filter (The Modified Generalized Chebyshev Filter with Two Attenuation Poles in Stopband)

  • 김인선
    • 한국전자파학회논문지
    • /
    • 제16권4호
    • /
    • pp.438-446
    • /
    • 2005
  • 본 논문에서 변형된 generalized Chebyshev 유리함수가 제시되었다. 이 함수를 이용한 회로망 합성으로 새로운 원형 저역 통과 필터의 소자값이 구해졌다. 이 제안된 필터는 기존의 generalized Chebyshev 필터와 마찬가지로 통과 대역에서 등리플을 갖지만 유한 주파수에서 오직 하나의 감쇠극을 갖는 기존의 필터와는 달리, 제안된 필터는 저지 대역에서 서로 다른 두 개의 감쇠극을 갖는다. 만약 고조파가 두 번째 감쇠극 주파수에 맞춰진다면, 고조파를 효과적으로 억제할 수 있다. 게다가, 두 번째 감쇠극의 위치는 임의로 조정될 수 있기 때문에 제안한 필터는 넓은 저지 대역 구현에 특히 유용하다.

Negative Group Delay Circuit with Improved Signal Attenuation and Multiple Pole Characteristics

  • Chaudhary, Girdhari;Jeong, Junhyung;Kim, Phirun;Jeong, Yongchae
    • Journal of electromagnetic engineering and science
    • /
    • 제15권2호
    • /
    • pp.76-81
    • /
    • 2015
  • This paper presents a design of a transmission line negative group delay (NGD) circuit with multiple pole characteristics. By inserting an additional transmission line into a conventional NGD circuit, the proposed circuit provides further design parameters to obtain wideband group delay (GD) and to help reduce signal attenuation. As a result, the number of gain compensating amplifiers can be reduced, which can contribute to stable operation when integrated into RF systems. The multiple pole characteristics can provide wider NGD bandwidth and can be obtained by connecting resonators with slightly different center frequencies separated by quarter-wavelength transmission lines. For experimental validation, an NGD circuit with two poles GD characteristic is designed, simulated, and measured.

차세대 이동통신 단말기에 이용되는 적층 칩 필터 설계 및 제작 (Design and Fabrication of Multilayer Chip Filter for Next Generation Mobile Communication Phone)

  • 이석원;윤중락
    • 한국전기전자재료학회논문지
    • /
    • 제13권7호
    • /
    • pp.583-591
    • /
    • 2000
  • It this paper the multilayer chip band pass filter for next generation mobile communication phone is fabricated and designed. For the design the multilayer chip filter of non-contented equivalent circuit and contented equivalent circuit with attenuation pole is presented. Finally it is fabricated and designed using the multilayer chip filter of contented equivalent circuit with attenuation pole. The size insertion loss center frequency and band width of multilayer chip filter are 4.5$\times$3.2$\times$2.0[mm], 3.0[d.B] and 1945$\pm$25 MHz respectively. The multilayer chip filter was fabricated by screen printing with Ag electrode after tape casting. Simulation results of multilayer chip filter are compared with experimental results and found to be in excellent agreements.

  • PDF

1-9GHz대의 적층 칩 세라믹 대역 통과 필터 설계 및 시뮬레이션 (Design and Simulation of the laminated planar chip ceramic bandpass filter for 1.9GHz)

  • 김지균;이헌용;윤중락;김민석
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 춘계학술대회 논문집
    • /
    • pp.339-342
    • /
    • 1998
  • A high performance, high-dielectric stripline filter has been developed. The filter consists of planar resonators and its structure is made of high permittivity multilayer ceramic. The performance is distinctive with its attenuation pole. An equivalent lumped circuit is derived to explain the behavior of the attenuation pole quantitatively. A precise design procedure is also described.

  • PDF

개선된 저지 대역을 갖는 변형된 일반화된 체비셰프 저역 통과 필터 설계 (A Modified Generalized Chebyshev LPF Design with Improved Stopband)

  • 김인선;김광수;임종식;안달
    • 한국전자파학회논문지
    • /
    • 제16권11호
    • /
    • pp.1155-1163
    • /
    • 2005
  • 본 논문에서는 필터의 손실이나 크기의 증가 없이 저지 대역을 현저히 화장시킬 수 있는 새로운 방법을 제안하였다. 제안한 저역 통과 필터는 기존에 발표된 변형된 일반화된 체비셰프(MU: Modified Generalized Chebyshev)저역 통과 필터와 외형상 소자의 구성이 유사하지만 필터의 소자값이 서로 완전히 다르다. 기존의 MGC 필터는 두 번째 감쇠극만을 고조파 제거(또는 억제)에 사용했지만, 반면에 제안한 필터는 두 번째 감쇠극뿐만 아니라 첫 번째 감쇠극의 3차 고조파를 적절히 이용함으로서 저지 대역 특성이 기존의 MGC 필터보다 우수하다. 제안한 이론에 따라 저역 통과 필터를 제작하였고, 제작된 필터의 측정으로부터 제안된 필터는 저지 대역폭이 전형적인 GC(Generalized Chevbyshev)필터에 비해 4배 이상, 기존의 MGC 필터보다 1.7배 이상의 넓은 범위에 이름을 확인할 수 있다.

감쇠극을 갖는 마이크로스트립 듀플렉서 설계 (Design of Microstrip Duplexer with Attenuation Poles)

  • 최오석;남훈;임영석
    • 한국전자파학회논문지
    • /
    • 제14권9호
    • /
    • pp.924-930
    • /
    • 2003
  • 감쇠극을 갖는 새로운 소형화된 마이크로스트립 듀플렉서를 제안한다. 2개의 3-극 대역통과 CT필터를 서로 비대칭적인 전송영점을 갖도록 설계 및 제작하였다. 제안된 3-극 대역통과 CT 필터는 결합구조를 변화시켜 감쇠극의 위치를 원하는 주파수 대역으로 옮길 수 있을 뿐만 아니라 필터의 저지대역 차단 특성을 향상시킬 수 있다. 교차 결합 대역통과 CT 필터를 이용한 듀플렉서의 측정결과 일반적인 필터를 이용한 경우보다 우수한 격리도와 차단 특성을 나타냈고, 시뮬레이션 결과와 거의 일치하였다.

감쇄극을 갖는 초소형 적층 LTCC 대역통과 필터 (Miniature Multilayer LTCC Bandpass Filter with Attenuation poles)

  • 이영신;송희석;방규석;김준철;박종철
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.751-755
    • /
    • 2003
  • In this paper, We proposed compact multi-layer LTCC (Low Temperature Cofired Ceramic) bandpass filter for Bluetooth module. A ${\lambda}/4$ coupled stripline resonators are designed, which composed of coupled strip-line section and loading capacitance. This resonator with a loading capacitor has slow-wave characteristics. Due to the slow-wave effect of the proposed resonator, it is possible to design and fabricate a compact bandpass filter with a wide upper stop band. Attenuation poles in the lower stop band are achieved using controlling of electro-magnetic coupling between resonators. Using multi-layer LTCC technology, we designed and fabricated band pass filter with a finite attenuation pole and wide upper stopband. The overall size of the filter is $1.2{\times}2.0{\times}1.0mm^3$.

  • PDF